Published letstrust tpm
This commit is contained in:
parent
f01f080226
commit
3482092dc6
@ -186,3 +186,4 @@ overlays:
|
||||
- sixfab-nbiot-shield
|
||||
- sixfab-xbee-shield-v2
|
||||
- piborg-tropi
|
||||
- letstrust-tpm
|
||||
|
67
src/de/translate/letstrust-tpm.md
Normal file
67
src/de/translate/letstrust-tpm.md
Normal file
@ -0,0 +1,67 @@
|
||||
<!--
|
||||
---
|
||||
name: LetsTrust-TPM
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: pi3g
|
||||
description: Infineon SLB9670 TPM2.0 daughter board for the Raspberry PI
|
||||
url: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
schematic: http://www.letstrust.de/uploads/letstrust-v2.0.schematic.pdf
|
||||
buy: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
image: 'letstrust-tpm.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'17':
|
||||
ground:
|
||||
'20':
|
||||
'25':
|
||||
pin:
|
||||
'18':
|
||||
name: Reset
|
||||
mode: output
|
||||
active: low
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
22:
|
||||
name: PIRQ
|
||||
mode: input
|
||||
active: low
|
||||
26:
|
||||
mode: spi
|
||||
-->
|
||||
#LetsTrust-TPM
|
||||
|
||||
LetsTrust-TPM is a TPM2.0 daughter board for the Raspberry Pi platform based on an Infineon SLB9670 chip.
|
||||
It is compatible with all Raspberry Pi models and probably the smallest available addon board on the market.
|
||||
The TPM can be used e.g. as a secure keystore or as an hwrng.
|
||||
|
||||
In order to use it your kernel must have the following options enabled:
|
||||
```kernelconfig
|
||||
CONFIG_HW_RANDOM_TPM=m
|
||||
CONFIG_TCG_TPM=m
|
||||
CONFIG_TCG_TIS_CORE=m
|
||||
CONFIG_TCG_TIS_SPI=m
|
||||
CONFIG_SECURITYFS=y
|
||||
```
|
||||
and a suitable device tree overlay:
|
||||
```dts
|
||||
slb9670: slb9670@0{
|
||||
compatible = "infineon,slb9670";
|
||||
reg = <1>; /* CE1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi-max-frequency = <32000000>;
|
||||
status = "okay";
|
||||
};
|
||||
```
|
||||
|
||||
Per default CE1 is used as chip select, CE0 can also be used by resoldering a 0-ohm resistor.
|
||||
|
||||
A full dts overlay is available <a href="https://www.letstrust.de/uploads/letstrust-tpm-overlay.dts">here</a>,
|
||||
or you can also find a precompiled image with TPM support and the complete build-instructions at <a href=https://www.letstrust.de>letstrust.de</a>.
|
@ -186,3 +186,4 @@ overlays:
|
||||
- sixfab-nbiot-shield
|
||||
- sixfab-xbee-shield-v2
|
||||
- piborg-tropi
|
||||
- letstrust-tpm
|
||||
|
@ -186,3 +186,4 @@ overlays:
|
||||
- sixfab-nbiot-shield
|
||||
- sixfab-xbee-shield-v2
|
||||
- piborg-tropi
|
||||
- letstrust-tpm
|
||||
|
67
src/es/translate/letstrust-tpm.md
Normal file
67
src/es/translate/letstrust-tpm.md
Normal file
@ -0,0 +1,67 @@
|
||||
<!--
|
||||
---
|
||||
name: LetsTrust-TPM
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: pi3g
|
||||
description: Infineon SLB9670 TPM2.0 daughter board for the Raspberry PI
|
||||
url: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
schematic: http://www.letstrust.de/uploads/letstrust-v2.0.schematic.pdf
|
||||
buy: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
image: 'letstrust-tpm.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'17':
|
||||
ground:
|
||||
'20':
|
||||
'25':
|
||||
pin:
|
||||
'18':
|
||||
name: Reset
|
||||
mode: output
|
||||
active: low
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
22:
|
||||
name: PIRQ
|
||||
mode: input
|
||||
active: low
|
||||
26:
|
||||
mode: spi
|
||||
-->
|
||||
#LetsTrust-TPM
|
||||
|
||||
LetsTrust-TPM is a TPM2.0 daughter board for the Raspberry Pi platform based on an Infineon SLB9670 chip.
|
||||
It is compatible with all Raspberry Pi models and probably the smallest available addon board on the market.
|
||||
The TPM can be used e.g. as a secure keystore or as an hwrng.
