Published multiple ada boards
Before Width: | Height: | Size: 1.1 MiB |
Before Width: | Height: | Size: 74 KiB |
Before Width: | Height: | Size: 109 KiB |
Before Width: | Height: | Size: 98 KiB |
Before Width: | Height: | Size: 45 KiB |
Before Width: | Height: | Size: 94 KiB |
@ -1,43 +0,0 @@
|
|||||||
<!--
|
|
||||||
---
|
|
||||||
name: Adafruit 16x2 Character LCD
|
|
||||||
class: board
|
|
||||||
type: Display
|
|
||||||
formfactor: Custom
|
|
||||||
manufacturer: Adafruit
|
|
||||||
description: 16x2 Character LCD and Keypad
|
|
||||||
url: https://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi
|
|
||||||
buy: https://www.adafruit.com/products/1109
|
|
||||||
image: lcd.png
|
|
||||||
pincount: 26
|
|
||||||
eeprom: no
|
|
||||||
power:
|
|
||||||
'2':
|
|
||||||
|
|
||||||
ground:
|
|
||||||
'6':
|
|
||||||
pin:
|
|
||||||
'3':
|
|
||||||
mode:SDA
|
|
||||||
'5':
|
|
||||||
mode:SCL
|
|
||||||
i2c:
|
|
||||||
'0x20':
|
|
||||||
name: MCP23017
|
|
||||||
device: MCP23017
|
|
||||||
|
|
||||||
|
|
||||||
-->
|
|
||||||
#Adafruit 16x2 Character LCD
|
|
||||||
|
|
||||||
The Adafruit plate makes it easy to use a 16x2 Character LCD. Most LCD use lots of GPIO pins but with this just using I2C you only need two pins. The keypad gives you an easy way to input to the display and it comes with an easy to use python library to make it super easy to program. Note that the same pinout applies to both positive, negative and normal LCD.
|
|
||||||
|
|
||||||
To install:
|
|
||||||
```bash
|
|
||||||
sudo apt-get update
|
|
||||||
sudo apt-get install build-essential python-dev python-smbus python-pip git
|
|
||||||
sudo pip install RPi.GPIO
|
|
||||||
git clone https://github.com/adafruit/Adafruit_Python_CharLCD.git
|
|
||||||
cd Adafruit_Python_CharLCD
|
|
||||||
sudo python setup.py install
|
|
||||||
```
|
|
@ -1,44 +0,0 @@
|
|||||||
<!--
|
|
||||||
---
|
|
||||||
name: Adafruit PiRTC
|
|
||||||
class: board
|
|
||||||
type: RTC
|
|
||||||
formfactor: Custom
|
|
||||||
manufacturer: Adafruit
|
|
||||||
description: Add a simple RTC to your pi
|
|
||||||
url: https://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/set-up-and-test-i2c
|
|
||||||
buy: https://www.adafruit.com/products/3386
|
|
||||||
image: rtc.png
|
|
||||||
pincount: 6
|
|
||||||
eeprom: no
|
|
||||||
power:
|
|
||||||
'1':
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
ground:
|
|
||||||
'6':
|
|
||||||
|
|
||||||
|
|
||||||
pin:
|
|
||||||
'3':
|
|
||||||
mode:SDA
|
|
||||||
'5':
|
|
||||||
mode:SCL
|
|
||||||
|
|
||||||
i2c:
|
|
||||||
'0x68':
|
|
||||||
name: PCF8523
|
|
||||||
device: PCF8523
|
|
||||||
|
|
||||||
|
|
||||||
-->
|
|
||||||
#Adafruit PiRTC
|
|
||||||
|
|
||||||
This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to
|
|
||||||
keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping,
|
|
||||||
timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native
|
|
||||||
kernel support.
|
|
||||||
|
|
||||||
This RTC will keep the time for about 5 years. The PCF8523 is simple and inexpensive but not a high
|
|
||||||
precision device. It may lose or gain a second or two per day.
|
|
BIN
resources/boards/adafruit-16x2-lcd.png
Normal file
After Width: | Height: | Size: 62 KiB |
Before Width: | Height: | Size: 50 KiB After Width: | Height: | Size: 64 KiB |
BIN
resources/boards/adafruit-arcade-bonnet.png
Normal file
After Width: | Height: | Size: 48 KiB |
BIN
resources/boards/adafruit-motor-hat.png
Normal file
After Width: | Height: | Size: 105 KiB |
BIN
resources/boards/adafruit-pi-rtc.png
Normal file
After Width: | Height: | Size: 12 KiB |
BIN
resources/boards/adafruit-rgb-matrix-hat.png
Normal file
After Width: | Height: | Size: 87 KiB |
BIN
resources/boards/adafruit-tft-kippah.png
Normal file
After Width: | Height: | Size: 76 KiB |
@ -109,3 +109,9 @@ overlays:
|
|||||||
- picade-hat
|
- picade-hat
|
||||||
- speaker-phat
|
- speaker-phat
|
||||||
- pi-cap
|
- pi-cap
|
||||||
|
- adafruit-rgb-matrix-hat
|
||||||
|
- adafruit-16x2-lcd
|
||||||
|
- adafruit-arcade-bonnet
|
||||||
|
- adafruit-motor-hat
|
||||||
|
- adafruit-pi-rtc
|
||||||
|
- adafruit-tft-kippah
|
||||||
|
45
src/de/translate/adafruit-16x2-lcd.md
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit 16x2 Character LCD
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: 16x2 Character LCD and Keypad
|
||||||
|
url: https://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/1109
|
||||||
|
image: adafruit-16x2-lcd.png
|
||||||
|
pincount: 26
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit 16x2 Character LCD
|
||||||
|
|
||||||
|
This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins.
|
||||||
|
|
||||||
|
The keypad gives you buttons to input to the display and it comes with a python library to make it super easy to program.
|
||||||
|
|
||||||
|
Note that the same pinout applies to both positive, negative and normal LCD.
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install build-essential python-dev python-smbus python-pip git
|
||||||
|
sudo pip install RPi.GPIO
|
||||||
|
git clone https://github.com/adafruit/Adafruit_Python_CharLCD.git
|
||||||
|
cd Adafruit_Python_CharLCD
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
@ -8,7 +8,7 @@
|
|||||||
description: Connect joystick,buttons and speakers to your pi
|
description: Connect joystick,buttons and speakers to your pi
|
||||||
url: https://learn.adafruit.com/adafruit-arcade-bonnet-for-raspberry-pi
|
url: https://learn.adafruit.com/adafruit-arcade-bonnet-for-raspberry-pi
|
||||||
buy: https://www.adafruit.com/products/3422
|
buy: https://www.adafruit.com/products/3422
|
||||||
image: arcade_bonnet.png
|
image: adafruit-arcade-bonnet.png
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: no
|
eeprom: no
|
||||||
power:
|
power:
|
||||||
@ -16,8 +16,6 @@
|
|||||||
'1':
|
'1':
|
||||||
'4':
|
'4':
|
||||||
'17':
|
'17':
|
||||||
|
|
||||||
|
|
||||||
ground:
|
ground:
|
||||||
'6':
|
'6':
|
||||||
'9':
|
'9':
|
||||||
@ -29,39 +27,40 @@
|
|||||||
'25':
|
'25':
|
||||||
pin:
|
pin:
|
||||||
'3':
|
'3':
|
||||||
mode:SDA
|
mode: i2c
|
||||||
'5':
|
'5':
|
||||||
mode:SCL
|
mode: i2c
|
||||||
'11':
|
|
||||||
mode:I2S
|
|
||||||
'12':
|
'12':
|
||||||
mode:I2S
|
name: I2S Clk
|
||||||
'35':
|
'35':
|
||||||
mode:I2S
|
name: I2S FS
|
||||||
'40':
|
'40':
|
||||||
mode:I2S
|
name: I2S Dout
|
||||||
i2c:
|
i2c:
|
||||||
'0x26':
|
'0x26':
|
||||||
name: MCP23017
|
name: MCP23017
|
||||||
device: MCP23017
|
device: MCP23017
|
||||||
|
|
||||||
|
|
||||||
-->
|
-->
|
||||||
#Adafruit Arcade Bonnet
|
#Adafruit Arcade Bonnet
|
||||||
|
|
||||||
This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here is some features!:
|
This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here is some features!:
|
||||||
|
|
||||||
It is the same size as a Pi Zero, so for really compact builds, this is super small. You can use it with a Pi 2, 3, B+ or any 2x20 connector Pi.
