diff --git a/Makefile b/Makefile
index 36a9666..aeb165d 100644
--- a/Makefile
+++ b/Makefile
@@ -8,7 +8,7 @@ all:
cp -r resources output/$(LANG)/
clean:
- rm -r output/$(LANG)/*
+ rm -rf output/$(LANG)/*
serve: all
./serve.py $(LANG)
diff --git a/generate-html.py b/generate-html.py
index 992cf8b..8549f56 100755
--- a/generate-html.py
+++ b/generate-html.py
@@ -1,13 +1,10 @@
#!/usr/bin/env python
-import json
import markdown
import unicodedata
import re
import os
-import time
import sys
import pinout
-import yaml
import markjaml
import urlmapper
@@ -300,7 +297,7 @@ def get_hreflang_urls(src):
for lang in alternate_urls:
if src in alternate_urls[lang]:
url = alternate_urls[lang][src]
- hreflang.append(''.format(
+ hreflang.append(''.format(
lang=lang,
url=url
))
diff --git a/generate-json.py b/generate-json.py
index 3f4e8a6..4929c68 100755
--- a/generate-json.py
+++ b/generate-json.py
@@ -3,11 +3,8 @@ import json
import markdown
import unicodedata
import re
-import os
-import time
import sys
import pinout
-import yaml
import markjaml
reload(sys)
@@ -121,4 +118,4 @@ def load_md(filename):
overlays = map(load_overlay,overlays)
-print(json.dumps(overlays))
\ No newline at end of file
+print(json.dumps(overlays))
diff --git a/pinout.py b/pinout.py
index 3e9d02e..5b9b11a 100644
--- a/pinout.py
+++ b/pinout.py
@@ -1,7 +1,6 @@
import json
import yaml
import time
-import markdown
DB_FILE = 'pi-pinout.yaml'
SETTINGS_FILE = 'settings.yaml'
diff --git a/serve.py b/serve.py
index 08b6a93..67b5367 100755
--- a/serve.py
+++ b/serve.py
@@ -1,5 +1,5 @@
#!/usr/bin/env python
-from flask import Flask, redirect, send_from_directory
+from flask import Flask, send_from_directory
import sys
app = Flask(__name__)
diff --git a/src/de-DE/overlay/display-o-tron-hat.md b/src/de-DE/overlay/display-o-tron-hat.md
index c875db2..110cce0 100644
--- a/src/de-DE/overlay/display-o-tron-hat.md
+++ b/src/de-DE/overlay/display-o-tron-hat.md
@@ -3,7 +3,7 @@
name: Display-o-Tron HAT
manufacturer: Pimoroni
url: https://github.com/pimoroni/dot3k
-description: A 3-line character LCD with a 6-zone RGB backlight and 6 touch buttons
+description: Ein 3-zeiliges LCD mit einer 6-Zonen RGB Hintergrundbeleuchtung und 6 Tasten
pincount: 40
pin:
3:
@@ -32,13 +32,13 @@ pin:
-->
#Display-o-Tron HAT
-Display-o-Tron HAT uses both SPI and I2c to drive the LCD display, backlight and touch.
-However both of these busses can be shared with other devices.
+Der Display-o-Tron HAT benutzt den SPI- und I2C-Bus um das LC-Display, die Hintergrundbeleuchtung und die Tasten zu steuern bzw. abzufragen.
+Beide Busse können aber weiterhin noch mit anderen Komponenten genutzt werden.
-You can use the one-line product installer to get Display-o-Tron HAT set up and ready to go, just:
+Mit diesem Einzeiler installierst Du den Display-o-Tron HAT:
```bash
curl get.pimoroni.com/dot3k | bash
```
-And follow the instructions!
