diff --git a/draft/overlay/JustBoom-Amp-HAT.md b/draft/overlay/JustBoom-Amp-HAT.md
index 4633f93..feb6df0 100644
--- a/draft/overlay/JustBoom-Amp-HAT.md
+++ b/draft/overlay/JustBoom-Amp-HAT.md
@@ -1,64 +1,64 @@
-<!--
----
-name: JustBoom Amp HAT
-class: board
-type: audio
-formfactor: HAT
-manufacturer: JustBoom
-description: The JustBoom Amp HAT is a high quality audio amplifier designed specifically for the Raspberry Pi.
-url: https://www.justboom.co/product/justboom-amp-hat/
-github:
-schematic:
-buy: https://www.pi-supply.com/product/justboom-amp-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=AMP_HAT_Product_Link
-image: 'justboom-amp-hat.png'
-pincount: 40
-eeprom: yes
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    mode: i2c
-  '5':
-    mode: i2c
-  '12':
-    name: BCKL (Bit Clock)
-    mode: i2s
-  '15':
-    name: Soft Mute
-  '22':
-    name: IR Receiver
-  '23':
-    name: Rotary Encoder
-  '24':
-    name: Rotary Encoder
-  '27':
-    mode: i2c
-  '28':
-    mode: i2c
-  '35':
-    name: LRCK (Left/Right Clock)
-    mode: i2s
-  '40':
-    name: DOUT
-    mode: i2s
--->
-#JustBoom Amp HAT
-* Full high quality audio – 192kHz / 32bit
-* 2 x 55 Watt peak output at 8 ohms (2 x 30 Watt RMS)
-* Includes both a DAC and power amplifier
-* Back-powers the Raspberry Pi at 2.5A so only one power supply required
-* Hardware and software volume control from your Raspberry Pi
-* Onboard gain control using jumper J5
-* Mute/enable with GPIO22 (override by using jumper J4)
-* Optional IR receiver via GPIO25
-* Unused GPIO pins still accessible via unpopulated extension header
+<!--
+---
+name: JustBoom Amp HAT
+class: board
+type: audio
+formfactor: HAT
+manufacturer: JustBoom
+description: The JustBoom Amp HAT is a high quality audio amplifier designed specifically for the Raspberry Pi.
+url: https://www.justboom.co/product/justboom-amp-hat/
+github:
+schematic:
+buy: https://www.pi-supply.com/product/justboom-amp-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=AMP_HAT_Product_Link
+image: 'justboom-amp-hat.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '12':
+    name: BCKL (Bit Clock)
+    mode: i2s
+  '15':
+    name: Soft Mute
+  '22':
+    name: IR Receiver
+  '23':
+    name: Rotary Encoder
+  '24':
+    name: Rotary Encoder
+  '27':
+    mode: i2c
+  '28':
+    mode: i2c
+  '35':
+    name: LRCK (Left/Right Clock)
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+-->
+#JustBoom Amp HAT
+* Full high quality audio – 192kHz / 32bit
+* 2 x 55 Watt peak output at 8 ohms (2 x 30 Watt RMS)
+* Includes both a DAC and power amplifier
+* Back-powers the Raspberry Pi at 2.5A so only one power supply required
+* Hardware and software volume control from your Raspberry Pi
+* Onboard gain control using jumper J5
+* Mute/enable with GPIO22 (override by using jumper J4)
+* Optional IR receiver via GPIO25
+* Unused GPIO pins still accessible via unpopulated extension header
diff --git a/draft/overlay/JustBoom-Amp-pHAT.md b/draft/overlay/JustBoom-Amp-pHAT.md
index 65d5a35..aabecfb 100644
--- a/draft/overlay/JustBoom-Amp-pHAT.md
+++ b/draft/overlay/JustBoom-Amp-pHAT.md
@@ -1,61 +1,61 @@
-<!--
----
-name: JustBoom Amp HAT
-class: board
-type: audio
-formfactor: HAT
-manufacturer: JustBoom
-description: The JustBoom Amp HAT is a high quality audio amplifier designed specifically for the Raspberry Pi.