|
It is the same size as a Pi Zero, so for really compact builds, this is super small. You can use it with a Pi 2, 3, B+ or any 2x20 connector Pi.
|
||||||
It has JST sockets so you can plug in six arcade buttons easily
|
|
||||||
|
It has JST sockets so you can plug in six arcade buttons easily.
|
||||||
|
|
||||||
Header breakouts for use with both clicky-type switched joysticks and...
|
Header breakouts for use with both clicky-type switched joysticks and...
|
||||||
|
|
||||||
Header breakout and converter for using analog-type joysticks or thumbsticks with potentiometers inside
|
Header breakout and converter for using analog-type joysticks or thumbsticks with potentiometers inside
|
||||||
A 3W speaker output that can drive 4-8 ohm speakers for when using with a TV output, HDMI display or PiTFT
|
|
||||||
|
A 3W speaker output that can drive 4-8 ohm speakers for when using with a TV output, HDMI display or PiTFT.
|
||||||
|
|
||||||
Switches are all managed with an I2C-GPIO converter with interrupt out. The converter is very fast and frees up all the pins so you can use this Bonnet with a PiTFT or any other accessory/device that uses a lot of pins!
|
Switches are all managed with an I2C-GPIO converter with interrupt out. The converter is very fast and frees up all the pins so you can use this Bonnet with a PiTFT or any other accessory/device that uses a lot of pins!
|
||||||
|
|
||||||
To install:
|
To install:
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/arcade-bonnet.sh
|
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/arcade-bonnet.sh
|
||||||
sudo bash arcade-bonnet.sh
|
sudo bash arcade-bonnet.sh
|
||||||
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash
|
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash
|
||||||
```
|
```
|
||||||
|
|
@ -8,13 +8,12 @@
|
|||||||
description: Drive 4 DC Motors or 2 Stepper Motors with a raspberry pi.
|
description: Drive 4 DC Motors or 2 Stepper Motors with a raspberry pi.
|
||||||
url: https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi
|
url: https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi
|
||||||
buy: https://www.adafruit.com/products/2348
|
buy: https://www.adafruit.com/products/2348
|
||||||
image: adafruit_motor.png
|
image: adafruit-motor-hat.png
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: yes
|
eeprom: yes
|
||||||
power:
|
power:
|
||||||
'17':
|
'17':
|
||||||
'1':
|
'1':
|
||||||
|
|
||||||
ground:
|
ground:
|
||||||
'9':
|
'9':
|
||||||
'25':
|
'25':
|
||||||
@ -26,36 +25,36 @@
|
|||||||
'6':
|
'6':
|
||||||
pin:
|
pin:
|
||||||
'3':
|
'3':
|
||||||
mode:SDA
|
mode: i2c
|
||||||
'5':
|
'5':
|
||||||
mode:SCL
|
mode: i2c
|
||||||
i2c:
|
i2c:
|
||||||
'0x20':
|
'0x20':
|
||||||
name: TB6612
|
name: TB6612
|
||||||
device: TB6612
|
device: TB6612
|
||||||
|
|
||||||
-->
|
-->
|
||||||
#Adafruit DC & Stepper Motor HAT
|
#Adafruit DC & Stepper Motor HAT
|
||||||
|
|
||||||
|
|
||||||
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
|
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
|
||||||
|
|
||||||
Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two)
|
Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two)
|
||||||
|
|
||||||
Specs:
|
Specs:
|
||||||
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
|
|
||||||
|
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes.
|
||||||
|
|
||||||
|
Can run motors on 4.5VDC to 13.5VDC.
|
||||||
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
|
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
|
||||||
|
|
||||||
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
|
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
|
||||||
|
|
||||||
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
|
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
|
||||||
|
|
||||||
To install:
|
To install:
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
git clone https://github.com/adafruit/Adafruit-Motor-HAT-Python-Library.git
|
git clone https://github.com/adafruit/Adafruit-Motor-HAT-Python-Library.git
|
||||||
cd Adafruit-Motor-HAT-Python-Library
|
cd Adafruit-Motor-HAT-Python-Library
|
||||||
sudo apt-get install python-dev
|
sudo apt-get install python-dev
|
||||||
sudo python setup.py install
|
sudo python setup.py install
|
||||||
```
|
```
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
32
src/de/translate/adafruit-pi-rtc.md
Normal file
@ -0,0 +1,32 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit PiRTC
|
||||||
|
class: board
|
||||||
|
type: RTC
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Add a simple RTC to your pi
|
||||||
|
url: https://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/set-up-and-test-i2c
|
||||||
|
buy: https://www.adafruit.com/products/3386
|
||||||
|
image: adafruit-pi-rtc.png
|
||||||
|
pincount: 6
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: PCF8523
|
||||||
|
device: PCF8523
|
||||||
|
-->
|
||||||
|
#Adafruit PiRTC
|
||||||
|
|
||||||
|
This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support.
|
||||||
|
|
||||||
|
This RTC will keep the time for about 5 years. The PCF8523 is simple and inexpensive but not a high precision device. It may lose or gain a second or two per day.
|
@ -8,7 +8,7 @@
|
|||||||
description: Run large HUB75 matrices of a Raspberry Pi
|
description: Run large HUB75 matrices of a Raspberry Pi
|
||||||
url: https://learn.adafruit.com/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi
|
url: https://learn.adafruit.com/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi
|
||||||
buy: https://www.adafruit.com/products/2345
|
buy: https://www.adafruit.com/products/2345
|
||||||
image: adafruit_matrix.png
|
image: adafruit-rgb-matrix-hat.png
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: yes
|
eeprom: yes
|
||||||
power:
|
power:
|
||||||
@ -43,7 +43,6 @@
|
|||||||
'37':
|
'37':
|
||||||
'13':
|
'13':
|
||||||
'38':
|
'38':
|
||||||
|
|
||||||
i2c:
|
i2c:
|
||||||
'0x68':
|
'0x68':
|
||||||
name: DS1307
|
name: DS1307
|
||||||
@ -51,7 +50,6 @@ i2c:
|
|||||||
-->
|
-->
|
||||||
#Adafruit RGB Matrix HAT + RTC
|
#Adafruit RGB Matrix HAT + RTC
|
||||||
|
|
||||||
|
|
||||||
This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.
|
This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.