+...den Rest findest Du in der Anleitung auf Github :-)
diff --git a/src/de-DE/overlay/display-o-tron.md b/src/de-DE/overlay/display-o-tron.md
index b0fbac9..c16f313 100644
--- a/src/de-DE/overlay/display-o-tron.md
+++ b/src/de-DE/overlay/display-o-tron.md
@@ -4,7 +4,7 @@ name: Display-o-Tron 3000
manufacturer: Pimoroni
github: https://github.com/pimoroni/dot3k
url: https://github.com/pimoroni/dot3k
-description: A 3-line character LCD with an RGB backlight and joystick
+description: Ein 3-zeiliges LCD mit RGB Hintergrundbeleuchtung und Joystick
install:
'devices':
- 'i2c'
@@ -24,25 +24,25 @@ pin:
5:
mode: i2c
7:
- name: Joystick Button
+ name: Joystick Taste
mode: input
active: low
11:
- name: Joystick Left
+ name: Joystick links
mode: input
active: low
13:
- name: Joystick Up
+ name: Joystick oben
mode: input
active: low
15:
- name: Joystick Right
+ name: Joystick rechts
mode: input
active: low
19:
mode: spi
21:
- name: Joystick Down
+ name: Joystick unten
mode: input
active: low
22:
@@ -54,10 +54,10 @@ pin:
-->
#Display-o-Tron 3000
-You can use the one-line product installer to get Display-o-Tron 3000 set up and ready to go, just:
+Mit diesem Einzeiler installierst Du das Display-o-Tron 3000:
```bash
curl get.pimoroni.com/dot3k | bash
```
-And follow the instructions!
+...den Rest findest Du in der Anleitung auf Github :-)
diff --git a/src/de-DE/overlay/dots.md b/src/de-DE/overlay/dots.md
index e577c39..6ccdf25 100644
--- a/src/de-DE/overlay/dots.md
+++ b/src/de-DE/overlay/dots.md
@@ -1,12 +1,12 @@
#Raspberry Pi Dots
-###Dots is a Dot to Dot HAT board for the Raspberry Pi that lets you join-the-dots with BARE Conductive Paint!
+###Dots ist eine verbinde die Punkte HAT Platine für den Raspberry Pi, auf dem Du Punkte mit leitender Farbe verbindest!
-Every Dot on the Dots board is a "floating" metal contact just waiting to be pulled down to ground with a dab of paint.
+Jeder Punkt auf der Dots-Platine ist ein offener Metallkontakt der darauf wartet mit der Farbe kontaktiert zu werden.
+
+
+Um einen Punkt auszulesen setze den dazugehörigen Anschluss als Eingang und checke, ob der Kontakt hergestellt ist:
-To read a Dot you should set its corresponding pin as an INPUT and make sure it's pulled up like so:
```python
import RPi.GPIO as GPIO
@@ -105,8 +107,8 @@ GPIO.setup(dot_pin, GPIO.IN, GPIO.PUD_UP)
state = GPIO.input(dot_pin)
```
-It's good practise to only turn on the PULLUP when you actually want to read the Dot, so a method like
-this is recommended for reading:
+Es ist gute Praxis den Eingang nur auf PULLUP zu schalten, wenn Du den Kontakt auch lesen möchtest.
+Somit ist folgender Code empfohlen:
```python
def is_dot_connected(dot_pin):
diff --git a/src/de-DE/overlay/explorer-hat-pro.md b/src/de-DE/overlay/explorer-hat-pro.md
index b2ac149..5be19e8 100644
--- a/src/de-DE/overlay/explorer-hat-pro.md
+++ b/src/de-DE/overlay/explorer-hat-pro.md
@@ -108,7 +108,7 @@ sudo apt-get install python-pip
sudo pip install explorer-hat
```
-Anschliessend die Libraries in Dein Python-Skript importieren und basteln:
+Anschliessend die Libraries in Dein Python-Skript importieren und anfangen zu basteln:
```bash
import explorerhat
diff --git a/src/de-DE/overlay/i2c.md b/src/de-DE/overlay/i2c.md
index 5e9e0ee..d5f5ff6 100644
--- a/src/de-DE/overlay/i2c.md
+++ b/src/de-DE/overlay/i2c.md
@@ -1,7 +1,7 @@
-#I2C - Inter Integrated Circuit
+#I2C - Inter Integrated Circuit
-The Raspberry Pi's I2C pins are an extremely useful way to talk to many different types of external peripheral; from the MCP23017 digital IO expander, to a connected ATmega.
+Der I2C-Bus des Raspberry Pi ist sehr praktisch um mit vielen unterschiedlichen Bausteinen
+zu kommunizieren - egal ob z.B. ein MCP23017 als digitale I/O-Erweiterung oder sogar ein ATmega.