-url: https://www.justboom.co/product/justboom-amp-hat/
-github:
-schematic:
-buy: https://www.pi-supply.com/product/justboom-amp-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=AMP_HAT_Product_Link
-image: 'justboom-amp-hat.png'
-pincount: 40
-eeprom: yes
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    mode: i2c
-  '5':
-    mode: i2c
-  '12':
-    name: BCKL (Bit Clock)
-    mode: i2s
-  '15':
-    name: Soft Mute
-  '22':
-    name: IR Receiver
-  '23':
-    name: Rotary Encoder
-  '24':
-    name: Rotary Encoder
-  '27':
-    mode: i2c
-  '28':
-    mode: i2c
-  '35':
-    name: LRCK (Left/Right Clock)
-    mode: i2s
-  '40':
-    name: DOUT
-    mode: i2s
--->
-#JustBoom Amp HAT
-* Full high quality audio – 192kHz / 32bit
-* 2 x 40 Watt peak output at 4 ohms (2 x 20 Watt RMS)
-* Includes both a DAC and power amplifier
-* Back-powers the Raspberry Pi so only one power supply required
-* Hardware and software volume control from your Raspberry Pi
-* Optional IR receiver via GPIO25
+<!--
+---
+name: JustBoom Amp pHAT
+class: board
+type: audio
+formfactor: pHAT
+manufacturer: JustBoom
+description: The JustBoom Amp pHAT is a high quality audio amplifier designed specifically for the Raspberry Pi.
+url: https://www.justboom.co/product/justboom-amp-hat/
+github:
+schematic:
+buy: https://www.pi-supply.com/product/justboom-amp-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=AMP_HAT_Product_Link
+image: 'justboom-amp-phat.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '12':
+    name: BCKL (Bit Clock)
+    mode: i2s
+  '15':
+    name: Soft Mute
+  '22':
+    name: IR Receiver
+  '23':
+    name: Rotary Encoder
+  '24':
+    name: Rotary Encoder
+  '27':
+    mode: i2c
+  '28':
+    mode: i2c
+  '35':
+    name: LRCK (Left/Right Clock)
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+-->
+#JustBoom Amp pHAT
+* Full high quality audio – 192kHz / 32bit
+* 2 x 40 Watt peak output at 4 ohms (2 x 20 Watt RMS)
+* Includes both a DAC and power amplifier
+* Back-powers the Raspberry Pi so only one power supply required
+* Hardware and software volume control from your Raspberry Pi
+* Optional IR receiver via GPIO25
diff --git a/draft/overlay/JustBoom-DAC-HAT.md b/draft/overlay/JustBoom-DAC-HAT.md
index 61cec11..4523498 100644
--- a/draft/overlay/JustBoom-DAC-HAT.md
+++ b/draft/overlay/JustBoom-DAC-HAT.md
@@ -1,61 +1,61 @@
-<!--
----
-name: JustBoom DAC HAT
-class: board
-type: audio
-formfactor: HAT
-manufacturer: JustBoom
-description: The JustBoom DAC HAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi.
-url: https://www.justboom.co/product/justboom-dac-hat/
-github:
-schematic:
-buy: https://www.pi-supply.com/product/justboom-dac-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=DAC_HAT_Product_Link
-image: 'justboom-dac-hat.png'
-pincount: 40
-eeprom: yes
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    mode: i2c
-  '5':
-    mode: i2c
-  '12':
-    name: BCKL (Bit Clock)
-    mode: i2s
-  '22':
-    name: IR Receiver
-  '23':
-    name: Rotary Encoder
-  '24':
-    name: Rotary Encoder
-  '27':
-    mode: i2c
-  '28':
-    mode: i2c
-  '35':
-    name: LRCK (Left/Right Clock)
-    mode: i2s
-  '40':
-    name: DOUT
-    mode: i2s
--->
-#JustBoom DAC HAT
-* Full high quality audio – 384kHz / 32bit
-* Includes both a DAC and headphone amplifier
-* Line-level RCA and headphone amplified 3.5mm jack outputs
-* Hardware and software volume control from your Raspberry Pi
-* Powered by the Raspberry Pi GPIO header
-* Optional IR receiver via GPIO25
-* Compatible with the JustBoom Amp which can easily stack on top of the DAC HAT
-* All Raspberry Pi GPIO pins still accessible via 40pin unpopulated
+<!--
+---
+name: JustBoom DAC HAT
+class: board
+type: audio
+formfactor: HAT
+manufacturer: JustBoom
+description: The JustBoom DAC HAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi.