|
||||||
|
|
||||||
Features:
|
Features:
|
||||||
@ -62,6 +60,7 @@ Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and g
|
|||||||
DS1307 Real Time Clock can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays
|
DS1307 Real Time Clock can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays
|
||||||
|
|
||||||
To install:
|
To install:
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
sudo apt-get update
|
sudo apt-get update
|
||||||
sudo apt-get install python-dev python-imaging
|
sudo apt-get install python-dev python-imaging
|
||||||
@ -70,3 +69,4 @@ unzip master.zip
|
|||||||
cd rpi-rgb-led-matrix-master/
|
cd rpi-rgb-led-matrix-master/
|
||||||
make
|
make
|
||||||
```
|
```
|
||||||
|
|
@ -8,7 +8,7 @@
|
|||||||
description: Run 40 pin TFT's of a Raspberry Pi
|
description: Run 40 pin TFT's of a Raspberry Pi
|
||||||
url: https://learn.adafruit.com/adafruit-dpi-display-kippah-ttl-tft
|
url: https://learn.adafruit.com/adafruit-dpi-display-kippah-ttl-tft
|
||||||
buy: https://www.adafruit.com/products/2453
|
buy: https://www.adafruit.com/products/2453
|
||||||
image: tft_kippah.png
|
image: adafruit-tft-kippah.png
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: no
|
eeprom: no
|
||||||
power:
|
power:
|
||||||
@ -16,7 +16,6 @@
|
|||||||
'2':
|
'2':
|
||||||
'4':
|
'4':
|
||||||
'17':
|
'17':
|
||||||
|
|
||||||
ground:
|
ground:
|
||||||
'9':
|
'9':
|
||||||
'25':
|
'25':
|
||||||
@ -47,15 +46,15 @@
|
|||||||
'35':
|
'35':
|
||||||
'38':
|
'38':
|
||||||
'40':
|
'40':
|
||||||
|
|
||||||
|
|
||||||
-->
|
-->
|
||||||
#Adafruit DPI TFT Kippah
|
#Adafruit DPI TFT Kippah
|
||||||
|
|
||||||
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.
|
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.
|
||||||
|
|
||||||
The catch is this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.
|
The catch is this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.
|
||||||
|
|
||||||
The other catch is that this display replaces the HDMI/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two.
|
The other catch is that this display replaces the HDMI/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two.
|
||||||
|
|
||||||
Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something.
|
Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something.
|
||||||
|
|
||||||
Please note it is the same pinout for the touchscreen and none touchscreen version of the board.
|
Please note it is the same pinout for the touchscreen and none touchscreen version of the board.
|
45
src/en/overlay/adafruit-16x2-lcd.md
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit 16x2 Character LCD
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: 16x2 Character LCD and Keypad
|
||||||
|
url: https://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/1109
|
||||||
|
image: adafruit-16x2-lcd.png
|
||||||
|
pincount: 26
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit 16x2 Character LCD
|
||||||
|
|
||||||
|
This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins.
|
||||||
|
|
||||||
|
The keypad gives you buttons to input to the display and it comes with a python library to make it super easy to program.
|
||||||
|
|
||||||
|
Note that the same pinout applies to both positive, negative and normal LCD.
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install build-essential python-dev python-smbus python-pip git
|
||||||
|
sudo pip install RPi.GPIO
|
||||||
|
git clone https://github.com/adafruit/Adafruit_Python_CharLCD.git
|
||||||
|
cd Adafruit_Python_CharLCD
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
66
src/en/overlay/adafruit-arcade-bonnet.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit Arcade Bonnet
|
||||||
|
class: board
|
||||||
|
type: IO
|
||||||
|
formfactor: PHAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Connect joystick,buttons and speakers to your pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-arcade-bonnet-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/3422
|
||||||
|
image: adafruit-arcade-bonnet.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
'1':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
'25':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: I2S Clk
|
||||||
|
'35':
|
||||||
|
name: I2S FS
|
||||||
|
'40':
|
||||||
|
name: I2S Dout
|
||||||
|
i2c:
|
||||||
|
'0x26':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit Arcade Bonnet
|
||||||
|
|
||||||
|
This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here is some features!:
|
||||||
|
|
||||||
|
It is the same size as a Pi Zero, so for really compact builds, this is super small. You can use it with a Pi 2, 3, B+ or any 2x20 connector Pi.
|
||||||
|
|
||||||
|
It has JST sockets so you can plug in six arcade buttons easily.
|
||||||
|
|
||||||
|
Header breakouts for use with both clicky-type switched joysticks and...
|
||||||
|
|
||||||
|
Header breakout and converter for using analog-type joysticks or thumbsticks with potentiometers inside
|
||||||
|
|
||||||
|
A 3W speaker output that can drive 4-8 ohm speakers for when using with a TV output, HDMI display or PiTFT.
|
||||||
|
|
||||||
|
Switches are all managed with an I2C-GPIO converter with interrupt out. The converter is very fast and frees up all the pins so you can use this Bonnet with a PiTFT or any other accessory/device that uses a lot of pins!
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/arcade-bonnet.sh
|
||||||
|
sudo bash arcade-bonnet.sh
|
||||||
|
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash
|
||||||
|
```
|
60
src/en/overlay/adafruit-motor-hat.md
Normal file
@ -0,0 +1,60 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DC & Stepper Motor HAT
|
||||||
|
class: board
|
||||||
|
type: Motor
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Drive 4 DC Motors or 2 Stepper Motors with a raspberry pi.
|
||||||
|
url: https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2348
|
||||||
|
image: adafruit-motor-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'17':
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: TB6612
|
||||||
|
device: TB6612
|
||||||
|
-->
|
||||||
|
#Adafruit DC & Stepper Motor HAT
|
||||||
|
|
||||||
|
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
|
||||||
|
|
||||||
|
Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two)
|
||||||
|
|
||||||
|
Specs:
|
||||||
|
|
||||||
|
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes.
|
||||||
|
|
||||||
|
Can run motors on 4.5VDC to 13.5VDC.
|
||||||
|
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
|
||||||
|
|
||||||
|
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
|
||||||
|
|
||||||
|
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
git clone https://github.com/adafruit/Adafruit-Motor-HAT-Python-Library.git
|
||||||
|
cd Adafruit-Motor-HAT-Python-Library
|
||||||
|
sudo apt-get install python-dev
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
32
src/en/overlay/adafruit-pi-rtc.md
Normal file
@ -0,0 +1,32 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit PiRTC
|
||||||
|
class: board
|
||||||
|
type: RTC
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Add a simple RTC to your pi
|
||||||
|
url: https://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/set-up-and-test-i2c
|
||||||
|
buy: https://www.adafruit.com/products/3386
|
||||||
|
image: adafruit-pi-rtc.png
|
||||||
|
pincount: 6
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: PCF8523
|
||||||
|
device: PCF8523
|
||||||
|
-->
|
||||||
|
#Adafruit PiRTC
|
||||||
|
|
||||||
|
This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support.
|
||||||
|
|
||||||
|
This RTC will keep the time for about 5 years. The PCF8523 is simple and inexpensive but not a high precision device. It may lose or gain a second or two per day.
|
72
src/en/overlay/adafruit-rgb-matrix-hat.md
Normal file
@ -0,0 +1,72 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit RGB Matrix HAT + RTC
|
||||||
|
class: board
|
||||||
|
type: LED
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run large HUB75 matrices of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2345
|
||||||
|
image: adafruit-rgb-matrix-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: I2C
|
||||||
|
'5':
|
||||||
|
mode: I2C
|
||||||
|
'29':
|
||||||
|
'33':
|
||||||
|
'31':
|
||||||
|
'32':
|
||||||
|
'36':
|
||||||
|
'16':
|
||||||
|
'7':
|
||||||
|
'11':
|
||||||
|
'40':
|
||||||
|
'15':
|
||||||
|
'37':
|
||||||
|
'13':
|
||||||
|
'38':
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: DS1307
|
||||||
|
device: DS1307
|
||||||
|
-->
|
||||||
|
#Adafruit RGB Matrix HAT + RTC
|
||||||
|
|
||||||
|
This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.
