pinout.vvzero.com/src/en/pin/pin-10.md

This pin doubles up as the UART receive pin, RX. It's also commonly known as "Serial" and, by default, will output a Console from your Pi that, with a suitable Serial cable, you can use to control your Pi via the command-line.

The UART pins are useful for setting up a "headless" Pi (a Pi without a screen) and getting it connected to a network.

UART can be used to talk to Serial GPS modules or sensors such as the PM5003, but you must make sure you disable the Serial Console in raspi-config first.

On the Pi 3 and 4 the UART is, by default, used for Bluetooth and you may need to add "dtoverlay=miniuart-bt" to "/boot/config.txt" to achieve a stable.

[Learn more about UART](/pinout/uart)

[Raspberry Pi UART documentation](https://www.raspberrypi.org/documentation/configuration/uart.md)
Content tweaks for #375 2020-08-26 03:08:38 +08:00			`This pin doubles up as the UART receive pin, RX. It's also commonly known as "Serial" and, by default, will output a Console from your Pi that, with a suitable Serial cable, you can use to control your Pi via the command-line.`
Added more pin content 2015-03-25 08:29:41 +08:00
Content tweaks for #375 2020-08-26 03:08:38 +08:00			`The UART pins are useful for setting up a "headless" Pi (a Pi without a screen) and getting it connected to a network.`
various changes to pin descriptions + overlay changelog 2015-11-09 16:49:57 +08:00
Content tweaks for #375 2020-08-26 03:08:38 +08:00			`UART can be used to talk to Serial GPS modules or sensors such as the PM5003, but you must make sure you disable the Serial Console in raspi-config first.`
Added more pin content 2015-03-25 08:29:41 +08:00
Content tweaks for #375 2020-08-26 03:08:38 +08:00			`On the Pi 3 and 4 the UART is, by default, used for Bluetooth and you may need to add "dtoverlay=miniuart-bt" to "/boot/config.txt" to achieve a stable.`

			`[Learn more about UART](/pinout/uart)`

			`[Raspberry Pi UART documentation](https://www.raspberrypi.org/documentation/configuration/uart.md)`