Fixed justboom amp zero and pi poe
This commit is contained in:
Phil Howard
parent
e95efb4134
commit
5228fceb03
|
|
@ -1,58 +0,0 @@
|
|||
<!--
|
||||
---
|
||||
name: Amp Zero
|
||||
class: board
|
||||
type: audio
|
||||
formfactor: pHAT
|
||||
manufacturer: JustBoom
|
||||
description: The JustBoom Amp Zero is a high quality audio amplifier designed specifically for the Raspberry Pi.
|
||||
url: https://www.justboom.co/product/justboom-amp-zero-phat/
|
||||
buy: https://www.justboom.co/product/justboom-amp-zero-phat/
|
||||
image: 'justboom-amp-zero.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'12':
|
||||
name: BCKL (Bit Clock)
|
||||
mode: i2s
|
||||
'16':
|
||||
name: Rotary Encoder
|
||||
'18':
|
||||
name: Rotary Encoder
|
||||
'22':
|
||||
name: IR Receiver
|
||||
'35':
|
||||
name: LRCK (Left/Right Clock)
|
||||
mode: i2s
|
||||
'40':
|
||||
name: DOUT
|
||||
mode: i2s
|
||||
i2c:
|
||||
'0x4D':
|
||||
name: Amplifier
|
||||
device: TAS5756M
|
||||
-->
|
||||
#Amp Zero
|
||||
|
||||
* Full high quality audio – 192kHz / 32bit
|
||||
* 2 x 40 Watt peak output at 4 ohms (2 x 20 Watt RMS)
|
||||
* Includes both a DAC and power amplifier
|
||||
* Back-powers the Raspberry Pi so only one power supply required
|
||||
* Hardware and software volume control from your Raspberry Pi
|
||||
* Optional IR receiver via GPIO25
|
||||
|
Before Width: | Height: | Size: 95 KiB After Width: | Height: | Size: 95 KiB |
|
|
@ -117,7 +117,6 @@ overlays:
|
|||
- adafruit-tft-kippah
|
||||
- scroll-phat-hd
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
- fourletter-phat
|
||||
|
|
@ -144,3 +143,4 @@ overlays:
|
|||
- flick-zero
|
||||
- flick-hat
|
||||
- mearm-pi
|
||||
- pi-poe
|
||||
|
|
|
|||
|
|
@ -31,8 +31,6 @@ pin:
|
|||
'12':
|
||||
name: BCKL (Bit Clock)
|
||||
mode: i2s
|
||||
'15':
|
||||
name: Soft Mute
|
||||
'16':
|
||||
name: Rotary Encoder
|
||||
'18':
|
||||
|
|
|
|||
|
|
@ -31,8 +31,6 @@ pin:
|
|||
'12':
|
||||
name: BCKL (Bit Clock)
|
||||
mode: i2s
|
||||
'15':
|
||||
name: Soft Mute
|
||||
'16':
|
||||
name: Rotary Encoder
|
||||
'18':
|
||||
|
|
|
|||
|
|
@ -3,15 +3,15 @@
|
|||
name: Pi PoE Switch HAT
|
||||
class: board
|
||||
type: power
|
||||
formfactor: Custom
|
||||
formfactor: HAT
|
||||
manufacturer: Pi Supply
|
||||
description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
|
||||
url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
|
||||
github: https://github.com/PiSupply/PiPoE
|
||||
buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
|
||||
image: 'pisupply-pi-poe.png'
|
||||
image: 'pi-poe.png'
|
||||
pincount: 40
|
||||
eeprom: setup
|
||||
eeprom: yes
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
|
|
@ -103,7 +103,6 @@ overlays:
|
|||
- picade-hat
|
||||
- piglow
|
||||
- pijack
|
||||
- pisupply-pi-poe
|
||||
- propeller-hat
|
||||
- rainbow-hat
|
||||
- raspio-duino
|
||||
|
|
@ -143,3 +142,4 @@ overlays:
|
|||
- flick-zero
|
||||
- flick-hat
|
||||
- mearm-pi
|
||||
- pi-poe
|
||||
|
|
|
|||
|
|
@ -117,7 +117,6 @@ overlays:
|
|||
- adafruit-tft-kippah
|
||||
- scroll-phat-hd
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
- fourletter-phat