|
||||||
|
|
||||||
|
Features:
|
||||||
|
|
||||||
|
Simple design - plug in power, plug in IDC cable, run our Python code!
|
||||||
|
Power protection circuitry - you can plug a 5V 4A wall adapter into the HAT and it will automatically protect against negative, over or under-voltages! Yay for no accidental destruction of your setup.
|
||||||
|
Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving
|
||||||
|
DS1307 Real Time Clock can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install python-dev python-imaging
|
||||||
|
wget https://github.com/adafruit/rpi-rgb-led-matrix/archive/master.zip
|
||||||
|
unzip master.zip
|
||||||
|
cd rpi-rgb-led-matrix-master/
|
||||||
|
make
|
||||||
|
```
|
||||||
|
|
62
src/en/overlay/adafruit-tft-kippah.md
Normal file
@ -0,0 +1,62 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DPI TFT Kippah
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run 40 pin TFT's of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-dpi-display-kippah-ttl-tft
|
||||||
|
buy: https://www.adafruit.com/products/2453
|
||||||
|
image: adafruit-tft-kippah.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
'5':
|
||||||
|
'7':
|
||||||
|
'29':
|
||||||
|
'31':
|
||||||
|
'26':
|
||||||
|
'24':
|
||||||
|
'21':
|
||||||
|
'19':
|
||||||
|
'23':
|
||||||
|
'32':
|
||||||
|
'33':
|
||||||
|
'8':
|
||||||
|
'10':
|
||||||
|
'36':
|
||||||
|
'11':
|
||||||
|
'12':
|
||||||
|
'35':
|
||||||
|
'38':
|
||||||
|
'40':
|
||||||
|
-->
|
||||||
|
#Adafruit DPI TFT Kippah
|
||||||
|
|
||||||
|
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.
|
||||||
|
|
||||||
|
The catch is this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.
|
||||||
|
|
||||||
|
The other catch is that this display replaces the HDMI/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two.
|
||||||
|
|
||||||
|
Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something.
|
||||||
|
|
||||||
|
Please note it is the same pinout for the touchscreen and none touchscreen version of the board.
|
||||||
|
|
||||||
|
For installation instructions please follow Asdafruits tutorial linked below
|
@ -109,3 +109,9 @@ overlays:
|
|||||||
- picade-hat
|
- picade-hat
|
||||||
- speaker-phat
|
- speaker-phat
|
||||||
- pi-cap
|
- pi-cap
|
||||||
|
- adafruit-rgb-matrix-hat
|
||||||
|
- adafruit-16x2-lcd
|
||||||
|
- adafruit-arcade-bonnet
|
||||||
|
- adafruit-motor-hat
|
||||||
|
- adafruit-pi-rtc
|
||||||
|
- adafruit-tft-kippah
|
||||||
|
@ -109,3 +109,9 @@ overlays:
|
|||||||
- picade-hat
|
- picade-hat
|
||||||
- speaker-phat
|
- speaker-phat
|
||||||
- pi-cap
|
- pi-cap
|
||||||
|
- adafruit-rgb-matrix-hat
|
||||||
|
- adafruit-16x2-lcd
|
||||||
|
- adafruit-arcade-bonnet
|
||||||
|
- adafruit-motor-hat
|
||||||
|
- adafruit-pi-rtc
|
||||||
|
- adafruit-tft-kippah
|
||||||
|
45
src/es/translate/adafruit-16x2-lcd.md
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit 16x2 Character LCD
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: 16x2 Character LCD and Keypad
|
||||||
|
url: https://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/1109
|
||||||
|
image: adafruit-16x2-lcd.png
|
||||||
|
pincount: 26
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit 16x2 Character LCD
|
||||||
|
|
||||||
|
This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins.
|
||||||
|
|
||||||
|
The keypad gives you buttons to input to the display and it comes with a python library to make it super easy to program.
|
||||||
|
|
||||||
|
Note that the same pinout applies to both positive, negative and normal LCD.
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install build-essential python-dev python-smbus python-pip git
|
||||||
|
sudo pip install RPi.GPIO
|
||||||
|
git clone https://github.com/adafruit/Adafruit_Python_CharLCD.git
|
||||||
|
cd Adafruit_Python_CharLCD
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
66
src/es/translate/adafruit-arcade-bonnet.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit Arcade Bonnet
|
||||||
|
class: board
|
||||||
|
type: IO
|
||||||
|
formfactor: PHAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Connect joystick,buttons and speakers to your pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-arcade-bonnet-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/3422
|
||||||
|
image: adafruit-arcade-bonnet.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
'1':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
'25':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: I2S Clk
|
||||||
|
'35':
|
||||||
|
name: I2S FS
|
||||||
|
'40':
|
||||||
|
name: I2S Dout
|
||||||
|
i2c:
|
||||||
|
'0x26':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit Arcade Bonnet
|
||||||
|
|
||||||
|
This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here is some features!:
|
||||||
|
|
||||||
|
It is the same size as a Pi Zero, so for really compact builds, this is super small. You can use it with a Pi 2, 3, B+ or any 2x20 connector Pi.
|
||||||
|
|
||||||
|
It has JST sockets so you can plug in six arcade buttons easily.
|
||||||
|
|
||||||
|
Header breakouts for use with both clicky-type switched joysticks and...
|
||||||
|
|
||||||
|
Header breakout and converter for using analog-type joysticks or thumbsticks with potentiometers inside
|
||||||
|
|
||||||
|
A 3W speaker output that can drive 4-8 ohm speakers for when using with a TV output, HDMI display or PiTFT.
|
||||||
|
|
||||||
|
Switches are all managed with an I2C-GPIO converter with interrupt out. The converter is very fast and frees up all the pins so you can use this Bonnet with a PiTFT or any other accessory/device that uses a lot of pins!
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/arcade-bonnet.sh
|
||||||
|
sudo bash arcade-bonnet.sh
|
||||||
|
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash
|
||||||
|
```
|
60
src/es/translate/adafruit-motor-hat.md
Normal file
@ -0,0 +1,60 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DC & Stepper Motor HAT
|
||||||
|
class: board
|
||||||
|
type: Motor
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Drive 4 DC Motors or 2 Stepper Motors with a raspberry pi.
|
||||||
|
url: https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2348
|
||||||
|
image: adafruit-motor-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'17':
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: TB6612
|
||||||
|
device: TB6612
|
||||||
|
-->
|
||||||
|
#Adafruit DC & Stepper Motor HAT
|
||||||
|
|
||||||
|
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
|
||||||
|
|
||||||
|
Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two)
|
||||||
|
|
||||||
|
Specs:
|
||||||
|
|
||||||
|
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes.
|
||||||
|
|
||||||
|
Can run motors on 4.5VDC to 13.5VDC.
|
||||||
|
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
|
||||||
|
|
||||||
|
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
|
||||||
|
|
||||||
|
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
git clone https://github.com/adafruit/Adafruit-Motor-HAT-Python-Library.git
|
||||||
|
cd Adafruit-Motor-HAT-Python-Library
|
||||||
|
sudo apt-get install python-dev
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
32
src/es/translate/adafruit-pi-rtc.md
Normal file
@ -0,0 +1,32 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit PiRTC
|
||||||
|
class: board
|
||||||
|
type: RTC
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Add a simple RTC to your pi
|
||||||
|
url: https://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/set-up-and-test-i2c
|
||||||
|
buy: https://www.adafruit.com/products/3386
|
||||||
|
image: adafruit-pi-rtc.png
|
||||||
|
pincount: 6
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: PCF8523
|
||||||
|
device: PCF8523
|
||||||
|
-->
|
||||||
|
#Adafruit PiRTC
|
||||||
|
|
||||||
|
This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support.