-You can verify the address of connected I2C peripherals with a simple one-liner:
+Die Adresse einen angeschlossenen I2C-Bausteins kann mit einem einfachen Einzeiler überprüft werden:
```bash
sudo apt-get install i2c-tools
sudo i2cdetect -y 1
```
-You can access i2c from Python using the smbus library:
+Den I2C-Bus kann man von Python aus über die smbus-Library ansteuern:
```bash
sudo apt-get install python-smbus
```
-And then in Python:
+...und dann in Python:
```python
import smbus
diff --git a/src/de-DE/overlay/piano-hat.md b/src/de-DE/overlay/piano-hat.md
index 2e274a8..6892a0e 100644
--- a/src/de-DE/overlay/piano-hat.md
+++ b/src/de-DE/overlay/piano-hat.md
@@ -3,7 +3,7 @@
name: Piano HAT
manufacturer: Pimoroni
url: https://github.com/pimoroni/piano-hat
-description: A tiny Pi piano with 16 touch-sensitive buttons
+description: Ein kleines Pi Piano mit 16 berührungsempfindlichen Tasten
pincount: 40
i2c:
'0x28':
@@ -34,14 +34,14 @@ pin:
-->
#Piano HAT
-Piano HAT has 16 touch-sensitive buttons. 13 of these are a single Piano octave, the rest give you octave up/down and instrument select functionality.
+Piano HAT hat 16 berührungsempfindliche Tasten. 13 dieser Tasten bilden eine Piano-Oktave, die anderen lassen die die Oktave hoch oder runter schalten und Instrumente auswählen.
-It uses two Microchip CAP1188 chips with the i2c addresses 0x28 and 0x2b.
+Der HAT benutzt zwei Microchip CAP1188 ICs mit den I2C Adressen 0x28 und 0x2b.
-You can use the one-line product installer to get Piano HAT set up and ready to go, just:
+Mit folgendem Einzeiler installierst Du die nötige Software:
```bash
curl get.pimoroni.com/pianohat | bash
```
-And follow the instructions!
+Den Rest findest Du in der Anleitung!
diff --git a/src/de-DE/overlay/pibrella.md b/src/de-DE/overlay/pibrella.md
index 3e2abfd..ee27a1e 100644
--- a/src/de-DE/overlay/pibrella.md
+++ b/src/de-DE/overlay/pibrella.md
@@ -3,7 +3,7 @@
name: Pibrella
manufacturer: Pimoroni Vs Cyntech
url: https://github.com/pimoroni/pibrella
-description: An all-in-one light, sound, input and output add-on board.
+description: eine "Alles-in-Einem" Licht, Ton, Ein- und Ausgabe Erweiterungsplatine.
pincount: 26
pin:
'7':
@@ -61,16 +61,17 @@ pin:
-->
#Pibrella
-The all-in-one light, sound, input and output add-on board from Pimoroni vs Cyntech uses lots of IO on the Pi but leaves both Serial and I2C free leaving plenty of room for expansion if you get creative.
+Die "Alles-in-Einem" Licht, Ton, Ein- und Ausgabe Erweiterungsplatine von Pimoroni vs Cyntech
+benutzt jede Menge I/O Anschlüsse des Pi aber lässt die serielle Schnittstelle und den I2C-Bus noch frei und somit viel Raum für creative Erweiterungen!
-Pibrella is easy to use, first you should install the module using LXTerminal/Command Line:
+Pibrella is einfach zu benutzen - einfach das entsprechende Modul über die Kommandozeile installieren:
```bash
sudo apt-get install python-pip
sudo pip install pibrella
```
-Then import it into your Python script and start tinkering:
+... dann die Library in Dein Python-Skript importieren und anfangen zu basteln:
```bash
import pibrella
diff --git a/src/de-DE/overlay/piglow.md b/src/de-DE/overlay/piglow.md
index 3344b8c..5936ac3 100644
--- a/src/de-DE/overlay/piglow.md
+++ b/src/de-DE/overlay/piglow.md
@@ -5,7 +5,7 @@ manufacturer: Pimoroni
url: https://github.com/pimoroni/piglow
github: https://github.com/pimoroni/piglow
buy: http://shop.pimoroni.com/products/piglow
-description: Simply 18 LEDs in a spiral pattern controllable in Python.