+url: https://www.justboom.co/product/justboom-dac-hat/
+github:
+schematic:
+buy: https://www.pi-supply.com/product/justboom-dac-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=DAC_HAT_Product_Link
+image: 'justboom-dac-hat.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '12':
+    name: BCKL (Bit Clock)
+    mode: i2s
+  '22':
+    name: IR Receiver
+  '23':
+    name: Rotary Encoder
+  '24':
+    name: Rotary Encoder
+  '27':
+    mode: i2c
+  '28':
+    mode: i2c
+  '35':
+    name: LRCK (Left/Right Clock)
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+-->
+#JustBoom DAC HAT
+* Full high quality audio – 384kHz / 32bit
+* Includes both a DAC and headphone amplifier
+* Line-level RCA and headphone amplified 3.5mm jack outputs
+* Hardware and software volume control from your Raspberry Pi
+* Powered by the Raspberry Pi GPIO header
+* Optional IR receiver via GPIO25
+* Compatible with the JustBoom Amp which can easily stack on top of the DAC HAT
+* All Raspberry Pi GPIO pins still accessible via 40pin unpopulated
diff --git a/draft/overlay/JustBoom-DAC-pHAT.md b/draft/overlay/JustBoom-DAC-pHAT.md
index 452560d..8c37518 100644
--- a/draft/overlay/JustBoom-DAC-pHAT.md
+++ b/draft/overlay/JustBoom-DAC-pHAT.md
@@ -1,60 +1,60 @@
-<!--
----
-name: JustBoom DAC HAT
-class: board
-type: audio
-formfactor: HAT
-manufacturer: JustBoom
-description: The JustBoom DAC HAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi.
-url: https://www.justboom.co/product/justboom-dac-hat/
-github:
-schematic:
-buy: https://www.pi-supply.com/product/justboom-dac-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=DAC_HAT_Product_Link
-image: 'justboom-dac-hat.png'
-pincount: 40
-eeprom: yes
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    mode: i2c
-  '5':
-    mode: i2c
-  '12':
-    name: BCKL (Bit Clock)
-    mode: i2s
-  '22':
-    name: IR Receiver
-  '23':
-    name: Rotary Encoder
-  '24':
-    name: Rotary Encoder
-  '27':
-    mode: i2c
-  '28':
-    mode: i2c
-  '35':
-    name: LRCK (Left/Right Clock)
-    mode: i2s
-  '40':
-    name: DOUT
-    mode: i2s
--->
-#JustBoom DAC HAT
-* Full high quality audio – 384kHz / 32bit
-* Includes both a DAC and headphone amplifier
-* Line-level RCA (optional) and headphone amplified 3.5mm jack outputs
-* Hardware and software volume control from your Raspberry Pi
-* Powered by the Raspberry Pi GPIO header
-* Optional IR receiver via GPIO25
-* Unused GPIO pins still accessible via unpopulated extension header
+<!--
+---
+name: JustBoom DAC pHAT
+class: board
+type: audio
+formfactor: pHAT
+manufacturer: JustBoom
+description: The JustBoom DAC pHAT is a plug and play, high resolution, digital-to-analog converter for the Raspberry Pi.