|
||||||
|
|
||||||
|
This RTC will keep the time for about 5 years. The PCF8523 is simple and inexpensive but not a high precision device. It may lose or gain a second or two per day.
|
72
src/es/translate/adafruit-rgb-matrix-hat.md
Normal file
@ -0,0 +1,72 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit RGB Matrix HAT + RTC
|
||||||
|
class: board
|
||||||
|
type: LED
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run large HUB75 matrices of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2345
|
||||||
|
image: adafruit-rgb-matrix-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: I2C
|
||||||
|
'5':
|
||||||
|
mode: I2C
|
||||||
|
'29':
|
||||||
|
'33':
|
||||||
|
'31':
|
||||||
|
'32':
|
||||||
|
'36':
|
||||||
|
'16':
|
||||||
|
'7':
|
||||||
|
'11':
|
||||||
|
'40':
|
||||||
|
'15':
|
||||||
|
'37':
|
||||||
|
'13':
|
||||||
|
'38':
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: DS1307
|
||||||
|
device: DS1307
|
||||||
|
-->
|
||||||
|
#Adafruit RGB Matrix HAT + RTC
|
||||||
|
|
||||||
|
This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.
|
||||||
|
|
||||||
|
Features:
|
||||||
|
|
||||||
|
Simple design - plug in power, plug in IDC cable, run our Python code!
|
||||||
|
Power protection circuitry - you can plug a 5V 4A wall adapter into the HAT and it will automatically protect against negative, over or under-voltages! Yay for no accidental destruction of your setup.
|
||||||
|
Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving
|
||||||
|
DS1307 Real Time Clock can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install python-dev python-imaging
|
||||||
|
wget https://github.com/adafruit/rpi-rgb-led-matrix/archive/master.zip
|
||||||
|
unzip master.zip
|
||||||
|
cd rpi-rgb-led-matrix-master/
|
||||||
|
make
|
||||||
|
```
|
||||||
|
|
62
src/es/translate/adafruit-tft-kippah.md
Normal file
@ -0,0 +1,62 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DPI TFT Kippah
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run 40 pin TFT's of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-dpi-display-kippah-ttl-tft
|
||||||
|
buy: https://www.adafruit.com/products/2453
|
||||||
|
image: adafruit-tft-kippah.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
'5':
|
||||||
|
'7':
|
||||||
|
'29':
|
||||||
|
'31':
|
||||||
|
'26':
|
||||||
|
'24':
|
||||||
|
'21':
|
||||||
|
'19':
|
||||||
|
'23':
|
||||||
|
'32':
|
||||||
|
'33':
|
||||||
|
'8':
|
||||||
|
'10':
|
||||||
|
'36':
|
||||||
|
'11':
|
||||||
|
'12':
|
||||||
|
'35':
|
||||||
|
'38':
|
||||||
|
'40':
|
||||||
|
-->
|
||||||
|
#Adafruit DPI TFT Kippah
|
||||||
|
|
||||||
|
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.
|
||||||
|
|
||||||
|
The catch is this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.
|
||||||
|
|
||||||
|
The other catch is that this display replaces the HDMI/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two.
|
||||||
|
|
||||||
|
Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something.
|
||||||
|
|
||||||
|
Please note it is the same pinout for the touchscreen and none touchscreen version of the board.
|
||||||
|
|
||||||
|
For installation instructions please follow Asdafruits tutorial linked below
|
@ -109,3 +109,9 @@ overlays:
|
|||||||
- picade-hat
|
- picade-hat
|
||||||
- speaker-phat
|
- speaker-phat
|
||||||
- pi-cap
|
- pi-cap
|
||||||
|
- adafruit-rgb-matrix-hat
|
||||||
|
- adafruit-16x2-lcd
|
||||||
|
- adafruit-arcade-bonnet
|
||||||
|
- adafruit-motor-hat
|
||||||
|
- adafruit-pi-rtc
|
||||||
|
- adafruit-tft-kippah
|
||||||
|
45
src/fr/translate/adafruit-16x2-lcd.md
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit 16x2 Character LCD
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: 16x2 Character LCD and Keypad
|
||||||
|
url: https://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/1109
|
||||||
|
image: adafruit-16x2-lcd.png
|
||||||
|
pincount: 26
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit 16x2 Character LCD
|
||||||
|
|
||||||
|
This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins.
|
||||||
|
|
||||||
|
The keypad gives you buttons to input to the display and it comes with a python library to make it super easy to program.
|
||||||
|
|
||||||
|
Note that the same pinout applies to both positive, negative and normal LCD.
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install build-essential python-dev python-smbus python-pip git
|
||||||
|
sudo pip install RPi.GPIO
|
||||||
|
git clone https://github.com/adafruit/Adafruit_Python_CharLCD.git
|
||||||
|
cd Adafruit_Python_CharLCD
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
66
src/fr/translate/adafruit-arcade-bonnet.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit Arcade Bonnet
|
||||||
|
class: board
|
||||||
|
type: IO
|
||||||
|
formfactor: PHAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Connect joystick,buttons and speakers to your pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-arcade-bonnet-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/3422
|
||||||
|
image: adafruit-arcade-bonnet.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
'1':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
'25':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: I2S Clk
|
||||||
|
'35':
|
||||||
|
name: I2S FS
|
||||||
|
'40':
|
||||||
|
name: I2S Dout
|
||||||
|
i2c:
|
||||||
|
'0x26':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit Arcade Bonnet
|
||||||
|
|
||||||
|
This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here is some features!:
|
||||||
|
|
||||||
|
It is the same size as a Pi Zero, so for really compact builds, this is super small. You can use it with a Pi 2, 3, B+ or any 2x20 connector Pi.
|
||||||
|
|
||||||
|
It has JST sockets so you can plug in six arcade buttons easily.
|
||||||
|
|
||||||
|
Header breakouts for use with both clicky-type switched joysticks and...
|
||||||
|
|
||||||
|
Header breakout and converter for using analog-type joysticks or thumbsticks with potentiometers inside
|
||||||
|
|
||||||
|
A 3W speaker output that can drive 4-8 ohm speakers for when using with a TV output, HDMI display or PiTFT.
|
||||||
|
|
||||||
|
Switches are all managed with an I2C-GPIO converter with interrupt out. The converter is very fast and frees up all the pins so you can use this Bonnet with a PiTFT or any other accessory/device that uses a lot of pins!
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/arcade-bonnet.sh
|
||||||
|
sudo bash arcade-bonnet.sh
|
||||||
|
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash
|
||||||
|
```
|
60
src/fr/translate/adafruit-motor-hat.md
Normal file
@ -0,0 +1,60 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DC & Stepper Motor HAT
|
||||||
|
class: board
|
||||||
|
type: Motor
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Drive 4 DC Motors or 2 Stepper Motors with a raspberry pi.
|
||||||
|
url: https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2348
|
||||||
|
image: adafruit-motor-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'17':
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: TB6612
|
||||||
|
device: TB6612
|
||||||
|
-->
|
||||||
|
#Adafruit DC & Stepper Motor HAT
|
||||||
|
|
||||||
|
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
|
||||||
|
|
||||||
|
Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two)
|
||||||
|
|
||||||
|
Specs:
|
||||||
|
|
||||||
|
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes.
|
||||||
|
|
||||||
|
Can run motors on 4.5VDC to 13.5VDC.
