1-wire link fixed + custom pin info added
This commit is contained in:
parent
88e4edd359
commit
30b965a792
@ -4,7 +4,7 @@ name: 1-WIRE
|
|||||||
class: interface
|
class: interface
|
||||||
type: pinout
|
type: pinout
|
||||||
description: Raspberry Pi One-Wire pins
|
description: Raspberry Pi One-Wire pins
|
||||||
url: https://www.raspberrypi.org/documentation/hardware/raspberrypi/dpi/
|
url: https://www.kernel.org/doc/Documentation/w1/w1.generic
|
||||||
pin:
|
pin:
|
||||||
'bcm4':
|
'bcm4':
|
||||||
name: Data
|
name: Data
|
||||||
@ -17,13 +17,21 @@ To enable the one-wire interface you need to add the following line to /boot/con
|
|||||||
dtoverlay=w1-gpio
|
dtoverlay=w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
Alternatively you can enable the one-wire interface on demand using:
|
or
|
||||||
|
|
||||||
|
```
|
||||||
|
dtoverlay=w1-gpio,gpiopin=x
|
||||||
|
```
|
||||||
|
|
||||||
|
if you would like to use a custom pin (default is BCM4, as illustrated in pinout herein).
|
||||||
|
|
||||||
|
Alternatively you can enable the one-wire interface on demand using raspi-config, or the following:
|
||||||
|
|
||||||
```
|
```
|
||||||
sudo modprobe w1-gpio
|
sudo modprobe w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) GPIO4, like so:
|
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||||
|
|
||||||
```
|
```
|
||||||
ls /sys/bus/w1/devices/
|
ls /sys/bus/w1/devices/
|
||||||
|
@ -4,7 +4,7 @@ name: 1-WIRE
|
|||||||
class: interface
|
class: interface
|
||||||
type: pinout
|
type: pinout
|
||||||
description: Raspberry Pi One-Wire pins
|
description: Raspberry Pi One-Wire pins
|
||||||
url: https://www.raspberrypi.org/documentation/hardware/raspberrypi/dpi/
|
url: https://www.kernel.org/doc/Documentation/w1/w1.generic
|
||||||
pin:
|
pin:
|
||||||
'bcm4':
|
'bcm4':
|
||||||
name: Data
|
name: Data
|
||||||
@ -17,13 +17,21 @@ To enable the one-wire interface you need to add the following line to /boot/con
|
|||||||
dtoverlay=w1-gpio
|
dtoverlay=w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
Alternatively you can enable the one-wire interface on demand using:
|
or
|
||||||
|
|
||||||
|
```
|
||||||
|
dtoverlay=w1-gpio,gpiopin=x
|
||||||
|
```
|
||||||
|
|
||||||
|
if you would like to use a custom pin (default is BCM4, as illustrated in pinout herein).
|
||||||
|
|
||||||
|
Alternatively you can enable the one-wire interface on demand using raspi-config, or the following:
|
||||||
|
|
||||||
```
|
```
|
||||||
sudo modprobe w1-gpio
|
sudo modprobe w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) GPIO4, like so:
|
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||||
|
|
||||||
```
|
```
|
||||||
ls /sys/bus/w1/devices/
|
ls /sys/bus/w1/devices/
|
||||||
|
@ -4,7 +4,7 @@ name: 1-WIRE
|
|||||||
class: interface
|
class: interface
|
||||||
type: pinout
|
type: pinout
|
||||||
description: Raspberry Pi One-Wire pins
|
description: Raspberry Pi One-Wire pins
|
||||||
url: https://www.raspberrypi.org/documentation/hardware/raspberrypi/dpi/
|
url: https://www.kernel.org/doc/Documentation/w1/w1.generic
|
||||||
pin:
|
pin:
|
||||||
'bcm4':
|
'bcm4':
|
||||||
name: Data
|
name: Data
|
||||||
@ -23,7 +23,7 @@ También puedes habilitar la interfaz sobre la marcha, cuando sea necesario:
|
|||||||
sudo modprobe w1-gpio
|
sudo modprobe w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
Tras realizar una de las dos acciones anteriores, puedes enumerar los dispositivos conectados al GPIO4 de tu Raspberry Pi (por defecto) con:
|
Tras realizar una de las dos acciones anteriores, puedes enumerar los dispositivos conectados al BCM4 de tu Raspberry Pi (por defecto) con:
|
||||||
|
|
||||||
```
|
```
|
||||||
ls /sys/bus/w1/devices/
|
ls /sys/bus/w1/devices/
|
||||||
|
@ -4,7 +4,7 @@ name: 1-WIRE
|
|||||||
class: interface
|
class: interface
|
||||||
type: pinout
|
type: pinout
|
||||||
description: Raspberry Pi One-Wire pins
|
description: Raspberry Pi One-Wire pins
|
||||||
url: https://www.raspberrypi.org/documentation/hardware/raspberrypi/dpi/
|
url: https://www.kernel.org/doc/Documentation/w1/w1.generic
|
||||||
pin:
|
pin:
|
||||||
'bcm4':
|
'bcm4':
|
||||||
name: Data
|
name: Data
|
||||||
@ -17,13 +17,21 @@ To enable the one-wire interface you need to add the following line to /boot/con
|
|||||||
dtoverlay=w1-gpio
|
dtoverlay=w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
Alternatively you can enable the one-wire interface on demand using:
|
or
|
||||||
|
|
||||||
|
```
|
||||||
|
dtoverlay=w1-gpio,gpiopin=x
|
||||||
|
```
|
||||||
|
|
||||||
|
if you would like to use a custom pin (default is BCM4, as illustrated in pinout herein).