|
||||
|
|
@ -143,3 +142,4 @@ overlays:
|
|||
- flick-zero
|
||||
- flick-hat
|
||||
- mearm-pi
|
||||
- pi-poe
|
||||
|
|
|
|||
|
|
@ -3,15 +3,15 @@
|
|||
name: Pi PoE Switch HAT
|
||||
class: board
|
||||
type: power
|
||||
formfactor: Custom
|
||||
formfactor: HAT
|
||||
manufacturer: Pi Supply
|
||||
description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
|
||||
url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
|
||||
github: https://github.com/PiSupply/PiPoE
|
||||
buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
|
||||
image: 'pisupply-pi-poe.png'
|
||||
image: 'pi-poe.png'
|
||||
pincount: 40
|
||||
eeprom: setup
|
||||
eeprom: yes
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
|
|
@ -117,7 +117,6 @@ overlays:
|
|||
- adafruit-tft-kippah
|
||||
- scroll-phat-hd
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
- fourletter-phat
|
||||
|
|
@ -144,3 +143,4 @@ overlays:
|
|||
- flick-zero
|
||||
- flick-hat
|
||||
- mearm-pi
|
||||
- pi-poe
|
||||
|
|
|
|||
|
|
@ -31,8 +31,6 @@ pin:
|
|||
'12':
|
||||
name: BCKL (Bit Clock)
|
||||
mode: i2s
|
||||
'15':
|
||||
name: Soft Mute
|
||||
'16':
|
||||
name: Rotary Encoder
|
||||
'18':
|
||||
|
|
|
|||
|
|
@ -3,15 +3,15 @@
|
|||
name: Pi PoE Switch HAT
|
||||
class: board
|
||||
type: power
|
||||
formfactor: Custom
|
||||
formfactor: HAT
|
||||
manufacturer: Pi Supply
|
||||
description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
|
||||
url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
|
||||
github: https://github.com/PiSupply/PiPoE
|
||||
buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
|
||||
image: 'pisupply-pi-poe.png'
|
||||
image: 'pi-poe.png'
|
||||
pincount: 40
|
||||
eeprom: setup
|
||||
eeprom: yes
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
|
|
@ -117,7 +117,6 @@ overlays:
|
|||
- adafruit-tft-kippah
|
||||
- scroll-phat-hd
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
- fourletter-phat
|
||||
|
|
@ -144,3 +143,4 @@ overlays:
|
|||
- flick-zero
|
||||
- flick-hat
|
||||
- mearm-pi
|
||||
- pi-poe
|
||||
|
|
|
|||
|
|
@ -31,8 +31,6 @@ pin:
|
|||
'12':
|
||||
name: BCKL (Bit Clock)
|
||||
mode: i2s
|
||||
'15':
|
||||
name: Soft Mute
|
||||
'16':
|
||||
name: Rotary Encoder
|
||||
'18':
|
||||
|
|
|
|||
|
|
@ -0,0 +1,55 @@
|
|||
<!--
|
||||
---
|
||||
name: Pi PoE Switch HAT
|
||||
class: board
|
||||
type: power
|
||||
formfactor: HAT
|
||||
manufacturer: Pi Supply
|
||||
description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
|
||||
url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
|
||||
github: https://github.com/PiSupply/PiPoE
|
||||
buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
|
||||
image: 'pi-poe.png'
|
||||
pincount: 40
|
||||
eeprom: yes
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'11':
|
||||
name: Power Management
|
||||
'15':
|
||||
name: LED Green/Yellow
|
||||
'16':
|
||||
name: LED Green
|
||||
'18':
|
||||
name: LED Yellow/Green
|
||||
-->
|
||||
#Pi PoE Switch HAT
|
||||
The Pi PoE Switch HAT is an add on board for the Raspberry Pi that brings the Pi Supply Switch technology together with PoE all in one fantastic package!