|
||||||
|
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
|
||||||
|
|
||||||
|
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
|
||||||
|
|
||||||
|
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
git clone https://github.com/adafruit/Adafruit-Motor-HAT-Python-Library.git
|
||||||
|
cd Adafruit-Motor-HAT-Python-Library
|
||||||
|
sudo apt-get install python-dev
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
32
src/fr/translate/adafruit-pi-rtc.md
Normal file
@ -0,0 +1,32 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit PiRTC
|
||||||
|
class: board
|
||||||
|
type: RTC
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Add a simple RTC to your pi
|
||||||
|
url: https://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/set-up-and-test-i2c
|
||||||
|
buy: https://www.adafruit.com/products/3386
|
||||||
|
image: adafruit-pi-rtc.png
|
||||||
|
pincount: 6
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: PCF8523
|
||||||
|
device: PCF8523
|
||||||
|
-->
|
||||||
|
#Adafruit PiRTC
|
||||||
|
|
||||||
|
This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support.
|
||||||
|
|
||||||
|
This RTC will keep the time for about 5 years. The PCF8523 is simple and inexpensive but not a high precision device. It may lose or gain a second or two per day.
|
72
src/fr/translate/adafruit-rgb-matrix-hat.md
Normal file
@ -0,0 +1,72 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit RGB Matrix HAT + RTC
|
||||||
|
class: board
|
||||||
|
type: LED
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run large HUB75 matrices of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2345
|
||||||
|
image: adafruit-rgb-matrix-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: I2C
|
||||||
|
'5':
|
||||||
|
mode: I2C
|
||||||
|
'29':
|
||||||
|
'33':
|
||||||
|
'31':
|
||||||
|
'32':
|
||||||
|
'36':
|
||||||
|
'16':
|
||||||
|
'7':
|
||||||
|
'11':
|
||||||
|
'40':
|
||||||
|
'15':
|
||||||
|
'37':
|
||||||
|
'13':
|
||||||
|
'38':
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: DS1307
|
||||||
|
device: DS1307
|
||||||
|
-->
|
||||||
|
#Adafruit RGB Matrix HAT + RTC
|
||||||
|
|
||||||
|
This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.
|
||||||
|
|
||||||
|
Features:
|
||||||
|
|
||||||
|
Simple design - plug in power, plug in IDC cable, run our Python code!
|
||||||
|
Power protection circuitry - you can plug a 5V 4A wall adapter into the HAT and it will automatically protect against negative, over or under-voltages! Yay for no accidental destruction of your setup.
|
||||||
|
Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving
|
||||||
|
DS1307 Real Time Clock can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install python-dev python-imaging
|
||||||
|
wget https://github.com/adafruit/rpi-rgb-led-matrix/archive/master.zip
|
||||||
|
unzip master.zip
|
||||||
|
cd rpi-rgb-led-matrix-master/
|
||||||
|
make
|
||||||
|
```
|
||||||
|
|
62
src/fr/translate/adafruit-tft-kippah.md
Normal file
@ -0,0 +1,62 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DPI TFT Kippah
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run 40 pin TFT's of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-dpi-display-kippah-ttl-tft
|
||||||
|
buy: https://www.adafruit.com/products/2453
|
||||||
|
image: adafruit-tft-kippah.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
'5':
|
||||||
|
'7':
|
||||||
|
'29':
|
||||||
|
'31':
|
||||||
|
'26':
|
||||||
|
'24':
|
||||||
|
'21':
|
||||||
|
'19':
|
||||||
|
'23':
|
||||||
|
'32':
|
||||||
|
'33':
|
||||||
|
'8':
|
||||||
|
'10':
|
||||||
|
'36':
|
||||||
|
'11':
|
||||||
|
'12':
|
||||||
|
'35':
|
||||||
|
'38':
|
||||||
|
'40':
|
||||||
|
-->
|
||||||
|
#Adafruit DPI TFT Kippah
|
||||||
|
|
||||||
|
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.
|
||||||
|
|
||||||
|
The catch is this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.
|
||||||
|
|
||||||
|
The other catch is that this display replaces the HDMI/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two.
|
||||||
|
|
||||||
|
Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something.
|
||||||
|
|
||||||
|
Please note it is the same pinout for the touchscreen and none touchscreen version of the board.
|
||||||
|
|
||||||
|
For installation instructions please follow Asdafruits tutorial linked below
|
@ -109,3 +109,9 @@ overlays:
|
|||||||
- picade-hat
|
- picade-hat
|
||||||
- speaker-phat
|
- speaker-phat
|
||||||
- pi-cap
|
- pi-cap
|
||||||
|
- adafruit-rgb-matrix-hat
|
||||||
|
- adafruit-16x2-lcd
|
||||||
|
- adafruit-arcade-bonnet
|
||||||
|
- adafruit-motor-hat
|
||||||
|
- adafruit-pi-rtc
|
||||||
|
- adafruit-tft-kippah
|
||||||
|
45
src/it/translate/adafruit-16x2-lcd.md
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit 16x2 Character LCD
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: 16x2 Character LCD and Keypad
|
||||||
|
url: https://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/1109
|
||||||
|
image: adafruit-16x2-lcd.png
|
||||||
|
pincount: 26
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit 16x2 Character LCD
|
||||||
|
|
||||||
|
This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins.
|
||||||
|
|
||||||
|
The keypad gives you buttons to input to the display and it comes with a python library to make it super easy to program.
|
||||||
|
|
||||||
|
Note that the same pinout applies to both positive, negative and normal LCD.
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install build-essential python-dev python-smbus python-pip git
|
||||||
|
sudo pip install RPi.GPIO
|
||||||
|
git clone https://github.com/adafruit/Adafruit_Python_CharLCD.git
|
||||||
|
cd Adafruit_Python_CharLCD
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
66
src/it/translate/adafruit-arcade-bonnet.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit Arcade Bonnet
|
||||||
|
class: board
|
||||||
|
type: IO
|
||||||
|
formfactor: PHAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Connect joystick,buttons and speakers to your pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-arcade-bonnet-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/3422
|
||||||
|
image: adafruit-arcade-bonnet.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
'1':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
'25':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: I2S Clk
|
||||||
|
'35':
|
||||||
|
name: I2S FS
|
||||||
|
'40':
|
||||||
|
name: I2S Dout
|
||||||
|
i2c:
|
||||||
|
'0x26':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit Arcade Bonnet
|
||||||
|
|
||||||
|
This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here is some features!:
|
||||||
|
|
||||||
|
It is the same size as a Pi Zero, so for really compact builds, this is super small. You can use it with a Pi 2, 3, B+ or any 2x20 connector Pi.
|
||||||
|
|
||||||
|
It has JST sockets so you can plug in six arcade buttons easily.
|
||||||
|
|
||||||
|
Header breakouts for use with both clicky-type switched joysticks and...
|
||||||
|
|
||||||
|
Header breakout and converter for using analog-type joysticks or thumbsticks with potentiometers inside
|
||||||
|
|
||||||
|
A 3W speaker output that can drive 4-8 ohm speakers for when using with a TV output, HDMI display or PiTFT.
|
||||||
|
|
||||||
|
Switches are all managed with an I2C-GPIO converter with interrupt out. The converter is very fast and frees up all the pins so you can use this Bonnet with a PiTFT or any other accessory/device that uses a lot of pins!