+url: https://www.justboom.co/product/justboom-dac-hat/
+github:
+schematic:
+buy: https://www.pi-supply.com/product/justboom-dac-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=DAC_HAT_Product_Link
+image: 'justboom-dac-phat.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '12':
+    name: BCKL (Bit Clock)
+    mode: i2s
+  '22':
+    name: IR Receiver
+  '23':
+    name: Rotary Encoder
+  '24':
+    name: Rotary Encoder
+  '27':
+    mode: i2c
+  '28':
+    mode: i2c
+  '35':
+    name: LRCK (Left/Right Clock)
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+-->
+#JustBoom DAC pHAT
+* Full high quality audio – 384kHz / 32bit
+* Includes both a DAC and headphone amplifier
+* Line-level RCA (optional) and headphone amplified 3.5mm jack outputs
+* Hardware and software volume control from your Raspberry Pi
+* Powered by the Raspberry Pi GPIO header
+* Optional IR receiver via GPIO25
+* Unused GPIO pins still accessible via unpopulated extension header
diff --git a/draft/overlay/JustBoom-Digi-HAT.md b/draft/overlay/JustBoom-Digi-HAT.md
index 9c4a39a..2639879 100644
--- a/draft/overlay/JustBoom-Digi-HAT.md
+++ b/draft/overlay/JustBoom-Digi-HAT.md
@@ -1,61 +1,61 @@
-<!--
----
-name: JustBoom Digi HAT
-class: board
-type: audio
-formfactor: HAT
-manufacturer: JustBoom
-description: The JustBoom Digi HAT is a high resolution digital audio output add on board for the Raspberry Pi.
-url: https://www.justboom.co/product/justboom-digi-hat/
-github:
-schematic:
-buy: https://www.pi-supply.com/product/justboom-digi-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=Digi_HAT_Product_Link
-image: 'justboom-digi-hat.png'
-pincount: 40
-eeprom: yes
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    mode: i2c
-  '5':
-    mode: i2c
-  '12':
-    name: BCKL (Bit Clock)
-    mode: i2s
-  '22':
-    name: IR Receiver
-  '23':
-    name: Rotary Encoder
-  '24':
-    name: Rotary Encoder
-  '27':
-    mode: i2c
-  '28':
-    mode: i2c
-  '35':
-    name: LRCK (Left/Right Clock)
-    mode: i2s
-  '40':
-    name: DOUT
-    mode: i2s
--->
-#JustBoom Digi HAT
-* Dedicated S/PDIF output interface chip supports up to 192kHz / 24bit
-* Digital audio output over either optical (TOSLINK) or coaxial (RCA electrical) connectors
-* Low jitter, bit perfect digital output
-* Output transformer for galvanic isolation
-* Software volume control from your Raspberry Pi
-* Powered by the Raspberry Pi GPIO header
-* Optional IR receiver via GPIO25
-* All Raspberry Pi GPIO pins still accessible via 40pin unpopulated 
+<!--
+---
+name: JustBoom Digi HAT
+class: board
+type: audio
+formfactor: HAT
+manufacturer: JustBoom
+description: The JustBoom Digi HAT is a high resolution digital audio output add on board for the Raspberry Pi.
+url: https://www.justboom.co/product/justboom-digi-hat/
+github:
+schematic:
+buy: https://www.pi-supply.com/product/justboom-digi-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=Digi_HAT_Product_Link
+image: 'justboom-digi-hat.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '12':
+    name: BCKL (Bit Clock)
+    mode: i2s
+  '22':
+    name: IR Receiver
+  '23':
+    name: Rotary Encoder
+  '24':
+    name: Rotary Encoder
+  '27':
+    mode: i2c
+  '28':
+    mode: i2c
+  '35':
+    name: LRCK (Left/Right Clock)
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+-->
+#JustBoom Digi HAT
+* Dedicated S/PDIF output interface chip supports up to 192kHz / 24bit
+* Digital audio output over either optical (TOSLINK) or coaxial (RCA electrical) connectors
+* Low jitter, bit perfect digital output
+* Output transformer for galvanic isolation
+* Software volume control from your Raspberry Pi
+* Powered by the Raspberry Pi GPIO header
+* Optional IR receiver via GPIO25
+* All Raspberry Pi GPIO pins still accessible via 40pin unpopulated 
diff --git a/draft/overlay/JustBoom-Digi-pHAT.md b/draft/overlay/JustBoom-Digi-pHAT.md
index f71a527..1462038 100644
--- a/draft/overlay/JustBoom-Digi-pHAT.md
+++ b/draft/overlay/JustBoom-Digi-pHAT.md
@@ -1,57 +1,57 @@
-<!--
----
-name: JustBoom Digi HAT
-class: board
-type: audio
-formfactor: HAT
-manufacturer: JustBoom
-description: The JustBoom Digi HAT is a high resolution digital audio output add on board for the Raspberry Pi.
