villivateur
/
pinout.vvzero.com
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Published CamJam EduKit 3 board

This commit is contained in:
Phil Howard 2020-05-02 19:58:26 +01:00
parent 10429d0978
commit 2b764df48e
7 changed files with 185 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

0
draft/boards/camjam-edukit-3-motor-controller.png → resources/boards/camjam-edukit-3-motor-controller.png
View File

Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 81 KiB

After

Width:  |  Height:  |  Size: 81 KiB

0
draft/overlay/camjam-edukit-3-motor-controller.md → src/de/translate/camjam-edukit-3-motor-controller.md
View File

37
src/en/overlay/camjam-edukit-3-motor-controller.md Normal file
View File

@ -0,0 +1,37 @@
<!--
---
name: CamJam EduKit 3 motor controller board
class: board
type: motor
formfactor: Custom
manufacturer: PiHut
description: A motor controller board to control two motor channels and break out unused pins. Please note, pinouts for the original version and the new version are the same.
url: https://camjam.me/?page_id=1035
buy: https://thepihut.com/collections/camjam-edukit/products/camjam-edukit-3-robotics
github: https://github.com/CamJam-EduKit/EduKit3/
image: 'camjam-edukit-3-motor-controller.png'
pincount: 26
eeprom: no
pin:
'21':
name: MotorA_0
mode: output
'19':
name: MotorA_1
mode: output
'26':
name: MotorB_0
mode: output
'24':
name: MotorB_1
mode: output
-->
# CamJam EduKit 3 motor controller board
This motor controller board is part of CamJam EduKit 3 - Robotics but is also [available separately from The Pi Hut](https://thepihut.com/products/camjam-edukit-motor-controller). It provides two motor outputs for 6V motors using a DRV8833 H Bridge and breaks out most of the unused pins to a female header on top of the board.
Pins that are broken out to the header are as follows: 5v, 3v3, SDA and SCL (for I2C devices), 4, 17, 18, 22, 23, 24, 25, 27, and Ground.
The board expects 4 AA batteries to be used to power the board, although it will accept up to 10V if you have more powerful motors available. A flyback diode is provided to protect your board and Raspberry Pi if you should accidentally wire up the power source the wrong way around.
The motor controller board was designed by Rachel Rayns for The Pi Hut. Educational material was written by [Tim Richardson](https://twitter.com/Geeky_Tim) and tested by [Michael Horne](https://twitter.com/recantha) over at [CamJam](https://camjam.me/edukit).

37
src/es/translate/camjam-edukit-3-motor-controller.md Normal file
View File

@ -0,0 +1,37 @@
<!--
---
name: CamJam EduKit 3 motor controller board
class: board
type: motor
formfactor: Custom
manufacturer: PiHut
description: A motor controller board to control two motor channels and break out unused pins. Please note, pinouts for the original version and the new version are the same.
url: https://camjam.me/?page_id=1035
buy: https://thepihut.com/collections/camjam-edukit/products/camjam-edukit-3-robotics
github: https://github.com/CamJam-EduKit/EduKit3/
image: 'camjam-edukit-3-motor-controller.png'
pincount: 26
eeprom: no
pin:
'21':
name: MotorA_0
mode: output
'19':
name: MotorA_1
mode: output
'26':
name: MotorB_0
mode: output
'24':
name: MotorB_1
mode: output
-->
# CamJam EduKit 3 motor controller board
This motor controller board is part of CamJam EduKit 3 - Robotics but is also [available separately from The Pi Hut](https://thepihut.com/products/camjam-edukit-motor-controller). It provides two motor outputs for 6V motors using a DRV8833 H Bridge and breaks out most of the unused pins to a female header on top of the board.
Pins that are broken out to the header are as follows: 5v, 3v3, SDA and SCL (for I2C devices), 4, 17, 18, 22, 23, 24, 25, 27, and Ground.
The board expects 4 AA batteries to be used to power the board, although it will accept up to 10V if you have more powerful motors available. A flyback diode is provided to protect your board and Raspberry Pi if you should accidentally wire up the power source the wrong way around.
The motor controller board was designed by Rachel Rayns for The Pi Hut. Educational material was written by [Tim Richardson](https://twitter.com/Geeky_Tim) and tested by [Michael Horne](https://twitter.com/recantha) over at [CamJam](https://camjam.me/edukit).

