From 24edb61ccfec32b31e58f44a2e5c17b548dbf32e Mon Sep 17 00:00:00 2001 From: RogueM Date: Sun, 12 Mar 2017 13:38:32 +0000 Subject: [PATCH] removed manufacturer from name field and added ADS1015 to Snake Eyes --- src/de/translate/adafruit-16x2-lcd.md | 4 ++-- src/de/translate/adafruit-animated-eyes-bonnet.md | 7 ++++++- src/de/translate/adafruit-arcade-bonnet.md | 4 ++-- src/de/translate/adafruit-cap-mpr121.md | 2 +- src/de/translate/adafruit-motor-hat.md | 4 ++-- src/de/translate/adafruit-pi-rtc.md | 4 ++-- src/de/translate/adafruit-rgb-matrix-hat.md | 4 ++-- src/de/translate/adafruit-tft-kippah.md | 4 ++-- src/en/overlay/adafruit-16x2-lcd.md | 4 ++-- src/en/overlay/adafruit-animated-eyes-bonnet.md | 7 ++++++- src/en/overlay/adafruit-arcade-bonnet.md | 4 ++-- src/en/overlay/adafruit-cap-mpr121.md | 2 +- src/en/overlay/adafruit-motor-hat.md | 4 ++-- src/en/overlay/adafruit-pi-rtc.md | 4 ++-- src/en/overlay/adafruit-rgb-matrix-hat.md | 4 ++-- src/en/overlay/adafruit-tft-kippah.md | 4 ++-- src/es/overlay/adafruit-animated-eyes-bonnet.md | 7 ++++++- src/es/translate/adafruit-16x2-lcd.md | 4 ++-- src/es/translate/adafruit-arcade-bonnet.md | 4 ++-- src/es/translate/adafruit-motor-hat.md | 4 ++-- src/es/translate/adafruit-pi-rtc.md | 4 ++-- src/es/translate/adafruit-rgb-matrix-hat.md | 4 ++-- src/es/translate/adafruit-tft-kippah.md | 4 ++-- src/fr/translate/adafruit-16x2-lcd.md | 4 ++-- src/fr/translate/adafruit-animated-eyes-bonnet.md | 7 ++++++- src/fr/translate/adafruit-arcade-bonnet.md | 4 ++-- src/fr/translate/adafruit-cap-mpr121.md | 2 +- src/fr/translate/adafruit-motor-hat.md | 4 ++-- src/fr/translate/adafruit-pi-rtc.md | 4 ++-- src/fr/translate/adafruit-rgb-matrix-hat.md | 4 ++-- src/fr/translate/adafruit-tft-kippah.md | 4 ++-- src/it/translate/adafruit-16x2-lcd.md | 4 ++-- src/it/translate/adafruit-animated-eyes-bonnet.md | 7 ++++++- src/it/translate/adafruit-arcade-bonnet.md | 4 ++-- src/it/translate/adafruit-cap-mpr121.md | 2 +- src/it/translate/adafruit-motor-hat.md | 4 ++-- src/it/translate/adafruit-pi-rtc.md | 4 ++-- src/it/translate/adafruit-rgb-matrix-hat.md | 4 ++-- src/it/translate/adafruit-tft-kippah.md | 4 ++-- src/tr/translate/adafruit-16x2-lcd.md | 4 ++-- src/tr/translate/adafruit-animated-eyes-bonnet.md | 7 ++++++- src/tr/translate/adafruit-arcade-bonnet.md | 4 ++-- src/tr/translate/adafruit-cap-mpr121.md | 2 +- src/tr/translate/adafruit-motor-hat.md | 4 ++-- src/tr/translate/adafruit-pi-rtc.md | 4 ++-- src/tr/translate/adafruit-rgb-matrix-hat.md | 4 ++-- src/tr/translate/adafruit-tft-kippah.md | 4 ++-- 47 files changed, 113 insertions(+), 83 deletions(-) diff --git a/src/de/translate/adafruit-16x2-lcd.md b/src/de/translate/adafruit-16x2-lcd.md index b23c899..607d9ce 100644 --- a/src/de/translate/adafruit-16x2-lcd.md +++ b/src/de/translate/adafruit-16x2-lcd.md @@ -1,6 +1,6 @@ -#Adafruit 16x2 Character LCD +#16x2 Character LCD This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins. diff --git a/src/de/translate/adafruit-animated-eyes-bonnet.md b/src/de/translate/adafruit-animated-eyes-bonnet.md index 8187433..5a3eec3 100644 --- a/src/de/translate/adafruit-animated-eyes-bonnet.md +++ b/src/de/translate/adafruit-animated-eyes-bonnet.md @@ -1,6 +1,6 @@ +#Snake Eyes Bonnet The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes! diff --git a/src/de/translate/adafruit-arcade-bonnet.md b/src/de/translate/adafruit-arcade-bonnet.md index 9e7c6e6..c4a0085 100644 --- a/src/de/translate/adafruit-arcade-bonnet.md +++ b/src/de/translate/adafruit-arcade-bonnet.md @@ -1,6 +1,6 @@ -#Adafruit Arcade Bonnet +#Arcade Bonnet This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here are the board's features: diff --git a/src/de/translate/adafruit-cap-mpr121.md b/src/de/translate/adafruit-cap-mpr121.md index c1cf7b3..b0d1f96 100644 --- a/src/de/translate/adafruit-cap-mpr121.md +++ b/src/de/translate/adafruit-cap-mpr121.md @@ -41,7 +41,7 @@ install: - 'python-dev' - 'python3-dev' --> -# Capacitive Touch HAT +#Capacitive Touch HAT This Raspberry Pi add-on board provides 12 capacitive touch inputs and all the logic to read them over a simple I2C communication bus. diff --git a/src/de/translate/adafruit-motor-hat.md b/src/de/translate/adafruit-motor-hat.md index febf79f..44c97ea 100644 --- a/src/de/translate/adafruit-motor-hat.md +++ b/src/de/translate/adafruit-motor-hat.md @@ -1,6 +1,6 @@ -#Adafruit DC & Stepper Motor HAT +#DC & Stepper Motor HAT Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. diff --git a/src/de/translate/adafruit-pi-rtc.md b/src/de/translate/adafruit-pi-rtc.md index 0c574cd..83a2d1e 100644 --- a/src/de/translate/adafruit-pi-rtc.md +++ b/src/de/translate/adafruit-pi-rtc.md @@ -1,6 +1,6 @@ -#Adafruit PiRTC +#PiRTC This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support. diff --git a/src/de/translate/adafruit-rgb-matrix-hat.md b/src/de/translate/adafruit-rgb-matrix-hat.md index 234e9da..ef50be9 100644 --- a/src/de/translate/adafruit-rgb-matrix-hat.md +++ b/src/de/translate/adafruit-rgb-matrix-hat.md @@ -1,6 +1,6 @@ -#Adafruit RGB Matrix HAT + RTC +#RGB Matrix HAT + RTC This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs. diff --git a/src/de/translate/adafruit-tft-kippah.md b/src/de/translate/adafruit-tft-kippah.md index 7287e1f..07d5d0a 100644 --- a/src/de/translate/adafruit-tft-kippah.md +++ b/src/de/translate/adafruit-tft-kippah.md @@ -1,6 +1,6 @@ -#Adafruit DPI TFT Kippah +#DPI TFT Kippah A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen. diff --git a/src/en/overlay/adafruit-16x2-lcd.md b/src/en/overlay/adafruit-16x2-lcd.md index b23c899..607d9ce 100644 --- a/src/en/overlay/adafruit-16x2-lcd.md +++ b/src/en/overlay/adafruit-16x2-lcd.md @@ -1,6 +1,6 @@ -#Adafruit 16x2 Character LCD +#16x2 Character LCD This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins. diff --git a/src/en/overlay/adafruit-animated-eyes-bonnet.md b/src/en/overlay/adafruit-animated-eyes-bonnet.md index 8187433..5a3eec3 100644 --- a/src/en/overlay/adafruit-animated-eyes-bonnet.md +++ b/src/en/overlay/adafruit-animated-eyes-bonnet.md @@ -1,6 +1,6 @@ +#Snake Eyes Bonnet The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes! diff --git a/src/en/overlay/adafruit-arcade-bonnet.md b/src/en/overlay/adafruit-arcade-bonnet.md index 9e7c6e6..c4a0085 100644 --- a/src/en/overlay/adafruit-arcade-bonnet.md +++ b/src/en/overlay/adafruit-arcade-bonnet.md @@ -1,6 +1,6 @@ -#Adafruit Arcade Bonnet +#Arcade Bonnet This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here are the board's features: diff --git a/src/en/overlay/adafruit-cap-mpr121.md b/src/en/overlay/adafruit-cap-mpr121.md index