ab-1-wire-zero part1
This commit is contained in:
parent
a15eb58dfa
commit
0075e50651
|
@ -0,0 +1,45 @@
|
|||
<!--
|
||||
---
|
||||
name: 1 Wire Pi Zero
|
||||
class: board
|
||||
type: com
|
||||
formfactor: pHAT
|
||||
manufacturer: AB Electronics
|
||||
description: 1-Wire to I2C host interface
|
||||
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||
github: https://github.com/abelectronicsuk
|
||||
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||
image: 'ab-1-wire-pi-zero.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
#1 Wire Pi Zero
|
||||
|
||||
The 1 Wire Pi Zero from AB Electronics UK is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi Zero. A 5V buffered I2C port is also provided on the board.
|
||||
|
||||
The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wire® bridge device. The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices. An ESD Protection Diode is used to protect the 1 Wire Pi Zero and Raspberry Pi from electrostatic spikes on the 1-Wire® port. Connections to the 1-Wire® port can be made through the RJ-12 socket or the solder points on the PCB.
|
||||
|
||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
||||
|
||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
Loading…
Reference in New Issue