37
src/fr/translate/camjam-edukit-3-motor-controller.md Normal file
View File

@ -0,0 +1,37 @@
<!--
---
name: CamJam EduKit 3 motor controller board
class: board
type: motor
formfactor: Custom
manufacturer: PiHut
description: A motor controller board to control two motor channels and break out unused pins. Please note, pinouts for the original version and the new version are the same.
url: https://camjam.me/?page_id=1035
buy: https://thepihut.com/collections/camjam-edukit/products/camjam-edukit-3-robotics
github: https://github.com/CamJam-EduKit/EduKit3/
image: 'camjam-edukit-3-motor-controller.png'
pincount: 26
eeprom: no
pin:
'21':
name: MotorA_0
mode: output
'19':
name: MotorA_1
mode: output
'26':
name: MotorB_0
mode: output
'24':
name: MotorB_1
mode: output
-->
# CamJam EduKit 3 motor controller board
This motor controller board is part of CamJam EduKit 3 - Robotics but is also [available separately from The Pi Hut](https://thepihut.com/products/camjam-edukit-motor-controller). It provides two motor outputs for 6V motors using a DRV8833 H Bridge and breaks out most of the unused pins to a female header on top of the board.
Pins that are broken out to the header are as follows: 5v, 3v3, SDA and SCL (for I2C devices), 4, 17, 18, 22, 23, 24, 25, 27, and Ground.
The board expects 4 AA batteries to be used to power the board, although it will accept up to 10V if you have more powerful motors available. A flyback diode is provided to protect your board and Raspberry Pi if you should accidentally wire up the power source the wrong way around.
The motor controller board was designed by Rachel Rayns for The Pi Hut. Educational material was written by [Tim Richardson](https://twitter.com/Geeky_Tim) and tested by [Michael Horne](https://twitter.com/recantha) over at [CamJam](https://camjam.me/edukit).

37
src/it/translate/camjam-edukit-3-motor-controller.md Normal file
View File

@ -0,0 +1,37 @@
<!--
---
name: CamJam EduKit 3 motor controller board
class: board
type: motor
formfactor: Custom
manufacturer: PiHut
description: A motor controller board to control two motor channels and break out unused pins. Please note, pinouts for the original version and the new version are the same.
url: https://camjam.me/?page_id=1035
buy: https://thepihut.com/collections/camjam-edukit/products/camjam-edukit-3-robotics
github: https://github.com/CamJam-EduKit/EduKit3/
image: 'camjam-edukit-3-motor-controller.png'
pincount: 26
eeprom: no
pin:
'21':
name: MotorA_0
mode: output
'19':
name: MotorA_1
mode: output
'26':
name: MotorB_0
mode: output
'24':
name: MotorB_1
mode: output
-->
# CamJam EduKit 3 motor controller board
This motor controller board is part of CamJam EduKit 3 - Robotics but is also [available separately from The Pi Hut](https://thepihut.com/products/camjam-edukit-motor-controller). It provides two motor outputs for 6V motors using a DRV8833 H Bridge and breaks out most of the unused pins to a female header on top of the board.
Pins that are broken out to the header are as follows: 5v, 3v3, SDA and SCL (for I2C devices), 4, 17, 18, 22, 23, 24, 25, 27, and Ground.
The board expects 4 AA batteries to be used to power the board, although it will accept up to 10V if you have more powerful motors available. A flyback diode is provided to protect your board and Raspberry Pi if you should accidentally wire up the power source the wrong way around.
The motor controller board was designed by Rachel Rayns for The Pi Hut. Educational material was written by [Tim Richardson](https://twitter.com/Geeky_Tim) and tested by [Michael Horne](https://twitter.com/recantha) over at [CamJam](https://camjam.me/edukit).

37
src/tr/translate/camjam-edukit-3-motor-controller.md Normal file
View File

@ -0,0 +1,37 @@
<!--
---
name: CamJam EduKit 3 motor controller board
class: board
type: motor
formfactor: Custom
manufacturer: PiHut
description: A motor controller board to control two motor channels and break out unused pins. Please note, pinouts for the original version and the new version are the same.
url: https://camjam.me/?page_id=1035
buy: https://thepihut.com/collections/camjam-edukit/products/camjam-edukit-3-robotics
github: https://github.com/CamJam-EduKit/EduKit3/
image: 'camjam-edukit-3-motor-controller.png'
pincount: 26
eeprom: no
pin:
'21':
name: MotorA_0
mode: output
'19':
name: MotorA_1
mode: output
'26':
name: MotorB_0
mode: output
'24':
name: MotorB_1
mode: output
-->
# CamJam EduKit 3 motor controller board
This motor controller board is part of CamJam EduKit 3 - Robotics but is also [available separately from The Pi Hut](https://thepihut.com/products/camjam-edukit-motor-controller). It provides two motor outputs for 6V motors using a DRV8833 H Bridge and breaks out most of the unused pins to a female header on top of the board.
Pins that are broken out to the header are as follows: 5v, 3v3, SDA and SCL (for I2C devices), 4, 17, 18, 22, 23, 24, 25, 27, and Ground.
The board expects 4 AA batteries to be used to power the board, although it will accept up to 10V if you have more powerful motors available. A flyback diode is provided to protect your board and Raspberry Pi if you should accidentally wire up the power source the wrong way around.
The motor controller board was designed by Rachel Rayns for The Pi Hut. Educational material was written by [Tim Richardson](https://twitter.com/Geeky_Tim) and tested by [Michael Horne](https://twitter.com/recantha) over at [CamJam](https://camjam.me/edukit).