c1cf7b3..b0d1f96 100644 --- a/src/en/overlay/adafruit-cap-mpr121.md +++ b/src/en/overlay/adafruit-cap-mpr121.md @@ -41,7 +41,7 @@ install: - 'python-dev' - 'python3-dev' --> -# Capacitive Touch HAT +#Capacitive Touch HAT This Raspberry Pi add-on board provides 12 capacitive touch inputs and all the logic to read them over a simple I2C communication bus. diff --git a/src/en/overlay/adafruit-motor-hat.md b/src/en/overlay/adafruit-motor-hat.md index febf79f..44c97ea 100644 --- a/src/en/overlay/adafruit-motor-hat.md +++ b/src/en/overlay/adafruit-motor-hat.md @@ -1,6 +1,6 @@ -#Adafruit DC & Stepper Motor HAT +#DC & Stepper Motor HAT Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. diff --git a/src/en/overlay/adafruit-pi-rtc.md b/src/en/overlay/adafruit-pi-rtc.md index 0c574cd..83a2d1e 100644 --- a/src/en/overlay/adafruit-pi-rtc.md +++ b/src/en/overlay/adafruit-pi-rtc.md @@ -1,6 +1,6 @@ -#Adafruit PiRTC +#PiRTC This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support. diff --git a/src/en/overlay/adafruit-rgb-matrix-hat.md b/src/en/overlay/adafruit-rgb-matrix-hat.md index 234e9da..ef50be9 100644 --- a/src/en/overlay/adafruit-rgb-matrix-hat.md +++ b/src/en/overlay/adafruit-rgb-matrix-hat.md @@ -1,6 +1,6 @@ -#Adafruit RGB Matrix HAT + RTC +#RGB Matrix HAT + RTC This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs. diff --git a/src/en/overlay/adafruit-tft-kippah.md b/src/en/overlay/adafruit-tft-kippah.md index 7287e1f..07d5d0a 100644 --- a/src/en/overlay/adafruit-tft-kippah.md +++ b/src/en/overlay/adafruit-tft-kippah.md @@ -1,6 +1,6 @@ -#Adafruit DPI TFT Kippah +#DPI TFT Kippah A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen. diff --git a/src/es/overlay/adafruit-animated-eyes-bonnet.md b/src/es/overlay/adafruit-animated-eyes-bonnet.md index ce94c82..80063e2 100644 --- a/src/es/overlay/adafruit-animated-eyes-bonnet.md +++ b/src/es/overlay/adafruit-animated-eyes-bonnet.md @@ -1,6 +1,6 @@  +#Snake Eyes Bonnet Snake Eyes Bonnet (Gorro ojos de serpiente) es un accesorio para Raspberry Pi que permite controlar dos pantallas OLED o TFT LCD de 128x128 píxeles y cuenta con cuatro entradas analógicas para sensores. Es perfecto para hacer máscaras de cosplay, utilería, esculturas escalofriantes en halloween, animatrónicos, robots... ¡Cualquier cosa que necesite un par de ojos animados! diff --git a/src/es/translate/adafruit-16x2-lcd.md b/src/es/translate/adafruit-16x2-lcd.md index b23c899..607d9ce 100644 --- a/src/es/translate/adafruit-16x2-lcd.md +++ b/src/es/translate/adafruit-16x2-lcd.md @@ -1,6 +1,6 @@ -#Adafruit 16x2 Character LCD +#16x2 Character LCD This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins. diff --git a/src/es/translate/adafruit-arcade-bonnet.md b/src/es/translate/adafruit-arcade-bonnet.md index 9e7c6e6..c4a0085 100644 --- a/src/es/translate/adafruit-arcade-bonnet.md +++ b/src/es/translate/adafruit-arcade-bonnet.md @@ -1,6 +1,6 @@ -#Adafruit Arcade Bonnet +#Arcade Bonnet This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here are the board's features: diff --git a/src/es/translate/adafruit-motor-hat.md b/src/es/translate/adafruit-motor-hat.md index febf79f..44c97ea 100644 --- a/src/es/translate/adafruit-motor-hat.md +++ b/src/es/translate/adafruit-motor-hat.md @@ -1,6 +1,6 @@ -#Adafruit DC & Stepper Motor HAT +#DC & Stepper Motor HAT Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. diff --git a/src/es/translate/adafruit-pi-rtc.md b/src/es/translate/adafruit-pi-rtc.md index 0c574cd..83a2d1e 100644 --- a/src/es/translate/adafruit-pi-rtc.md +++ b/src/es/translate/adafruit-pi-rtc.md @@ -1,6 +1,6 @@ -#Adafruit PiRTC +#PiRTC This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support. diff --git a/src/es/translate/adafruit-rgb-matrix-hat.md b/src/es/translate/adafruit-rgb-matrix-hat.md index 234e9da..ef50be9 100644 --- a/src/es/translate/adafruit-rgb-matrix-hat.md +++ b/src/es/translate/adafruit-rgb-matrix-hat.md @@ -1,6 +1,6 @@ -#Adafruit RGB Matrix HAT + RTC +#RGB Matrix HAT + RTC This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs. diff --git a/src/es/translate/adafruit-tft-kippah.md b/src/es/translate/adafruit-tft-kippah.md index 7287e1f..07d5d0a 100644 --- a/src/es/translate/adafruit-tft-kippah.md +++ b/src/es/translate/adafruit-tft-kippah.md @@ -1,6 +1,6 @@ -#Adafruit DPI TFT Kippah +#DPI TFT Kippah A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen. diff --git a/src/fr/translate/adafruit-16x2-lcd.md b/src/fr/translate/adafruit-16x2-lcd.md index b23c899..607d9ce 100644 --- a/src/fr/translate/adafruit-16x2-lcd.md +++ b/src/fr/translate/adafruit-16x2-lcd.md @@ -1,6 +1,6 @@ -#Adafruit 16x2 Character LCD +#16x2 Character LCD This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins. diff --git a/src/fr/translate/adafruit-animated-eyes-bonnet.md b/src/fr/translate/adafruit-animated-eyes-bonnet.md index 8187433..5a3eec3 100644 --- a/src/fr/translate/adafruit-animated-eyes-bonnet.md +++ b/src/fr/translate/adafruit-animated-eyes-bonnet.md @@ -1,6 +1,6 @@ +#Snake Eyes Bonnet The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes! diff --git a/src/fr/translate/adafruit-arcade-bonnet.md b/src/fr/translate/adafruit-arcade-bonnet.md index 9e7c6e6..c4a0085 100644 --- a/src/fr/translate/adafruit-arcade-bonnet.md +++ b/src/fr/translate/adafruit-arcade-bonnet.md @@ -1,6 +1,6 @@ -#Adafruit Arcade Bonnet +#Arcade Bonnet This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here are the board's features: diff --git a/src/fr/translate/adafruit-cap-mpr121.md b/src/fr/translate/adafruit-cap-mpr121.md index c1cf7b3..b0d1f96 100644 --- a/src/fr/translate/adafruit-cap-mpr121.md +++ b/src/fr/translate/adafruit-cap-mpr121.md @@ -41,7 +41,7 @@ install: - 'python-dev' - 'python3-dev' --> -# Capacitive Touch HAT +#Capacitive Touch HAT This Raspberry Pi add-on board provides 12 capacitive touch inputs and all the logic to read them over a simple I2C communication bus. diff --git a/src/fr/translate/adafruit-motor-hat.md b/src/fr/translate/adafruit-motor-hat.md index febf79f..44c97ea 100644 --- a/src/fr/translate/adafruit-motor-hat.md +++ b/src/fr/translate/adafruit-motor-hat.md @@ -1,6 +1,6 @@ -#Adafruit DC & Stepper Motor HAT +#DC & Stepper Motor HAT Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. diff --git a/src/fr/translate/adafruit-pi-rtc.md b/src/fr/translate/adafruit-pi-rtc.md index 0c574cd..83a2d1e 100644 --- a/src/fr/translate/adafruit-pi-rtc.md +++ b/src/fr/translate/adafruit-pi-rtc.md @@ -1,6 +1,6 @@ -#Adafruit PiRTC +#PiRTC This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support. diff --git a/src/fr/translate/adafruit-rgb-matrix-hat.md