+description: 18 einfache LEDs als Spirale angeordnet und über Python ansteuerbar.
pincount: 26
pin:
'1': {}
diff --git a/src/de-DE/overlay/skywriter-hat.md b/src/de-DE/overlay/skywriter-hat.md
index f6f3e7d..666371a 100644
--- a/src/de-DE/overlay/skywriter-hat.md
+++ b/src/de-DE/overlay/skywriter-hat.md
@@ -5,7 +5,7 @@ manufacturer: Pimoroni
url: https://github.com/pimoroni/skywriter-hat
github: https://github.com/pimoroni/skywriter-hat
buy: http://shop.pimoroni.com/products/skywriter-hat
-description: A 3D positional and gesture sensor.
+description: Ein 3D Positions- und Gesten-Sensor.
install:
'apt':
- 'python-smbus'
@@ -28,7 +28,7 @@ pin:
-->
#Skywriter HAT
-Skywriter HAT senses your finger's position above it in 3 dimensions, outputting an X, Y, Z axis
-which you can use in your Python scripts.
+Skywriter HAT spürt die Position Deines Fingers über ihm in drei Dimensionen und gibt die somit die X-, Y- und Z-Koordinaten, welche Du in Deinen Python-Skripten verarbeiten kannst.
+
+Er erkennt auch Gesten wie z.B. wischen und andere.
-It also recognises gestures, including swipes and more.
diff --git a/src/de-DE/overlay/unicorn-hat.md b/src/de-DE/overlay/unicorn-hat.md
index c3c4013..aee4e37 100644
--- a/src/de-DE/overlay/unicorn-hat.md
+++ b/src/de-DE/overlay/unicorn-hat.md
@@ -4,7 +4,7 @@ name: Unicorn HAT
manufacturer: Pimoroni
url: http://shop.pimoroni.com/products/unicorn-hat
buy: http://shop.pimoroni.com/products/unicorn-hat
-description: 64 blindingly bright RGB LEDs on a single HAT
+description: 64 blendend helle RGB LEDs auf einem HAT
github: https://github.com/pimoroni/unicornhat
install:
'apt':
@@ -26,19 +26,19 @@ pin:
-->
#Unicorn HAT
-64 blindingly bright LEDs packed into a HAT and driven with an ultra-fast, C library that you can talk to
-from Python make Unicorn HAT PiGlow's bigger, brighter brother.
+64 blendend helle LEDs auf einem HAT, die über eine super schnelle C-Library angesteuert werden.
+Die C-Library lässt sich auch über Python ansteuern. Der Unicorn HAT ist quasi der grössere und hellere Bruder der PiGlow.
-Note: Unicorn HAT uses some special PWM trickery, performed with the same hardware that lets you Pi produce sound
-through the audio jack ( analog audio ) so you can't use both at the same time!
+Hinweis: der Unicorn HAT trickst ein wenig mit dem PWM-Ausgang - der gleichen Hardware, mit der Dein Pi Sounds über den
+analogen Audio-Ausgang erzeugen kann. Somit kannst Du nicht beides gleichzeitig nutzen!