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/arcade-bonnet.sh
|
||||||
|
sudo bash arcade-bonnet.sh
|
||||||
|
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash
|
||||||
|
```
|
60
src/it/translate/adafruit-motor-hat.md
Normal file
@ -0,0 +1,60 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DC & Stepper Motor HAT
|
||||||
|
class: board
|
||||||
|
type: Motor
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Drive 4 DC Motors or 2 Stepper Motors with a raspberry pi.
|
||||||
|
url: https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2348
|
||||||
|
image: adafruit-motor-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'17':
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: TB6612
|
||||||
|
device: TB6612
|
||||||
|
-->
|
||||||
|
#Adafruit DC & Stepper Motor HAT
|
||||||
|
|
||||||
|
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
|
||||||
|
|
||||||
|
Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two)
|
||||||
|
|
||||||
|
Specs:
|
||||||
|
|
||||||
|
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes.
|
||||||
|
|
||||||
|
Can run motors on 4.5VDC to 13.5VDC.
|
||||||
|
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
|
||||||
|
|
||||||
|
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
|
||||||
|
|
||||||
|
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
git clone https://github.com/adafruit/Adafruit-Motor-HAT-Python-Library.git
|
||||||
|
cd Adafruit-Motor-HAT-Python-Library
|
||||||
|
sudo apt-get install python-dev
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
32
src/it/translate/adafruit-pi-rtc.md
Normal file
@ -0,0 +1,32 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit PiRTC
|
||||||
|
class: board
|
||||||
|
type: RTC
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Add a simple RTC to your pi
|
||||||
|
url: https://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/set-up-and-test-i2c
|
||||||
|
buy: https://www.adafruit.com/products/3386
|
||||||
|
image: adafruit-pi-rtc.png
|
||||||
|
pincount: 6
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: PCF8523
|
||||||
|
device: PCF8523
|
||||||
|
-->
|
||||||
|
#Adafruit PiRTC
|
||||||
|
|
||||||
|
This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support.
|
||||||
|
|
||||||
|
This RTC will keep the time for about 5 years. The PCF8523 is simple and inexpensive but not a high precision device. It may lose or gain a second or two per day.
|
72
src/it/translate/adafruit-rgb-matrix-hat.md
Normal file
@ -0,0 +1,72 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit RGB Matrix HAT + RTC
|
||||||
|
class: board
|
||||||
|
type: LED
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run large HUB75 matrices of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2345
|
||||||
|
image: adafruit-rgb-matrix-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: I2C
|
||||||
|
'5':
|
||||||
|
mode: I2C
|
||||||
|
'29':
|
||||||
|
'33':
|
||||||
|
'31':
|
||||||
|
'32':
|
||||||
|
'36':
|
||||||
|
'16':
|
||||||
|
'7':
|
||||||
|
'11':
|
||||||
|
'40':
|
||||||
|
'15':
|
||||||
|
'37':
|
||||||
|
'13':
|
||||||
|
'38':
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: DS1307
|
||||||
|
device: DS1307
|
||||||
|
-->
|
||||||
|
#Adafruit RGB Matrix HAT + RTC
|
||||||
|
|
||||||
|
This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.
|
||||||
|
|
||||||
|
Features:
|
||||||
|
|
||||||
|
Simple design - plug in power, plug in IDC cable, run our Python code!
|
||||||
|
Power protection circuitry - you can plug a 5V 4A wall adapter into the HAT and it will automatically protect against negative, over or under-voltages! Yay for no accidental destruction of your setup.
|
||||||
|
Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving
|
||||||
|
DS1307 Real Time Clock can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install python-dev python-imaging
|
||||||
|
wget https://github.com/adafruit/rpi-rgb-led-matrix/archive/master.zip
|
||||||
|
unzip master.zip
|
||||||
|
cd rpi-rgb-led-matrix-master/
|
||||||
|
make
|
||||||
|
```
|
||||||
|
|
62
src/it/translate/adafruit-tft-kippah.md
Normal file
@ -0,0 +1,62 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DPI TFT Kippah
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run 40 pin TFT's of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-dpi-display-kippah-ttl-tft
|
||||||
|
buy: https://www.adafruit.com/products/2453
|
||||||
|
image: adafruit-tft-kippah.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
'5':
|
||||||
|
'7':
|
||||||
|
'29':
|
||||||
|
'31':
|
||||||
|
'26':
|
||||||
|
'24':
|
||||||
|
'21':
|
||||||
|
'19':
|
||||||
|
'23':
|
||||||
|
'32':
|
||||||
|
'33':
|
||||||
|
'8':
|
||||||
|
'10':
|
||||||
|
'36':
|
||||||
|
'11':
|
||||||
|
'12':
|
||||||
|
'35':
|
||||||
|
'38':
|
||||||
|
'40':
|
||||||
|
-->
|
||||||
|
#Adafruit DPI TFT Kippah
|
||||||
|
|
||||||
|
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.
|
||||||
|
|
||||||
|
The catch is this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.
|
||||||
|
|
||||||
|
The other catch is that this display replaces the HDMI/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two.
|
||||||
|
|
||||||
|
Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something.
|
||||||
|
|
||||||
|
Please note it is the same pinout for the touchscreen and none touchscreen version of the board.
|
||||||
|
|
||||||
|
For installation instructions please follow Asdafruits tutorial linked below
|
@ -109,3 +109,9 @@ overlays:
|
|||||||
- picade-hat
|
- picade-hat
|
||||||
- speaker-phat
|
- speaker-phat
|
||||||
- pi-cap
|
- pi-cap
|
||||||
|
- adafruit-rgb-matrix-hat
|
||||||
|
- adafruit-16x2-lcd
|
||||||
|
- adafruit-arcade-bonnet
|
||||||
|
- adafruit-motor-hat
|
||||||
|
- adafruit-pi-rtc
|
||||||
|
- adafruit-tft-kippah
|
||||||
|
45
src/tr/translate/adafruit-16x2-lcd.md
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit 16x2 Character LCD
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: 16x2 Character LCD and Keypad
|
||||||
|
url: https://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/1109
|
||||||
|
image: adafruit-16x2-lcd.png
|
||||||
|
pincount: 26
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit 16x2 Character LCD
|
||||||
|
|
||||||
|
This plate makes it easy to use a 16x2 Character LCD. Most character LCDs use lots of GPIO pins, but since this uses I2C you only need two pins.
|
||||||
|
|
||||||
|
The keypad gives you buttons to input to the display and it comes with a python library to make it super easy to program.
|
||||||
|
|
||||||
|
Note that the same pinout applies to both positive, negative and normal LCD.
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install build-essential python-dev python-smbus python-pip git
|
||||||
|
sudo pip install RPi.GPIO
|
||||||
|
git clone https://github.com/adafruit/Adafruit_Python_CharLCD.git
|
||||||
|
cd Adafruit_Python_CharLCD
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
66
src/tr/translate/adafruit-arcade-bonnet.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit Arcade Bonnet
|
||||||
|
class: board
|
||||||
|
type: IO
|
||||||
|
formfactor: PHAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Connect joystick,buttons and speakers to your pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-arcade-bonnet-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/3422
|
||||||
|
image: adafruit-arcade-bonnet.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'2':
|
||||||
|
'1':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
'25':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: I2S Clk
|
||||||
|
'35':
|
||||||
|
name: I2S FS
|
||||||
|
'40':
|
||||||
|
name: I2S Dout
|
||||||
|
i2c:
|
||||||
|
'0x26':
|
||||||
|
name: MCP23017
|
||||||
|
device: MCP23017
|
||||||
|
-->
|
||||||
|
#Adafruit Arcade Bonnet
|
||||||
|
|
||||||
|
This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here is some features!:
|
||||||
|
|
||||||
|
It is the same size as a Pi Zero, so for really compact builds, this is super small. You can use it with a Pi 2, 3, B+ or any 2x20 connector Pi.
|
||||||
|
|
||||||
|
It has JST sockets so you can plug in six arcade buttons easily.
|
||||||
|
|
||||||
|
Header breakouts for use with both clicky-type switched joysticks and...
|
||||||
|
|
||||||
|
Header breakout and converter for using analog-type joysticks or thumbsticks with potentiometers inside
|
||||||
|
|
||||||
|
A 3W speaker output that can drive 4-8 ohm speakers for when using with a TV output, HDMI display or PiTFT.
|
||||||
|
|
||||||
|
Switches are all managed with an I2C-GPIO converter with interrupt out. The converter is very fast and frees up all the pins so you can use this Bonnet with a PiTFT or any other accessory/device that uses a lot of pins!