-url: https://www.justboom.co/product/justboom-digi-hat/
-github:
-schematic:
-buy: https://www.pi-supply.com/product/justboom-digi-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=Digi_HAT_Product_Link
-image: 'justboom-digi-hat.png'
-pincount: 40
-eeprom: yes
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    mode: i2c
-  '5':
-    mode: i2c
-  '12':
-    name: BCKL (Bit Clock)
-    mode: i2s
-  '22':
-    name: IR Receiver
-  '23':
-    name: Rotary Encoder
-  '24':
-    name: Rotary Encoder
-  '35':
-    name: LRCK (Left/Right Clock)
-    mode: i2s
-  '40':
-    name: DOUT
-    mode: i2s
--->
-#JustBoom Digi HAT
-* Dedicated S/PDIF output interface chip supports up to 192kHz / 24bit
-* Digital audio output over either optical (TOSLINK) or coaxial (RCA electrical) connectors
-* Low jitter, bit perfect digital output
-* Output transformer for galvanic isolation
-* Software volume control from your Raspberry Pi
-* Powered by the Raspberry Pi GPIO header
-* Optional IR receiver via GPIO25
-* Unused GPIO pins still accessible via unpopulated extension header
+<!--
+---
+name: JustBoom Digi pHAT
+class: board
+type: audio
+formfactor: pHAT
+manufacturer: JustBoom
+description: The JustBoom Digi pHAT is a high resolution digital audio output add on board for the Raspberry Pi.
+url: https://www.justboom.co/product/justboom-digi-hat/
+github:
+schematic:
+buy: https://www.pi-supply.com/product/justboom-digi-hat/?utm_source=JustBoom+Site&utm_medium=Link&utm_campaign=JustBoom+Referrals&utm_content=Digi_HAT_Product_Link
+image: 'justboom-digi-phat.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '12':
+    name: BCKL (Bit Clock)
+    mode: i2s
+  '22':
+    name: IR Receiver
+  '23':
+    name: Rotary Encoder
+  '24':
+    name: Rotary Encoder
+  '35':
+    name: LRCK (Left/Right Clock)
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+-->
+#JustBoom Digi pHAT
+* Dedicated S/PDIF output interface chip supports up to 192kHz / 24bit
+* Digital audio output over either optical (TOSLINK) or coaxial (RCA electrical) connectors
+* Low jitter, bit perfect digital output
+* Output transformer for galvanic isolation
+* Software volume control from your Raspberry Pi
+* Powered by the Raspberry Pi GPIO header
+* Optional IR receiver via GPIO25
+* Unused GPIO pins still accessible via unpopulated extension header
diff --git a/draft/overlay/RabbitMax.md b/draft/overlay/RabbitMax.md
index 8f0186f..ef30452 100644
--- a/draft/overlay/RabbitMax.md
+++ b/draft/overlay/RabbitMax.md
@@ -1,83 +1,83 @@
-<!--
----
-name: RabbitMax Flex
-class: board
-type: infrared,relay,button,buzzer,led,sensors,lcd,uart
-formfactor: HAT
-manufacturer: Leon Anavi
-description: RabbitMax Flex is a Raspberry Pi HAT board for IoT with an IR transmitter and receiver, relay, button, buzzer, RGB LED,  5x cable slots for I2C sensors, and a slot for 16x2 LCD display module.