|
||||
|
||||
In order to use it your kernel must have the following options enabled:
|
||||
```kernelconfig
|
||||
CONFIG_HW_RANDOM_TPM=m
|
||||
CONFIG_TCG_TPM=m
|
||||
CONFIG_TCG_TIS_CORE=m
|
||||
CONFIG_TCG_TIS_SPI=m
|
||||
CONFIG_SECURITYFS=y
|
||||
```
|
||||
and a suitable device tree overlay:
|
||||
```dts
|
||||
slb9670: slb9670@0{
|
||||
compatible = "infineon,slb9670";
|
||||
reg = <1>; /* CE1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi-max-frequency = <32000000>;
|
||||
status = "okay";
|
||||
};
|
||||
```
|
||||
|
||||
Per default CE1 is used as chip select, CE0 can also be used by resoldering a 0-ohm resistor.
|
||||
|
||||
A full dts overlay is available <a href="https://www.letstrust.de/uploads/letstrust-tpm-overlay.dts">here</a>,
|
||||
or you can also find a precompiled image with TPM support and the complete build-instructions at <a href=https://www.letstrust.de>letstrust.de</a>.
|
@ -186,3 +186,4 @@ overlays:
|
||||
- sixfab-nbiot-shield
|
||||
- sixfab-xbee-shield-v2
|
||||
- piborg-tropi
|
||||
- letstrust-tpm
|
||||
|
67
src/fr/translate/letstrust-tpm.md
Normal file
67
src/fr/translate/letstrust-tpm.md
Normal file
@ -0,0 +1,67 @@
|
||||
<!--
|
||||
---
|
||||
name: LetsTrust-TPM
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: pi3g
|
||||
description: Infineon SLB9670 TPM2.0 daughter board for the Raspberry PI
|
||||
url: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
schematic: http://www.letstrust.de/uploads/letstrust-v2.0.schematic.pdf
|
||||
buy: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
image: 'letstrust-tpm.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'17':
|
||||
ground:
|
||||
'20':
|
||||
'25':
|
||||
pin:
|
||||
'18':
|
||||
name: Reset
|
||||
mode: output
|
||||
active: low
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
22:
|
||||
name: PIRQ
|
||||
mode: input
|
||||
active: low
|
||||
26:
|
||||
mode: spi
|
||||
-->
|
||||
#LetsTrust-TPM
|
||||
|
||||
LetsTrust-TPM is a TPM2.0 daughter board for the Raspberry Pi platform based on an Infineon SLB9670 chip.
|
||||
It is compatible with all Raspberry Pi models and probably the smallest available addon board on the market.
|
||||
The TPM can be used e.g. as a secure keystore or as an hwrng.
|
||||
|
||||
In order to use it your kernel must have the following options enabled:
|
||||
```kernelconfig
|
||||
CONFIG_HW_RANDOM_TPM=m
|
||||
CONFIG_TCG_TPM=m
|
||||
CONFIG_TCG_TIS_CORE=m
|
||||
CONFIG_TCG_TIS_SPI=m
|
||||
CONFIG_SECURITYFS=y
|
||||
```
|
||||
and a suitable device tree overlay:
|
||||
```dts
|
||||
slb9670: slb9670@0{
|
||||
compatible = "infineon,slb9670";
|
||||
reg = <1>; /* CE1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi-max-frequency = <32000000>;
|
||||
status = "okay";
|
||||
};
|
||||
```
|
||||
|
||||
Per default CE1 is used as chip select, CE0 can also be used by resoldering a 0-ohm resistor.
|
||||
|
||||
A full dts overlay is available <a href="https://www.letstrust.de/uploads/letstrust-tpm-overlay.dts">here</a>,
|
||||
or you can also find a precompiled image with TPM support and the complete build-instructions at <a href=https://www.letstrust.de>letstrust.de</a>.
|
@ -186,3 +186,4 @@ overlays:
|
||||
- sixfab-nbiot-shield
|
||||
- sixfab-xbee-shield-v2
|
||||
- piborg-tropi
|
||||
- letstrust-tpm
|
||||
|
67
src/it/translate/letstrust-tpm.md
Normal file
67
src/it/translate/letstrust-tpm.md
Normal file
@ -0,0 +1,67 @@
|
||||
<!--
|
||||
---
|
||||
name: LetsTrust-TPM
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: pi3g
|
||||
description: Infineon SLB9670 TPM2.0 daughter board for the Raspberry PI
|
||||
url: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
schematic: http://www.letstrust.de/uploads/letstrust-v2.0.schematic.pdf
|
||||
buy: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
image: 'letstrust-tpm.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'17':
|
||||
ground:
|
||||
'20':
|
||||
'25':
|
||||
pin:
|
||||
'18':
|
||||
name: Reset
|
||||
mode: output
|
||||
active: low
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
22:
|
||||
name: PIRQ
|
||||
mode: input
|
||||
active: low
|
||||
26:
|
||||
mode: spi
|
||||
-->
|
||||
#LetsTrust-TPM
|
||||
|
||||
LetsTrust-TPM is a TPM2.0 daughter board for the Raspberry Pi platform based on an Infineon SLB9670 chip.