-Setup is easy, just:
+Die Einrichtung des HATs ist einfach:
```bash
curl get.pimoroni.com/unicornhat | bash
```
-Then import it into your Python script and start tinkering:
+Dann musst Du die Library nur noch in Dein Python-Skript importieren und kannst anfangen zu experimentieren:
```bash
import unicornhat
diff --git a/src/de-DE/pin/pin-14.md b/src/de-DE/pin/pin-14.md
deleted file mode 100644
index d0abe28..0000000
--- a/src/de-DE/pin/pin-14.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-14.md b/src/de-DE/pin/pin-14.md
new file mode 120000
index 0000000..d0abe28
--- /dev/null
+++ b/src/de-DE/pin/pin-14.md
@@ -0,0 +1 @@
+pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-17.md b/src/de-DE/pin/pin-17.md
new file mode 120000
index 0000000..5fc74dd
--- /dev/null
+++ b/src/de-DE/pin/pin-17.md
@@ -0,0 +1 @@
+./pin-1.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-20.md b/src/de-DE/pin/pin-20.md
deleted file mode 100644
index d0abe28..0000000
--- a/src/de-DE/pin/pin-20.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-20.md b/src/de-DE/pin/pin-20.md
new file mode 120000
index 0000000..d0abe28
--- /dev/null
+++ b/src/de-DE/pin/pin-20.md
@@ -0,0 +1 @@
+pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-25.md b/src/de-DE/pin/pin-25.md
deleted file mode 100644
index d0abe28..0000000
--- a/src/de-DE/pin/pin-25.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-25.md b/src/de-DE/pin/pin-25.md
new file mode 120000
index 0000000..d0abe28
--- /dev/null
+++ b/src/de-DE/pin/pin-25.md
@@ -0,0 +1 @@
+pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-27.md b/src/de-DE/pin/pin-27.md
index b5b304f..1fb25ee 100644
--- a/src/de-DE/pin/pin-27.md
+++ b/src/de-DE/pin/pin-27.md
@@ -1,4 +1,2 @@
-# HAT EEPROM Anschlüsse ID_SC und ID_SD
-
Diese Anschlüsse sind für die HAT genannten Erweiterungsplatinen des Pi. Über diese
wird das EEPROM der Erweiterung per I2C angesprochen.
diff --git a/src/de-DE/pin/pin-28.md b/src/de-DE/pin/pin-28.md
deleted file mode 100644
index 70eec8c..0000000
--- a/src/de-DE/pin/pin-28.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-27.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-28.md b/src/de-DE/pin/pin-28.md
new file mode 120000
index 0000000..70eec8c
--- /dev/null
+++ b/src/de-DE/pin/pin-28.md
@@ -0,0 +1 @@
+pin-27.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-30.md b/src/de-DE/pin/pin-30.md
deleted file mode 100644
index d0abe28..0000000
--- a/src/de-DE/pin/pin-30.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-30.md b/src/de-DE/pin/pin-30.md
new file mode 120000
index 0000000..d0abe28
--- /dev/null
+++ b/src/de-DE/pin/pin-30.md
@@ -0,0 +1 @@
+pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-34.md b/src/de-DE/pin/pin-34.md
deleted file mode 100644
index d0abe28..0000000
--- a/src/de-DE/pin/pin-34.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-34.md b/src/de-DE/pin/pin-34.md
new file mode 120000
index 0000000..d0abe28
--- /dev/null
+++ b/src/de-DE/pin/pin-34.md
@@ -0,0 +1 @@
+pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-39.md b/src/de-DE/pin/pin-39.md
deleted file mode 100644
index d0abe28..0000000
--- a/src/de-DE/pin/pin-39.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-39.md b/src/de-DE/pin/pin-39.md
new file mode 120000
index 0000000..d0abe28
--- /dev/null
+++ b/src/de-DE/pin/pin-39.md
@@ -0,0 +1 @@
+pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-4.md b/src/de-DE/pin/pin-4.md
deleted file mode 100644
index 253c8f3..0000000
--- a/src/de-DE/pin/pin-4.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-2.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-4.md b/src/de-DE/pin/pin-4.md
new file mode 120000
index 0000000..253c8f3
--- /dev/null
+++ b/src/de-DE/pin/pin-4.md
@@ -0,0 +1 @@
+pin-2.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-5.md b/src/de-DE/pin/pin-5.md
index 171ee27..a760297 100644
--- a/src/de-DE/pin/pin-5.md
+++ b/src/de-DE/pin/pin-5.md
@@ -1,12 +1 @@
SCL ist der Clock oder Tackt Anschluss des I2C-Bus des Pi. [mehr über I2C](/pinout/i2c).