|
||||
|
||||
You can now power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.
|
||||
|
||||
* Fully 802.3af (mode A and B) compliant active power over Ethernet
|
||||
* Contains physical layer power negotiation circuitry, presenting itself as a Class 0 device
|
||||
* Fully isolated switched mode power supply (SMPS) - 1500V isolation input to output
|
||||
* Overload and short circuit protection
|
||||
* Over temperature protection
|
||||
* High efficiency (up to 87%) regulated output
|
||||
* Input voltage 36-56V, output voltage 5V, output current 10-1300mA, max output power 6.5W
|
||||
* Onboard ATtiny 13A microcontroller for power management functionality
|
||||
* Leaves all unused GPIO free for use with other add on boards
|
||||
|
||||
The onboard optional jumper toggles the power functionality:
|
||||
|
||||
* Jumper on. The Pi PoE will power on after holding the power button for two seconds
|
||||
* Jumper off. The Pi PoE will power on as soon as you apply power from your injector
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
<!--
|
||||
---
|
||||
name: Pi PoE Switch HAT
|
||||
class: board
|
||||
type: power
|
||||
formfactor: Custom
|
||||
manufacturer: Pi Supply
|
||||
description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
|
||||
url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
|
||||
github: https://github.com/PiSupply/PiPoE
|
||||
buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
|
||||
image: 'pisupply-pi-poe.png'
|
||||
pincount: 40
|
||||
eeprom: setup
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'11':
|
||||
name: Power Management
|
||||
'15':
|
||||
name: LED Green/Yellow
|
||||
'16':
|
||||
name: LED Green
|
||||
'18':
|
||||
name: LED Yellow/Green
|
||||
-->
|
||||
#Pi PoE Switch HAT
|
||||
The Pi PoE Switch HAT is an add on board for the Raspberry Pi that brings the Pi Supply Switch technology together with PoE all in one fantastic package!
|
||||
|
||||
You can now power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.
|
||||
|
||||
* Fully 802.3af (mode A and B) compliant active power over Ethernet
|
||||
* Contains physical layer power negotiation circuitry, presenting itself as a Class 0 device
|
||||
* Fully isolated switched mode power supply (SMPS) - 1500V isolation input to output
|
||||
* Overload and short circuit protection
|
||||
* Over temperature protection
|
||||
* High efficiency (up to 87%) regulated output
|
||||
* Input voltage 36-56V, output voltage 5V, output current 10-1300mA, max output power 6.5W
|
||||
* Onboard ATtiny 13A microcontroller for power management functionality
|
||||
* Leaves all unused GPIO free for use with other add on boards
|
||||
|
||||
The onboard optional jumper toggles the power functionality:
|
||||
|
||||
* Jumper on. The Pi PoE will power on after holding the power button for two seconds
|
||||
* Jumper off. The Pi PoE will power on as soon as you apply power from your injector
|
||||
|
|
@ -117,7 +117,6 @@ overlays:
|
|||
- adafruit-tft-kippah
|
||||
- scroll-phat-hd
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
- fourletter-phat
|
||||
|
|
@ -144,3 +143,4 @@ overlays:
|
|||
- flick-zero
|
||||
- flick-hat
|
||||
- mearm-pi
|
||||
- pi-poe
|
||||
|
|
|
|||
|
|
@ -31,8 +31,6 @@ pin:
|
|||
'12':
|
||||
name: BCKL (Bit Clock)
|
||||
mode: i2s
|
||||
'15':
|
||||
name: Soft Mute
|
||||
'16':
|
||||
name: Rotary Encoder
|
||||
'18':
|
||||
|
|
|
|||
|
|
@ -0,0 +1,55 @@
|
|||
<!--
|
||||
---
|
||||
name: Pi PoE Switch HAT
|
||||
class: board
|
||||
type: power
|
||||
formfactor: HAT
|
||||
manufacturer: Pi Supply
|
||||
description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
|
||||
url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
|
||||
github: https://github.com/PiSupply/PiPoE
|
||||
buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
|
||||
image: 'pi-poe.png'
|
||||
pincount: 40
|
||||
eeprom: yes
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'11':
|
||||
name: Power Management
|
||||
'15':
|
||||
name: LED Green/Yellow
|
||||
'16':
|
||||
name: LED Green
|
||||
'18':
|
||||
name: LED Yellow/Green
|
||||
-->
|
||||
#Pi PoE Switch HAT
|
||||
The Pi PoE Switch HAT is an add on board for the Raspberry Pi that brings the Pi Supply Switch technology together with PoE all in one fantastic package!
