diff --git a/draft/boards/fepi-audio.png b/draft/boards/fepi-audio.png
new file mode 100644
index 0000000..4acf8bf
Binary files /dev/null and b/draft/boards/fepi-audio.png differ
diff --git a/draft/overlay/fepi-audio.md b/draft/overlay/fepi-audio.md
new file mode 100644
index 0000000..c1e9e25
--- /dev/null
+++ b/draft/overlay/fepi-audio.md
@@ -0,0 +1,67 @@
+<!--
+---
+name: Fe-Pi Audio Card
+class: board
+type: audio
+formfactor: HAT
+manufacturer: Fe-Pi
+collected: Other
+description: A complete audio solution for the Raspberry Pi
+url: https://fe-pi.com/products/fe-pi-audio-v1
+buy: https://fe-pi.com/products/fe-pi-audio-v1
+image: 'fepi-audio.png'
+pincount: 40
+eeprom: no
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '12':
+    name: BCLK (Bit Clock)
+    mode: i2s
+  '35':
+    name: LRCLK (Left/Right Clock)
+    mode: i2s
+  '38':
+    name: DIN (Data In)
+    mode: i2s
+  '40':
+    name: DOUT (Data Out)
+    mode: i2s
+i2c:
+  '0x0a':
+    name: SGTL5000
+    device: SGTL5000XNAA3/R2
+-->
+#Audio Z
+
+The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
+
+## Features ##
+
+* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use. 
+* Raspberry Pi 2, 3 PCB footprint.
+* SGTL5000 low power stereo codec.
+* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
+* RCA jacks for stereo Line In, and Line Out.
+* 4 pin screw terminal for Speaker Out.
+* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used! 
+* ADC > 90 dB SNR and -72 dB THD+N
+* Line-Out > 100 dB SNR and -85 dB THD+N
+* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
+* Speaker Output > 1.4W per channel, into 8 ohms.
+* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
+* 2x20pin 2.54mm female header included!