Update EduKit 3 controller markdown to fix deployment errors
This commit is contained in:
parent
9880cf7aae
commit
10429d0978
|
@ -5,34 +5,33 @@ class: board
|
||||||
type: motor
|
type: motor
|
||||||
formfactor: Custom
|
formfactor: Custom
|
||||||
manufacturer: PiHut
|
manufacturer: PiHut
|
||||||
description: A motor controller board to control two motor channels and break out unused pins. Please note: pinouts for the original version and the new version are the same.
|
description: A motor controller board to control two motor channels and break out unused pins. Please note, pinouts for the original version and the new version are the same.
|
||||||
url: https://camjam.me/?page_id=1035
|
url: https://camjam.me/?page_id=1035
|
||||||
buy: https://thepihut.com/collections/camjam-edukit/products/camjam-edukit-3-robotics
|
buy: https://thepihut.com/collections/camjam-edukit/products/camjam-edukit-3-robotics
|
||||||
github: https://github.com/CamJam-EduKit/EduKit3/
|
github: https://github.com/CamJam-EduKit/EduKit3/
|
||||||
image: 'camjam-edukit-3-motor-controller.png'
|
image: 'camjam-edukit-3-motor-controller.png'
|
||||||
pincount: 26
|
pincount: 26
|
||||||
eeprom: no
|
eeprom: no
|
||||||
power:'3v3,5v'
|
|
||||||
pin:
|
pin:
|
||||||
'9':
|
'21':
|
||||||
name: MotorA_0
|
name: MotorA_0
|
||||||
mode: output
|
mode: output
|
||||||
'10':
|
'19':
|
||||||
name: MotorA_1
|
name: MotorA_1
|
||||||
mode: output
|
mode: output
|
||||||
'7':
|
'26':
|
||||||
name: MotorB_0
|
name: MotorB_0
|
||||||
mode: output
|
mode: output
|
||||||
'8':
|
'24':
|
||||||
name: MotorB_1
|
name: MotorB_1
|
||||||
mode: output
|
mode: output
|
||||||
-->
|
-->
|
||||||
# CamJam EduKit 3 motor controller board
|
# CamJam EduKit 3 motor controller board
|
||||||
|
|
||||||
This motor controller board is part of CamJam EduKit 3 - Robotics but is also available separately from The Pi Hut. It provides two motor outputs for 6V motors using a DRV8833 H Bridge and breaks out most of the unused pins to a female header on top of the board.
|
This motor controller board is part of CamJam EduKit 3 - Robotics but is also [available separately from The Pi Hut](https://thepihut.com/products/camjam-edukit-motor-controller). It provides two motor outputs for 6V motors using a DRV8833 H Bridge and breaks out most of the unused pins to a female header on top of the board.
|
||||||
|
|
||||||
Pins that are broken out to the header are as follows: 5v, 3v3, SDA and SCL (for I2C devices), 4, 17, 18, 22, 23, 24, 25, 27, and Ground.
|
Pins that are broken out to the header are as follows: 5v, 3v3, SDA and SCL (for I2C devices), 4, 17, 18, 22, 23, 24, 25, 27, and Ground.
|
||||||
|
|
||||||
The board expects 4 AA batteries to be used to power the board, although it will accept up to 10V if you have more powerful motors available. A flyback diode is provided to protect your board and Raspberry Pi if you should accidentally wire up the power source the wrong way around.
|
The board expects 4 AA batteries to be used to power the board, although it will accept up to 10V if you have more powerful motors available. A flyback diode is provided to protect your board and Raspberry Pi if you should accidentally wire up the power source the wrong way around.
|
||||||
|
|
||||||
The motor controller board was designed by Rachel Rayns for The Pi Hut. Educational material was written by Tim Richardson and tested by Michael Horne over at CamJam.
|
The motor controller board was designed by Rachel Rayns for The Pi Hut. Educational material was written by [Tim Richardson](https://twitter.com/Geeky_Tim) and tested by [Michael Horne](https://twitter.com/recantha) over at [CamJam](https://camjam.me/edukit).
|
||||||
|
|
Loading…
Reference in New Issue