|
||||
|
||||
You can now power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.
|
||||
|
||||
* Fully 802.3af (mode A and B) compliant active power over Ethernet
|
||||
* Contains physical layer power negotiation circuitry, presenting itself as a Class 0 device
|
||||
* Fully isolated switched mode power supply (SMPS) - 1500V isolation input to output
|
||||
* Overload and short circuit protection
|
||||
* Over temperature protection
|
||||
* High efficiency (up to 87%) regulated output
|
||||
* Input voltage 36-56V, output voltage 5V, output current 10-1300mA, max output power 6.5W
|
||||
* Onboard ATtiny 13A microcontroller for power management functionality
|
||||
* Leaves all unused GPIO free for use with other add on boards
|
||||
|
||||
The onboard optional jumper toggles the power functionality:
|
||||
|
||||
* Jumper on. The Pi PoE will power on after holding the power button for two seconds
|
||||
* Jumper off. The Pi PoE will power on as soon as you apply power from your injector
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
<!--
|
||||
---
|
||||
name: Pi PoE Switch HAT
|
||||
class: board
|
||||
type: power
|
||||
formfactor: Custom
|
||||
manufacturer: Pi Supply
|
||||
description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
|
||||
url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
|
||||
github: https://github.com/PiSupply/PiPoE
|
||||
buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
|
||||
image: 'pisupply-pi-poe.png'
|
||||
pincount: 40
|
||||
eeprom: setup
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'11':
|
||||
name: Power Management
|
||||
'15':
|
||||
name: LED Green/Yellow
|
||||
'16':
|
||||
name: LED Green
|
||||
'18':
|
||||
name: LED Yellow/Green
|
||||
-->
|
||||
#Pi PoE Switch HAT
|
||||
The Pi PoE Switch HAT is an add on board for the Raspberry Pi that brings the Pi Supply Switch technology together with PoE all in one fantastic package!
|
||||
|
||||
You can now power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.
|
||||
|
||||
* Fully 802.3af (mode A and B) compliant active power over Ethernet
|
||||
* Contains physical layer power negotiation circuitry, presenting itself as a Class 0 device
|
||||
* Fully isolated switched mode power supply (SMPS) - 1500V isolation input to output
|
||||
* Overload and short circuit protection
|
||||
* Over temperature protection
|
||||
* High efficiency (up to 87%) regulated output
|
||||
* Input voltage 36-56V, output voltage 5V, output current 10-1300mA, max output power 6.5W
|
||||
* Onboard ATtiny 13A microcontroller for power management functionality
|
||||
* Leaves all unused GPIO free for use with other add on boards
|
||||
|
||||
The onboard optional jumper toggles the power functionality:
|
||||
|
||||
* Jumper on. The Pi PoE will power on after holding the power button for two seconds
|
||||
* Jumper off. The Pi PoE will power on as soon as you apply power from your injector
|
||||
Loading…
Reference in New Issue