-
-```python
-require 'wiringpi2'
-HIGH = 1
-LOW = 0
-OUTPUT = 1
-INPUT = 0
-io = WiringPi::GPIO.new
-io.pin_mode(9,OUTPUT)
-io.digital_write(9,HIGH)
-```
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-9.md b/src/de-DE/pin/pin-9.md
deleted file mode 100644
index d0abe28..0000000
--- a/src/de-DE/pin/pin-9.md
+++ /dev/null
@@ -1 +0,0 @@
-pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/pin/pin-9.md b/src/de-DE/pin/pin-9.md
new file mode 120000
index 0000000..d0abe28
--- /dev/null
+++ b/src/de-DE/pin/pin-9.md
@@ -0,0 +1 @@
+pin-6.md
\ No newline at end of file
diff --git a/src/de-DE/settings.yaml b/src/de-DE/settings.yaml
index 67038a4..3581d55 100644
--- a/src/de-DE/settings.yaml
+++ b/src/de-DE/settings.yaml
@@ -8,7 +8,7 @@ resource_url: /resources/
domain: de.pinout.xyz
url_suffix:
urls:
- GND: ground
+ GND: masse_ground
strings:
- made_by: '* Made by {manufacturer}'
- type_hat: '* HAT form-factor'
diff --git a/src/es-ES/pin/pin-27.md b/src/es-ES/pin/pin-27.md
index e2be4ac..873ea70 100644
--- a/src/es-ES/pin/pin-27.md
+++ b/src/es-ES/pin/pin-27.md
@@ -1,3 +1 @@
-# Pines ID_SC e ID_SD del HAT EEPROM
-
Estos pines están generalmente reservados para la comunicación i2c con un HAT EEPROM.
diff --git a/src/es-ES/pin/pin-5.md b/src/es-ES/pin/pin-5.md
index 69a07c3..89319f0 100644
--- a/src/es-ES/pin/pin-5.md
+++ b/src/es-ES/pin/pin-5.md
@@ -1,12 +1 @@
SCL es uno de los pines i2c en la Pi, [aprende más sobre i2c](/pinout/i2c).
-
-```python
-require 'wiringpi2'
-HIGH = 1
-LOW = 0
-OUTPUT = 1
-INPUT = 0
-io = WiringPi::GPIO.new
-io.pin_mode(9,OUTPUT)
-io.digital_write(9,HIGH)
-```
diff --git a/src/fr-FR/index.md b/src/fr-FR/index.md
index c8270b5..3c81f71 100644
--- a/src/fr-FR/index.md
+++ b/src/fr-FR/index.md
@@ -1,6 +1,6 @@
#Pinout!
-##Le guide complet des broches GPIO de la Raspberry Pi, modèles B+ et Raspberry Pi 2 inclus!
+###Le guide complet des broches GPIO de la Raspberry Pi, modèles B+ et Raspberry Pi 2 inclus!
Ce document n'est pas destiné à l'impression, c'est à la fois un outil de référence rapide et un guide complet des broches GPIO de la Raspberry Pi.
@@ -24,4 +24,4 @@ Veuillez notez que la séparation des 14 broches du B+ dans leur présentation P
L'auteur principal de ce guide est Phil Howard (@Gadgetoid). Les contributeurs sont renseignés dans les notes des commits du projet Github parent (https://github.com/Gadgetoid/Pinout2)!
-Traduction: @RogueHAL13
\ No newline at end of file
+Traduction: @RogueHAL13
diff --git a/src/it-IT/settings.yaml b/src/it-IT/settings.yaml
index d9720dc..27b7405 100644
--- a/src/it-IT/settings.yaml
+++ b/src/it-IT/settings.yaml
@@ -5,7 +5,7 @@ default_title: Assegnazione pin GPIO del Raspberry Pi - Pi 1, B+, Pi 2
title_suffix: " - Assegnazione pin GPIO del Raspberry Pi"
base_url: /pinout/
resource_url: /resources/
-domain: pinout.xyz
+domain: it.pinout.xyz
url_suffix:
urls:
GND: ground
diff --git a/src/it-IT/template/layout.html b/src/it-IT/template/layout.html
index 97a30e0..ff98b2d 100755
--- a/src/it-IT/template/layout.html
+++ b/src/it-IT/template/layout.html
@@ -17,7 +17,7 @@
m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,document,'script','//www.google-analytics.com/analytics.js','ga');
- ga('create', 'UA-69846516-1', 'auto');
+ ga('create', 'UA-69846516-6', 'auto');
ga('send', 'pageview');
diff --git a/urlmapper.py b/urlmapper.py
index f268891..27b7092 100755
--- a/urlmapper.py
+++ b/urlmapper.py
@@ -1,12 +1,8 @@
#!/usr/bin/env python
-import json
import unicodedata
import re
-import os
-import time
import sys
import pinout
-import yaml
import markjaml
import glob