pinout.vvzero.com/src/en/overlay/piglow.md

<!--
---
class: board
type: led
name: PiGlow
manufacturer: Pimoroni
description: Simply 18 LEDs in a spiral pattern controllable in Python.
url: https://github.com/pimoroni/piglow
github: https://github.com/pimoroni/piglow
buy: http://shop.pimoroni.com/products/piglow
formfactor: '26-way'
pincount: 26
eeprom: no
power: 3v3,5v
pin:
  '3':
    mode: i2c
  '5':
    mode: i2c
-->
#PiGlow

The PiGlow is a small add-on board for the Raspberry Pi that provides 18 individually controllable LEDs.

The board uses the SN3218 8-bit 18-channel PWM chip to drive surface mount LEDs. Communication is done via I2C over the GPIO header with a bus address of 0x54. Each LED can be set to a PWM value of between 0 and 255.

To get the module set up and ready to go you can use the one-line product installer:

```bash
curl -sS get.pimoroni.com/piglow | bash
```

And follow the instructions!
Total architectural change to embedded Yaml 2015-04-11 06:32:08 +08:00			`<!--`
			`---`
class+type categorisation 2016-01-31 19:03:17 +08:00			`class: board`
			`type: led`
Total architectural change to embedded Yaml 2015-04-11 06:32:08 +08:00			`name: PiGlow`
			`manufacturer: Pimoroni`
new type field and standardising field order 2015-12-30 01:49:41 +08:00			`description: Simply 18 LEDs in a spiral pattern controllable in Python.`
Total architectural change to embedded Yaml 2015-04-11 06:32:08 +08:00			`url: https://github.com/pimoroni/piglow`
			`github: https://github.com/pimoroni/piglow`
			`buy: http://shop.pimoroni.com/products/piglow`
new type field and standardising field order 2015-12-30 01:49:41 +08:00			`formfactor: '26-way'`
Total architectural change to embedded Yaml 2015-04-11 06:32:08 +08:00			`pincount: 26`
new type field and standardising field order 2015-12-30 01:49:41 +08:00			`eeprom: no`
some power info for testing 2015-12-18 09:16:57 +08:00			`power: 3v3,5v`
Total architectural change to embedded Yaml 2015-04-11 06:32:08 +08:00			`pin:`
			`'3':`
			`mode: i2c`
			`'5':`
			`mode: i2c`
			`-->`
Pillow blurb added + removed power pins 2015-11-16 03:45:19 +08:00			`#PiGlow`

			`The PiGlow is a small add-on board for the Raspberry Pi that provides 18 individually controllable LEDs.`

			`The board uses the SN3218 8-bit 18-channel PWM chip to drive surface mount LEDs. Communication is done via I2C over the GPIO header with a bus address of 0x54. Each LED can be set to a PWM value of between 0 and 255.`

			`To get the module set up and ready to go you can use the one-line product installer:`

			```bash
			`curl -sS get.pimoroni.com/piglow \| bash`
			```

			`And follow the instructions!`