diff --git a/resources/boards/fepi-audio.png b/resources/boards/fepi-audio.png new file mode 100644 index 0000000..4acf8bf Binary files /dev/null and b/resources/boards/fepi-audio.png differ diff --git a/src/de/settings.yaml b/src/de/settings.yaml index 08e65e5..ab1c453 100644 --- a/src/de/settings.yaml +++ b/src/de/settings.yaml @@ -125,7 +125,6 @@ overlays: - adafruit-joybonnet - vandenbosch-gpio-input -- fepi-audio-z - energenie-pi-mote - sixfab-cellular-shield - sixfab-gps-shield @@ -160,3 +159,4 @@ overlays: - waveshare-rgb-led-phat-4x8 - waveshare-rgb-led-hat-8x8 - monarco-hat +- fepi-audio diff --git a/src/de/translate/fepi-audio.md b/src/de/translate/fepi-audio.md new file mode 100644 index 0000000..d031575 --- /dev/null +++ b/src/de/translate/fepi-audio.md @@ -0,0 +1,66 @@ + +#Audio Z + +The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers. + +## Features ## + +* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use. +* Raspberry Pi 2, 3 PCB footprint. +* SGTL5000 low power stereo codec. +* 3.5 mm, 4 contact, jack for Headphone/MIC (black). +* RCA jacks for stereo Line In, and Line Out. +* 4 pin screw terminal for Speaker Out. +* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used! +* ADC > 90 dB SNR and -72 dB THD+N +* Line-Out > 100 dB SNR and -85 dB THD+N +* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm. +* Speaker Output > 1.4W per channel, into 8 ohms. +* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support. +* 2x20pin 2.54mm female header included! diff --git a/src/en/overlay/fepi-audio.md b/src/en/overlay/fepi-audio.md new file mode 100644 index 0000000..d031575 --- /dev/null +++ b/src/en/overlay/fepi-audio.md @@ -0,0 +1,66 @@ + +#Audio Z + +The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers. + +## Features ## + +* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use. +* Raspberry Pi 2, 3 PCB footprint. +* SGTL5000 low power stereo codec. +* 3.5 mm, 4 contact, jack for Headphone/MIC (black). +* RCA jacks for stereo Line In, and Line Out. +* 4 pin screw terminal for Speaker Out. +* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used! +* ADC > 90 dB SNR and -72 dB THD+N +* Line-Out > 100 dB SNR and -85 dB THD+N +* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm. +* Speaker Output > 1.4W per channel, into 8 ohms. +* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support. +* 2x20pin 2.54mm female header included! diff --git a/src/en/settings.yaml b/src/en/settings.yaml index 3c1d171..b2f2de2 100644 --- a/src/en/settings.yaml +++ b/src/en/settings.yaml @@ -73,7 +73,6 @@ overlays: - explorer-hat - explorer-hat-pro - explorer-phat -- fepi-audio-z - fourletter-phat - hyperpixel - icubex-pishield @@ -159,3 +158,4 @@ overlays: - waveshare-rgb-led-phat-4x8 - waveshare-rgb-led-hat-8x8 - monarco-hat +- fepi-audio diff --git a/src/es/settings.yaml b/src/es/settings.yaml index a79f8f9..8497f48 100644 --- a/src/es/settings.yaml +++ b/src/es/settings.yaml @@ -124,7 +124,6 @@ overlays: - motozero - adafruit-joybonnet - vandenbosch-gpio-input -- fepi-audio-z - energenie-pi-mote - sixfab-cellular-shield - sixfab-gps-shield @@ -159,3 +158,4 @@ overlays: - waveshare-rgb-led-phat-4x8 - waveshare-rgb-led-hat-8x8 - monarco-hat +- fepi-audio diff --git a/src/es/translate/fepi-audio.md b/src/es/translate/fepi-audio.md new file mode 100644 index 0000000..d031575 --- /dev/null +++ b/src/es/translate/fepi-audio.md @@ -0,0 +1,66 @@ + +#Audio Z + +The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers. + +## Features ## + +* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use. +* Raspberry Pi 2, 3 PCB footprint. +* SGTL5000 low power stereo codec. +* 3.5 mm, 4 contact, jack for Headphone/MIC (black). +* RCA jacks for stereo Line In, and Line Out. +* 4 pin screw terminal for Speaker Out. +* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used! +* ADC > 90 dB SNR and -72 dB THD+N +* Line-Out > 100 dB SNR and -85 dB THD+N +* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm. +* Speaker Output > 1.4W per channel, into 8 