diff --git a/draft/boards/flick-hat.png b/draft/boards/flick-hat.png
new file mode 100644
index 0000000..d611bb9
Binary files /dev/null and b/draft/boards/flick-hat.png differ
diff --git a/draft/boards/flick-zero.png b/draft/boards/flick-zero.png
new file mode 100644
index 0000000..88b6678
Binary files /dev/null and b/draft/boards/flick-zero.png differ
diff --git a/draft/overlay/flick-hat.md b/draft/overlay/flick-hat.md
new file mode 100644
index 0000000..37c89b7
--- /dev/null
+++ b/draft/overlay/flick-hat.md
@@ -0,0 +1,51 @@
+<!--
+---
+name: My Add-on Board
+class: board
+type: gesture
+formfactor: HAT
+manufacturer: Pi Supply
+description: Flick HAT is a 3D tracking and gesture pHAT.
+url: https://www.pi-supply.com/product/flick-large-standalone-3d-tracking-gesture-breakout/
+github: https://github.com/PiSupply/Flick
+buy: https://www.pi-supply.com/product/flick-hat-3d-tracking-gesture-hat-raspberry-pi/
+image: 'flick-hat.png'
+pincount: 40
+eeprom: setup
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '11':
+    name: Reset
+  '13':
+    name: TS
+i2c:
+  '0x42':
+    name: Gesture controller
+    device: MGC3130
+-->
+#Flick HAT
+Integrate Flick into your I2C project to give you multiple ways of controlling it. Using the near field gesture technology, you’re able to hide your project behind non conductive material (wood/acrylic) and still use Flick.
+
+* 3D tracking
+* Gesture sensing up to 15cm
+* Touch and Tap sensing
+* Communicates with the Raspberry Pi via I2C
+* No soldering required
+* Level shifting chip to enable board to work with 3V3 or 5V0 power and logic
+* One line installer
+* Fully CE and FCC tested and approved
diff --git a/draft/overlay/flick-zero.md b/draft/overlay/flick-zero.md
new file mode 100644
index 0000000..d5b3157
--- /dev/null
+++ b/draft/overlay/flick-zero.md
@@ -0,0 +1,51 @@
+<!--
+---
+name: My Add-on Board
+class: board
+type: gesture
+formfactor: pHAT
+manufacturer: Pi Supply
+description: Flick Zero is a 3D tracking and gesture pHAT.
+url: https://www.pi-supply.com/product/flick-large-standalone-3d-tracking-gesture-breakout/
+github: https://github.com/PiSupply/Flick
+buy: https://www.pi-supply.com/product/flick-zero-3d-tracking-gesture-phat-pi-zero/
+image: 'flick-zero.png'
+pincount: 40
+eeprom: no
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '11':
+    name: Reset
+  '13':
+    name: TS
+i2c:
+  '0x42':
+    name: Gesture controller
+    device: MGC3130
+-->
+#Flick Zero
+Integrate Flick into your I2C project to give you multiple ways of controlling it. Using the near field gesture technology, you’re able to hide your project behind non conductive material (wood/acrylic) and still use Flick.
+
+* 3D tracking
+* Gesture sensing up to 15cm
+* Touch and Tap sensing
+* Communicates with the Raspberry Pi via I2C
+* No soldering required
+* Level shifting chip to enable board to work with 3V3 or 5V0 power and logic
+* One line installer
+* Fully CE and FCC tested and approved
diff --git a/draft/overlay/justboom-amp-zero.md b/draft/overlay/justboom-amp-zero.md
new file mode 100644
index 0000000..d427382
--- /dev/null
+++ b/draft/overlay/justboom-amp-zero.md
@@ -0,0 +1,58 @@
+<!--
+---
+name: Amp Zero
+class: board
+type: audio
+formfactor: pHAT
+manufacturer: JustBoom
+description: The JustBoom Amp Zero is a high quality audio amplifier designed specifically for the Raspberry Pi.
+url: https://www.justboom.co/product/justboom-amp-zero-phat/
+buy: https://www.justboom.co/product/justboom-amp-zero-phat/
+image: 'justboom-amp-zero.png'
+pincount: 40
+eeprom: no
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '12':
+    name: BCKL (Bit Clock)
+    mode: i2s
+  '16':
+    name: Rotary Encoder
+  '18':
+    name: Rotary Encoder
+  '22':
+    name: IR Receiver
+  '35':
+    name: LRCK (Left/Right Clock)
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+i2c:
+  '0x4D':
+    name: Amplifier
+    device: TAS5756M
+-->
+#Amp Zero
+
+* Full high quality audio – 192kHz / 32bit
+* 2 x 40 Watt peak output at 4 ohms (2 x 20 Watt RMS)
+* Includes both a DAC and power amplifier
+* Back-powers the Raspberry Pi so only one power supply required
+* Hardware and software volume control from your Raspberry Pi
+* Optional IR receiver via GPIO25
diff --git a/draft/overlay/pi-poe.md b/draft/overlay/pi-poe.md
new file mode 100644
index 0000000..19aa54f
--- /dev/null
+++ b/draft/overlay/pi-poe.md
@@ -0,0 +1,55 @@
+<!--
+---
+name: Pi PoE Switch HAT
+class: board
+type: power
+formfactor: HAT
+manufacturer: Pi Supply
+description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
+url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
+github: https://github.com/PiSupply/PiPoE
+buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
+image: 'pi-poe.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '11':
+    name: Power Management
+  '15':
+    name: LED Green/Yellow
+  '16':
+    name: LED Green
+  '18':
+    name: LED Yellow/Green
+-->
+#Pi PoE Switch HAT
+The Pi PoE Switch HAT is an add on board for the Raspberry Pi that brings the Pi Supply Switch technology together with PoE all in one fantastic package!
+
+You can now power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.
+
+* Fully 802.3af (mode A and B) compliant active power over Ethernet
+* Contains physical layer power negotiation circuitry, presenting itself as a Class 0 device
+* Fully isolated switched mode power supply (SMPS) - 1500V isolation input to output
+* Overload and short circuit protection
+* Over temperature protection
+* High efficiency (up to 87%) regulated output
+* Input voltage 36-56V, output voltage 5V, output current 10-1300mA, max output power 6.5W
+* Onboard ATtiny 13A microcontroller for power management functionality
+* Leaves all unused GPIO free for use with other add on boards
+
+The onboard optional jumper toggles the power functionality:
+
+* Jumper on. The Pi PoE will power on after holding the power button for two seconds
+* Jumper off. The Pi PoE will power on as soon as you apply power from your injector