|
||||||
|
|
||||||
|
Alternatively you can enable the one-wire interface on demand using raspi-config, or the following:
|
||||||
|
|
||||||
```
|
```
|
||||||
sudo modprobe w1-gpio
|
sudo modprobe w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) GPIO4, like so:
|
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||||
|
|
||||||
```
|
```
|
||||||
ls /sys/bus/w1/devices/
|
ls /sys/bus/w1/devices/
|
||||||
|
@ -4,7 +4,7 @@ name: 1-WIRE
|
|||||||
class: interface
|
class: interface
|
||||||
type: pinout
|
type: pinout
|
||||||
description: Raspberry Pi One-Wire pins
|
description: Raspberry Pi One-Wire pins
|
||||||
url: https://www.raspberrypi.org/documentation/hardware/raspberrypi/dpi/
|
url: https://www.kernel.org/doc/Documentation/w1/w1.generic
|
||||||
pin:
|
pin:
|
||||||
'bcm4':
|
'bcm4':
|
||||||
name: Data
|
name: Data
|
||||||
@ -17,13 +17,21 @@ To enable the one-wire interface you need to add the following line to /boot/con
|
|||||||
dtoverlay=w1-gpio
|
dtoverlay=w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
Alternatively you can enable the one-wire interface on demand using:
|
or
|
||||||
|
|
||||||
|
```
|
||||||
|
dtoverlay=w1-gpio,gpiopin=x
|
||||||
|
```
|
||||||
|
|
||||||
|
if you would like to use a custom pin (default is BCM4, as illustrated in pinout herein).
|
||||||
|
|
||||||
|
Alternatively you can enable the one-wire interface on demand using raspi-config, or the following:
|
||||||
|
|
||||||
```
|
```
|
||||||
sudo modprobe w1-gpio
|
sudo modprobe w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) GPIO4, like so:
|
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||||
|
|
||||||
```
|
```
|
||||||
ls /sys/bus/w1/devices/
|
ls /sys/bus/w1/devices/
|
||||||
|
@ -4,7 +4,7 @@ name: 1-WIRE
|
|||||||
class: interface
|
class: interface
|
||||||
type: pinout
|
type: pinout
|
||||||
description: Raspberry Pi One-Wire pins
|
description: Raspberry Pi One-Wire pins
|
||||||
url: https://www.raspberrypi.org/documentation/hardware/raspberrypi/dpi/
|
url: https://www.kernel.org/doc/Documentation/w1/w1.generic
|
||||||
pin:
|
pin:
|
||||||
'bcm4':
|
'bcm4':
|
||||||
name: Data
|
name: Data
|
||||||
@ -17,13 +17,21 @@ To enable the one-wire interface you need to add the following line to /boot/con
|
|||||||
dtoverlay=w1-gpio
|
dtoverlay=w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
Alternatively you can enable the one-wire interface on demand using:
|
or
|
||||||
|
|
||||||
|
```
|
||||||
|
dtoverlay=w1-gpio,gpiopin=x
|
||||||
|
```
|
||||||
|
|
||||||
|
if you would like to use a custom pin (default is BCM4, as illustrated in pinout herein).
|
||||||
|
|
||||||
|
Alternatively you can enable the one-wire interface on demand using raspi-config, or the following:
|
||||||
|
|
||||||
```
|
```
|
||||||
sudo modprobe w1-gpio
|
sudo modprobe w1-gpio
|
||||||
```
|
```
|
||||||
|
|
||||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) GPIO4, like so:
|
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||||
|
|
||||||
```
|
```
|
||||||
ls /sys/bus/w1/devices/
|
ls /sys/bus/w1/devices/
|
||||||
|
Loading…
Reference in New Issue
Block a user