ohms. +* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support. +* 2x20pin 2.54mm female header included! diff --git a/src/fr/settings.yaml b/src/fr/settings.yaml index 7c9c412..74af768 100644 --- a/src/fr/settings.yaml +++ b/src/fr/settings.yaml @@ -125,7 +125,6 @@ overlays: - adafruit-joybonnet - vandenbosch-gpio-input -- fepi-audio-z - energenie-pi-mote - sixfab-cellular-shield - sixfab-gps-shield @@ -160,3 +159,4 @@ overlays: - waveshare-rgb-led-phat-4x8 - waveshare-rgb-led-hat-8x8 - monarco-hat +- fepi-audio diff --git a/src/fr/translate/fepi-audio.md b/src/fr/translate/fepi-audio.md new file mode 100644 index 0000000..d031575 --- /dev/null +++ b/src/fr/translate/fepi-audio.md @@ -0,0 +1,66 @@ + +#Audio Z + +The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers. + +## Features ## + +* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use. +* Raspberry Pi 2, 3 PCB footprint. +* SGTL5000 low power stereo codec. +* 3.5 mm, 4 contact, jack for Headphone/MIC (black). +* RCA jacks for stereo Line In, and Line Out. +* 4 pin screw terminal for Speaker Out. +* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used! +* ADC > 90 dB SNR and -72 dB THD+N +* Line-Out > 100 dB SNR and -85 dB THD+N +* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm. +* Speaker Output > 1.4W per channel, into 8 ohms. +* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support. +* 2x20pin 2.54mm female header included! diff --git a/src/it/settings.yaml b/src/it/settings.yaml index 4034ce3..9fb16de 100644 --- a/src/it/settings.yaml +++ b/src/it/settings.yaml @@ -125,7 +125,6 @@ overlays: - adafruit-joybonnet - vandenbosch-gpio-input -- fepi-audio-z - energenie-pi-mote - sixfab-cellular-shield - sixfab-gps-shield @@ -160,3 +159,4 @@ overlays: - waveshare-rgb-led-phat-4x8 - waveshare-rgb-led-hat-8x8 - monarco-hat +- fepi-audio diff --git a/src/it/translate/fepi-audio.md b/src/it/translate/fepi-audio.md new file mode 100644 index 0000000..d031575 --- /dev/null +++ b/src/it/translate/fepi-audio.md @@ -0,0 +1,66 @@ + +#Audio Z + +The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers. + +## Features ## + +* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use. +* Raspberry Pi 2, 3 PCB footprint. +* SGTL5000 low power stereo codec. +* 3.5 mm, 4 contact, jack for Headphone/MIC (black). +* RCA jacks for stereo Line In, and Line Out. +* 4 pin screw terminal for Speaker Out. +* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used! +* ADC > 90 dB SNR and -72 dB THD+N +* Line-Out > 100 dB SNR and -85 dB THD+N +* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm. +* Speaker Output > 1.4W per channel, into 8 ohms. +* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support. +* 2x20pin 2.54mm female header included! diff --git a/src/tr/settings.yaml b/src/tr/settings.yaml index e6e8221..46ad2d6 100644 --- a/src/tr/settings.yaml +++ b/src/tr/settings.yaml @@ -125,7 +125,6 @@ overlays: - adafruit-joybonnet - vandenbosch-gpio-input -- fepi-audio-z - energenie-pi-mote - sixfab-cellular-shield - sixfab-gps-shield @@ -160,3 +159,4 @@ overlays: - waveshare-rgb-led-phat-4x8 - waveshare-rgb-led-hat-8x8 - monarco-hat +- fepi-audio diff --git a/src/tr/translate/fepi-audio.md b/src/tr/translate/fepi-audio.md new file mode 100644 index 0000000..d031575 --- /dev/null +++ b/src/tr/translate/fepi-audio.md @@ -0,0 +1,66 @@ + +#Audio Z + +The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers. + +## Features ## + +* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use. +* Raspberry Pi 2, 3 PCB footprint. +* SGTL5000 low power stereo codec. +* 3.5 mm, 4 contact, jack for Headphone/MIC (black). +* RCA jacks for stereo Line In, and Line Out. +* 4 pin screw terminal for Speaker Out. +* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used! +* ADC > 90 dB SNR and -72 dB THD+N +* Line-Out > 100 dB SNR and -85 dB THD+N +* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm. +* Speaker Output > 1.4W per channel, into 8 ohms. +* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support. +* 2x20pin 2.54mm female header included!