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/arcade-bonnet.sh
|
||||||
|
sudo bash arcade-bonnet.sh
|
||||||
|
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash
|
||||||
|
```
|
60
src/tr/translate/adafruit-motor-hat.md
Normal file
@ -0,0 +1,60 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DC & Stepper Motor HAT
|
||||||
|
class: board
|
||||||
|
type: Motor
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Drive 4 DC Motors or 2 Stepper Motors with a raspberry pi.
|
||||||
|
url: https://learn.adafruit.com/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2348
|
||||||
|
image: adafruit-motor-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'17':
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x20':
|
||||||
|
name: TB6612
|
||||||
|
device: TB6612
|
||||||
|
-->
|
||||||
|
#Adafruit DC & Stepper Motor HAT
|
||||||
|
|
||||||
|
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
|
||||||
|
|
||||||
|
Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins. In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two)
|
||||||
|
|
||||||
|
Specs:
|
||||||
|
|
||||||
|
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes.
|
||||||
|
|
||||||
|
Can run motors on 4.5VDC to 13.5VDC.
|
||||||
|
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
|
||||||
|
|
||||||
|
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
|
||||||
|
|
||||||
|
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
git clone https://github.com/adafruit/Adafruit-Motor-HAT-Python-Library.git
|
||||||
|
cd Adafruit-Motor-HAT-Python-Library
|
||||||
|
sudo apt-get install python-dev
|
||||||
|
sudo python setup.py install
|
||||||
|
```
|
32
src/tr/translate/adafruit-pi-rtc.md
Normal file
@ -0,0 +1,32 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit PiRTC
|
||||||
|
class: board
|
||||||
|
type: RTC
|
||||||
|
formfactor: Custom
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Add a simple RTC to your pi
|
||||||
|
url: https://learn.adafruit.com/adding-a-real-time-clock-to-raspberry-pi/set-up-and-test-i2c
|
||||||
|
buy: https://www.adafruit.com/products/3386
|
||||||
|
image: adafruit-pi-rtc.png
|
||||||
|
pincount: 6
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: PCF8523
|
||||||
|
device: PCF8523
|
||||||
|
-->
|
||||||
|
#Adafruit PiRTC
|
||||||
|
|
||||||
|
This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support.
|
||||||
|
|
||||||
|
This RTC will keep the time for about 5 years. The PCF8523 is simple and inexpensive but not a high precision device. It may lose or gain a second or two per day.
|
72
src/tr/translate/adafruit-rgb-matrix-hat.md
Normal file
@ -0,0 +1,72 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit RGB Matrix HAT + RTC
|
||||||
|
class: board
|
||||||
|
type: LED
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run large HUB75 matrices of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi
|
||||||
|
buy: https://www.adafruit.com/products/2345
|
||||||
|
image: adafruit-rgb-matrix-hat.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: yes
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: I2C
|
||||||
|
'5':
|
||||||
|
mode: I2C
|
||||||
|
'29':
|
||||||
|
'33':
|
||||||
|
'31':
|
||||||
|
'32':
|
||||||
|
'36':
|
||||||
|
'16':
|
||||||
|
'7':
|
||||||
|
'11':
|
||||||
|
'40':
|
||||||
|
'15':
|
||||||
|
'37':
|
||||||
|
'13':
|
||||||
|
'38':
|
||||||
|
i2c:
|
||||||
|
'0x68':
|
||||||
|
name: DS1307
|
||||||
|
device: DS1307
|
||||||
|
-->
|
||||||
|
#Adafruit RGB Matrix HAT + RTC
|
||||||
|
|
||||||
|
This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those you see in the likes of Times square enabling you to create a colorful scrolling display or mini LED wall with ease. A 5V power supply is also required, not included, for powering the matrix itself. The Pi cannot do it due to the high currents. To calculate the max current of your matrix set up, multiply the width of all the chained matrix by 0.12 : A 32 pixel wide matrix needs 32*0.12 = 3.85A so pick up a 5V 4A power supply. Please note: this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.
|
||||||
|
|
||||||
|
Features:
|
||||||
|
|
||||||
|
Simple design - plug in power, plug in IDC cable, run our Python code!
|
||||||
|
Power protection circuitry - you can plug a 5V 4A wall adapter into the HAT and it will automatically protect against negative, over or under-voltages! Yay for no accidental destruction of your setup.
|
||||||
|
Onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving
|
||||||
|
DS1307 Real Time Clock can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays
|
||||||
|
|
||||||
|
To install:
|
||||||
|
|
||||||
|
```bash
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install python-dev python-imaging
|
||||||
|
wget https://github.com/adafruit/rpi-rgb-led-matrix/archive/master.zip
|
||||||
|
unzip master.zip
|
||||||
|
cd rpi-rgb-led-matrix-master/
|
||||||
|
make
|
||||||
|
```
|
||||||
|
|
62
src/tr/translate/adafruit-tft-kippah.md
Normal file
@ -0,0 +1,62 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Adafruit DPI TFT Kippah
|
||||||
|
class: board
|
||||||
|
type: Display
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: Adafruit
|
||||||
|
description: Run 40 pin TFT's of a Raspberry Pi
|
||||||
|
url: https://learn.adafruit.com/adafruit-dpi-display-kippah-ttl-tft
|
||||||
|
buy: https://www.adafruit.com/products/2453
|
||||||
|
image: adafruit-tft-kippah.png
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
'4':
|
||||||
|
'17':
|
||||||
|
ground:
|
||||||
|
'9':
|
||||||
|
'25':
|
||||||
|
'39':
|
||||||
|
'34':
|
||||||
|
'30':
|
||||||
|
'20':
|
||||||
|
'14':
|
||||||
|
'6':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
'5':
|
||||||
|
'7':
|
||||||
|
'29':
|
||||||
|
'31':
|
||||||
|
'26':
|
||||||
|
'24':
|
||||||
|
'21':
|
||||||
|
'19':
|
||||||
|
'23':
|
||||||
|
'32':
|
||||||
|
'33':
|
||||||
|
'8':
|
||||||
|
'10':
|
||||||
|
'36':
|
||||||
|
'11':
|
||||||
|
'12':
|
||||||
|
'35':
|
||||||
|
'38':
|
||||||
|
'40':
|
||||||
|
-->
|
||||||
|
#Adafruit DPI TFT Kippah
|
||||||
|
|
||||||
|
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen.
|
||||||
|
|
||||||
|
The catch is this add on board uses nearly every pin available on the Raspberry Pi and those pins are hardcoded, they cannot be moved or rearranged. The pins used are GPIO 2 through 21 inclusive. That means you don't get the UART RX/TX pins (no console cable) and you don't get the standard user I2C pins, the EEPROM I2C pins, or hardware SPI pins. You do get to use pins #22, #23, #24, #25, #26 and #27, and the USB ports are fine to use too.
|
||||||
|
|
||||||
|
The other catch is that this display replaces the HDMI/NTSC output, so you can't have the DPI HAT and HDMI working at once, nor can you 'flip' between the two.
|
||||||
|
|
||||||
|
Also, there's no PWM's available so you can't have precision backlight control unless you somehow rig up an external PWM generator with a 555 or something.
|
||||||
|
|
||||||
|
Please note it is the same pinout for the touchscreen and none touchscreen version of the board.
|
||||||
|
|
||||||
|
For installation instructions please follow Asdafruits tutorial linked below
|