diff --git a/draft/boards/sixfab_cellular_shield.png b/draft/boards/sixfab_cellular_shield.png deleted file mode 100644 index 6dcabab..0000000 Binary files a/draft/boards/sixfab_cellular_shield.png and /dev/null differ diff --git a/draft/boards/sixfab_gps_shield.png b/draft/boards/sixfab_gps_shield.png deleted file mode 100644 index 5308fad..0000000 Binary files a/draft/boards/sixfab_gps_shield.png and /dev/null differ diff --git a/draft/boards/sixfab_xbee_shield.png b/draft/boards/sixfab_xbee_shield.png deleted file mode 100644 index cda7028..0000000 Binary files a/draft/boards/sixfab_xbee_shield.png and /dev/null differ diff --git a/draft/overlay/sixfab_cellular_shield.md b/draft/overlay/sixfab_cellular_shield.md deleted file mode 100644 index 8a09655..0000000 --- a/draft/overlay/sixfab_cellular_shield.md +++ /dev/null @@ -1,42 +0,0 @@ - -# Sixfab 3G/4G/LTE Base Shield - -This is a cellular add-on board for the Raspberry Pi enabling you to get up to 100 Mbps down and 50 Mbps -depending on which cellular module you have installed. - -Also using the USB connector you can use the shield with Linux, Windows and Android. diff --git a/draft/overlay/sixfab_gps_shield.md b/draft/overlay/sixfab_gps_shield.md deleted file mode 100644 index 78e020b..0000000 --- a/draft/overlay/sixfab_gps_shield.md +++ /dev/null @@ -1,47 +0,0 @@ - -# Sixfab GPS Shield - -This is an easy way to add GPS to your pi - -Some features include: -* Location, Time, Speed all on the same NMEA Protocol -* Built in 1-Wire support -* Built in antenna -* Also programmable from Linux, MacOS, Windows, Android diff --git a/draft/overlay/sixfab_xbee_shield.md b/draft/overlay/sixfab_xbee_shield.md deleted file mode 100644 index 2258f13..0000000 --- a/draft/overlay/sixfab_xbee_shield.md +++ /dev/null @@ -1,46 +0,0 @@ - -# Sixfab XBee Shield - -This add-on board allows you to use XBee modules easily with your Pi. -Some features include: -* Headers fit most XBee modules -* Up to 28 miles range -* Point to point communication -* Communication LED's -* Programable from Linux, Windows and Android diff --git a/src/de/translate/zero-lipo.md b/src/de/translate/zero-lipo.md index 9b277c9..22312d0 100644 --- a/src/de/translate/zero-lipo.md +++ b/src/de/translate/zero-lipo.md @@ -21,12 +21,18 @@ pin: mode: input active: high --> -#Zero LiPo +# Zero LiPo The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible. The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi. +To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run: + +```bash +curl https://get.pimoroni.com/zerolipo | bash +``` + Features: * 0.8mm thick PCB diff --git a/src/en/overlay/zero-lipo.md b/src/en/overlay/zero-lipo.md index 9b277c9..22312d0 100644 --- a/src/en/overlay/zero-lipo.md +++ b/src/en/overlay/zero-lipo.md @@ -21,12 +21,18 @@ pin: mode: input active: high --> -#Zero LiPo +# Zero LiPo The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible. The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi. +To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run: + +```bash +curl https://get.pimoroni.com/zerolipo | bash +``` + Features: * 0.8mm thick PCB diff --git a/src/es/overlay/zero-lipo.md b/src/es/overlay/zero-lipo.md index c7a046e..96d532f 100644 --- a/src/es/overlay/zero-lipo.md +++ b/src/es/overlay/zero-lipo.md @@ -21,12 +21,16 @@ pin: mode: input active: high --> -#Zero LiPo +# Zero LiPo El objetivo de Zero LiPo es ser la fuente de alimentación para Raspberry Pi más compacta. Esta placa inclute LEDs indicadores de alimentación y bajo nivel de batería, además de un conector JST para conectar una batería LiPo, LiIon o cualquier otra batería compatible con JST. El convertidor TPS61232 step-up de Texas Instruments convierte el voltaje de 3-4.2V de entrada de las LiPo/LiIon en 5V, dando una alimentación de 5V estable perfecta para tu Pi. +```bash +curl https://get.pimoroni.com/zerolipo | bash +``` + Especificaciones: * PCB de 0.8 mm de grosor diff --git a/src/fr/translate/zero-lipo.md b/src/fr/translate/zero-lipo.md index 9b277c9..22312d0 100644 --- a/src/fr/translate/zero-lipo.md +++ b/src/fr/translate/zero-lipo.md @@ -21,12 +21,18 @@ pin: mode: input active: high --> -#Zero LiPo +# Zero LiPo The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible. The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi. +To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run: + +```bash +curl https://get.pimoroni.com/zerolipo | bash +``` + Features: * 0.8mm thick PCB diff --git a/src/it/translate/zero-lipo.md b/src/it/translate/zero-lipo.md index 9b277c9..22312d0 100644 --- a/src/it/translate/zero-lipo.md +++ b/src/it/translate/zero-lipo.md @@ -21,12 +21,18 @@ pin: mode: input active: high --> -#Zero LiPo +# Zero LiPo The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible. The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi. +To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run: + +```bash +curl https://get.pimoroni.com/zerolipo | bash +``` + Features: * 0.8mm thick PCB diff --git a/src/tr/translate/zero-lipo.md b/src/tr/translate/zero-lipo.md index 9b277c9..22312d0 100644 --- a/src/tr/translate/zero-lipo.md +++ b/src/tr/translate/zero-lipo.md @@ -21,12 +21,18 @@ pin: mode: input active: high --> -#Zero LiPo +# Zero LiPo The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible. The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi. +To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run: + +```bash +curl https://get.pimoroni.com/zerolipo | bash +``` + Features: * 0.8mm thick PCB