b/src/fr/translate/adafruit-rgb-matrix-hat.md index 234e9da..ef50be9 100644 --- a/src/fr/translate/adafruit-rgb-matrix-hat.md +++ b/src/fr/translate/adafruit-rgb-matrix-hat.md @@ -1,6 +1,6 @@ -#Adafruit RGB Matrix HAT + RTC +#RGB Matrix HAT + RTC This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs. diff --git a/src/fr/translate/adafruit-tft-kippah.md b/src/fr/translate/adafruit-tft-kippah.md index 7287e1f..07d5d0a 100644 --- a/src/fr/translate/adafruit-tft-kippah.md +++ b/src/fr/translate/adafruit-tft-kippah.md @@ -1,6 +1,6 @@ -#Adafruit DPI TFT Kippah +#DPI TFT Kippah A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen. diff --git a/src/it/translate/adafruit-16x2-lcd.md b/src/it/translate/adafruit-16x2-lcd.md index b23c899..607d9ce 100644 --- a/src/it/translate/adafruit-16x2-lcd.md +++ b/src/it/translate/adafruit-16x2-lcd.md @@ -1,6 +1,6 @@ -#Adafruit 16x2 Character LCD +#16x2 Character LCD This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins. diff --git a/src/it/translate/adafruit-animated-eyes-bonnet.md b/src/it/translate/adafruit-animated-eyes-bonnet.md index 8187433..5a3eec3 100644 --- a/src/it/translate/adafruit-animated-eyes-bonnet.md +++ b/src/it/translate/adafruit-animated-eyes-bonnet.md @@ -1,6 +1,6 @@ +#Snake Eyes Bonnet The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes! diff --git a/src/it/translate/adafruit-arcade-bonnet.md b/src/it/translate/adafruit-arcade-bonnet.md index 9e7c6e6..c4a0085 100644 --- a/src/it/translate/adafruit-arcade-bonnet.md +++ b/src/it/translate/adafruit-arcade-bonnet.md @@ -1,6 +1,6 @@ -#Adafruit Arcade Bonnet +#Arcade Bonnet This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here are the board's features: diff --git a/src/it/translate/adafruit-cap-mpr121.md b/src/it/translate/adafruit-cap-mpr121.md index c1cf7b3..b0d1f96 100644 --- a/src/it/translate/adafruit-cap-mpr121.md +++ b/src/it/translate/adafruit-cap-mpr121.md @@ -41,7 +41,7 @@ install: - 'python-dev' - 'python3-dev' --> -# Capacitive Touch HAT +#Capacitive Touch HAT This Raspberry Pi add-on board provides 12 capacitive touch inputs and all the logic to read them over a simple I2C communication bus. diff --git a/src/it/translate/adafruit-motor-hat.md b/src/it/translate/adafruit-motor-hat.md index febf79f..44c97ea 100644 --- a/src/it/translate/adafruit-motor-hat.md +++ b/src/it/translate/adafruit-motor-hat.md @@ -1,6 +1,6 @@ -#Adafruit DC & Stepper Motor HAT +#DC & Stepper Motor HAT Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. diff --git a/src/it/translate/adafruit-pi-rtc.md b/src/it/translate/adafruit-pi-rtc.md index 0c574cd..83a2d1e 100644 --- a/src/it/translate/adafruit-pi-rtc.md +++ b/src/it/translate/adafruit-pi-rtc.md @@ -1,6 +1,6 @@ -#Adafruit PiRTC +#PiRTC This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support. diff --git a/src/it/translate/adafruit-rgb-matrix-hat.md b/src/it/translate/adafruit-rgb-matrix-hat.md index 234e9da..ef50be9 100644 --- a/src/it/translate/adafruit-rgb-matrix-hat.md +++ b/src/it/translate/adafruit-rgb-matrix-hat.md @@ -1,6 +1,6 @@ -#Adafruit RGB Matrix HAT + RTC +#RGB Matrix HAT + RTC This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs. diff --git a/src/it/translate/adafruit-tft-kippah.md b/src/it/translate/adafruit-tft-kippah.md index 7287e1f..07d5d0a 100644 --- a/src/it/translate/adafruit-tft-kippah.md +++ b/src/it/translate/adafruit-tft-kippah.md @@ -1,6 +1,6 @@ -#Adafruit DPI TFT Kippah +#DPI TFT Kippah A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen. diff --git a/src/tr/translate/adafruit-16x2-lcd.md b/src/tr/translate/adafruit-16x2-lcd.md index b23c899..607d9ce 100644 --- a/src/tr/translate/adafruit-16x2-lcd.md +++ b/src/tr/translate/adafruit-16x2-lcd.md @@ -1,6 +1,6 @@ -#Adafruit 16x2 Character LCD +#16x2 Character LCD This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins. diff --git a/src/tr/translate/adafruit-animated-eyes-bonnet.md b/src/tr/translate/adafruit-animated-eyes-bonnet.md index 8187433..5a3eec3 100644 --- a/src/tr/translate/adafruit-animated-eyes-bonnet.md +++ b/src/tr/translate/adafruit-animated-eyes-bonnet.md @@ -1,6 +1,6 @@ +#Snake Eyes Bonnet The Snake Eyes Bonnet is a Raspberry Pi accessory for driving two 128x128 pixel OLED or TFT LCD displays, and also provides four analog inputs for sensors. It's perfect for making cosplay masks, props, spooky sculptures for halloween, animatronics, robots...anything where you want to add a pair of animated eyes! diff --git a/src/tr/translate/adafruit-arcade-bonnet.md b/src/tr/translate/adafruit-arcade-bonnet.md index 9e7c6e6..c4a0085 100644 --- a/src/tr/translate/adafruit-arcade-bonnet.md +++ b/src/tr/translate/adafruit-arcade-bonnet.md @@ -1,6 +1,6 @@ -#Adafruit Arcade Bonnet +#Arcade Bonnet This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here are the board's features: diff --git a/src/tr/translate/adafruit-cap-mpr121.md b/src/tr/translate/adafruit-cap-mpr121.md index c1cf7b3..b0d1f96 100644 --- a/src/tr/translate/adafruit-cap-mpr121.md +++ b/src/tr/translate/adafruit-cap-mpr121.md @@ -41,7 +41,7 @@ install: - 'python-dev' - 'python3-dev' --> -# Capacitive Touch HAT +#Capacitive Touch HAT This Raspberry Pi add-on board provides 12 capacitive touch inputs and all the logic to read them over a simple I2C communication bus. diff --git a/src/tr/translate/adafruit-motor-hat.md b/src/tr/translate/adafruit-motor-hat.md index febf79f..44c97ea 100644 --- a/src/tr/translate/adafruit-motor-hat.md +++ b/src/tr/translate/adafruit-motor-hat.md @@ -1,6 +1,6 @@ -#Adafruit DC & Stepper Motor HAT +#DC & Stepper Motor HAT Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. diff --git a/src/tr/translate/adafruit-pi-rtc.md b/src/tr/translate/adafruit-pi-rtc.md index 0c574cd..83a2d1e 100644 --- a/src/tr/translate/adafruit-pi-rtc.md +++ b/src/tr/translate/adafruit-pi-rtc.md @@ -1,6 +1,6 @@ -#Adafruit PiRTC +#PiRTC This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support. diff --git a/src/tr/translate/adafruit-rgb-matrix-hat.md b/src/tr/translate/adafruit-rgb-matrix-hat.md index 234e9da..ef50be9 100644 --- a/src/tr/translate/adafruit-rgb-matrix-hat.md +++ b/src/tr/translate/adafruit-rgb-matrix-hat.md @@ -1,6 +1,6 @@ -#Adafruit RGB Matrix HAT + RTC +#RGB Matrix HAT + RTC This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs. diff --git a/src/tr/translate/adafruit-tft-kippah.md b/src/tr/translate/adafruit-tft-kippah.md index 7287e1f..07d5d0a 100644 --- a/src/tr/translate/adafruit-tft-kippah.md +++ b/src/tr/translate/adafruit-tft-kippah.md @@ -1,6 +1,6 @@ -#Adafruit DPI TFT Kippah +#DPI TFT Kippah A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.