|
||||
It is compatible with all Raspberry Pi models and probably the smallest available addon board on the market.
|
||||
The TPM can be used e.g. as a secure keystore or as an hwrng.
|
||||
|
||||
In order to use it your kernel must have the following options enabled:
|
||||
```kernelconfig
|
||||
CONFIG_HW_RANDOM_TPM=m
|
||||
CONFIG_TCG_TPM=m
|
||||
CONFIG_TCG_TIS_CORE=m
|
||||
CONFIG_TCG_TIS_SPI=m
|
||||
CONFIG_SECURITYFS=y
|
||||
```
|
||||
and a suitable device tree overlay:
|
||||
```dts
|
||||
slb9670: slb9670@0{
|
||||
compatible = "infineon,slb9670";
|
||||
reg = <1>; /* CE1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi-max-frequency = <32000000>;
|
||||
status = "okay";
|
||||
};
|
||||
```
|
||||
|
||||
Per default CE1 is used as chip select, CE0 can also be used by resoldering a 0-ohm resistor.
|
||||
|
||||
A full dts overlay is available <a href="https://www.letstrust.de/uploads/letstrust-tpm-overlay.dts">here</a>,
|
||||
or you can also find a precompiled image with TPM support and the complete build-instructions at <a href=https://www.letstrust.de>letstrust.de</a>.
|
@ -186,3 +186,4 @@ overlays:
|
||||
- sixfab-nbiot-shield
|
||||
- sixfab-xbee-shield-v2
|
||||
- piborg-tropi
|
||||
- letstrust-tpm
|
||||
|
67
src/tr/translate/letstrust-tpm.md
Normal file
67
src/tr/translate/letstrust-tpm.md
Normal file
@ -0,0 +1,67 @@
|
||||
<!--
|
||||
---
|
||||
name: LetsTrust-TPM
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: pi3g
|
||||
description: Infineon SLB9670 TPM2.0 daughter board for the Raspberry PI
|
||||
url: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
schematic: http://www.letstrust.de/uploads/letstrust-v2.0.schematic.pdf
|
||||
buy: https://buyzero.de/products/letstrust-hardware-tpm-trusted-platform-module
|
||||
image: 'letstrust-tpm.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'17':
|
||||
ground:
|
||||
'20':
|
||||
'25':
|
||||
pin:
|
||||
'18':
|
||||
name: Reset
|
||||
mode: output
|
||||
active: low
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
22:
|
||||
name: PIRQ
|
||||
mode: input
|
||||
active: low
|
||||
26:
|
||||
mode: spi
|
||||
-->
|
||||
#LetsTrust-TPM
|
||||
|
||||
LetsTrust-TPM is a TPM2.0 daughter board for the Raspberry Pi platform based on an Infineon SLB9670 chip.
|
||||
It is compatible with all Raspberry Pi models and probably the smallest available addon board on the market.
|
||||
The TPM can be used e.g. as a secure keystore or as an hwrng.
|
||||
|
||||
In order to use it your kernel must have the following options enabled:
|
||||
```kernelconfig
|
||||
CONFIG_HW_RANDOM_TPM=m
|
||||
CONFIG_TCG_TPM=m
|
||||
CONFIG_TCG_TIS_CORE=m
|
||||
CONFIG_TCG_TIS_SPI=m
|
||||
CONFIG_SECURITYFS=y
|
||||
```
|
||||
and a suitable device tree overlay:
|
||||
```dts
|
||||
slb9670: slb9670@0{
|
||||
compatible = "infineon,slb9670";
|
||||
reg = <1>; /* CE1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi-max-frequency = <32000000>;
|
||||
status = "okay";
|
||||
};
|
||||
```
|
||||
|
||||
Per default CE1 is used as chip select, CE0 can also be used by resoldering a 0-ohm resistor.
|
||||
|
||||
A full dts overlay is available <a href="https://www.letstrust.de/uploads/letstrust-tpm-overlay.dts">here</a>,
|
||||
or you can also find a precompiled image with TPM support and the complete build-instructions at <a href=https://www.letstrust.de>letstrust.de</a>.
|
Loading…
Reference in New Issue
Block a user