-url: http://rabbitmax.com/
-github: https://github.com/RabbitMax
-schematic:
-buy: https://www.indiegogo.com/projects/rabbitmax-flex-raspberry-pi-hat-for-iot
-image: 'anavi-rabbitmax-flex.png'
-pincount: 40
-eeprom: yes
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    mode: i2c
-  '5':
-    mode: i2c
-  '7':
-    name: LCD Display (RS)
-  '11'
-    name: IR LED
-  '12'
-    name: IR Receiver
-  '13':
-    name: LCD Display (Data 0)
-  '15':
-    name: LCD Display (Data 1)
-  '19':
-    name: LCD Display (Data 2)
-  '21':
-    name: LCD Display (Data 3)
-  '23':
-    name: Button
-    mode: input
-    active: low
-  '27':
-    mode: i2c
-  '28':
-    mode: i2c
-  '29':
-    name: Relay
-  '31':
-    name: Piezo Buzzer
-  '33':
-    name: RGB LED (blue)
-  '35':
-    name: RGB LED (green)
-  '37':
-    name: RGB LED (red)
-  '40':
-    name: LCD Display (E)
--->
-#RabbitMax Flex
-Flexible HAT for Raspberry Pi suitable for do it yourself (DIY) weather station, automated desk assistant or prototyping Internet of Things (IoT).
-RabbitMax Flex Raspberry Pi HAT includes:
-
-* Relay
-* IR LED
-* IR photo sensor
-* Buzzer
-* Button
-* RGB LED
-* Slot for modular LCD character display
-* Slots for up to 5 plug and play I2C sensors
-
-Some useful resources how to get started with RabbitMax Flex Raspberry Pi HAT:
-* User's manual: http://rabbitmax.com/files/rabbitmax-flex.pdf
-* Open source sample applications in Python and C: https://github.com/RabbitMax/rabbitmax-examples
+<!--
+---
+name: RabbitMax Flex
+class: board
+type: infrared,relay,button,buzzer,led,sensors,lcd,uart
+formfactor: HAT
+manufacturer: Leon Anavi
+description: RabbitMax Flex is a Raspberry Pi HAT board for IoT with an IR transmitter and receiver, relay, button, buzzer, RGB LED,  5x cable slots for I2C sensors, and a slot for 16x2 LCD display module.
+url: http://rabbitmax.com/
+github: https://github.com/RabbitMax
+schematic:
+buy: https://www.indiegogo.com/projects/rabbitmax-flex-raspberry-pi-hat-for-iot
+image: 'anavi-rabbitmax-flex.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '7':
+    name: LCD Display (RS)
+  '11'
+    name: IR LED
+  '12'
+    name: IR Receiver
+  '13':
+    name: LCD Display (Data 0)
+  '15':
+    name: LCD Display (Data 1)
+  '19':
+    name: LCD Display (Data 2)
+  '21':
+    name: LCD Display (Data 3)
+  '23':
+    name: Button
+    mode: input
+    active: low
+  '27':
+    mode: i2c
+  '28':
+    mode: i2c
+  '29':
+    name: Relay
+  '31':
+    name: Piezo Buzzer
+  '33':
+    name: RGB LED (blue)
+  '35':
+    name: RGB LED (green)
+  '37':
+    name: RGB LED (red)
+  '40':
+    name: LCD Display (E)
+-->
+#RabbitMax Flex
+Flexible HAT for Raspberry Pi suitable for do it yourself (DIY) weather station, automated desk assistant or prototyping Internet of Things (IoT).
+RabbitMax Flex Raspberry Pi HAT includes:
+
+* Relay
+* IR LED
+* IR photo sensor
+* Buzzer
+* Button
+* RGB LED
+* Slot for modular LCD character display
+* Slots for up to 5 plug and play I2C sensors
+
+Some useful resources how to get started with RabbitMax Flex Raspberry Pi HAT:
+* User's manual: http://rabbitmax.com/files/rabbitmax-flex.pdf
+* Open source sample applications in Python and C: https://github.com/RabbitMax/rabbitmax-examples