file renamed

draft/overlay/adafruit-oled-bonnet.md

@@ -0,0 +1,65 @@
+
+<!--
+---
+name: OLED Bonnet
+class: board
+type: Display
+formfactor: pHAT
+manufacturer: Adafruit
+description: A 128x64 display with jostick and buttons for your Pi
+url: https://learn.adafruit.com/adafruit-128x64-oled-bonnet-for-raspberry-pi
+github: https://github.com/adafruit/Adafruit_Python_SSD1306
+buy: https://www.adafruit.com/product/3531
+image: 'adafruit-oled-bonnet.png'
+pincount: 40
+eeprom: no
+power:
+  '1':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '27':
+    name: Joystick left
+  '23':
+    name: Joystick right
+  '4':
+    name: Joystick center
+  '17':
+    name: Joystick up
+  '22':
+    name: Joystick down
+  '5':
+    name: Button A
+  '6':
+    name: Button B
+i2c:
+  '0x3c':
+    name: Display Driver
+    device: ssd1306
+-->
+# OLED Bonnet
+
+The OLED Bonnet is a simple 128x64 display for the Raspberry pi with a 5-way joystick and 2 push buttons.
+
+The 1.3" screen is made of a 128x64 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast.
+
+To install the necessary software, use the following commands:
+
+```bash
+sudo apt-get install git python-imaging python-smbus
+git clone https://github.com/adafruit/Adafruit_Python_SSD1306.git
+cd Adafruit_Python_SSD1306
+sudo python setup.py install
+```

draft/overlay/adafruit-pi-oled.md

@@ -0,0 +1,45 @@
+
+<!--
+---
+name: PiOLED
+class: board
+type: Display
+formfactor: Custom
+manufacturer: Adafruit
+description: A small 128x32 display for your Pi
+url: https://learn.adafruit.com/adafruit-pioled-128x32-mini-oled-for-raspberry-pi
+github: https://github.com/adafruit/Adafruit_Python_SSD1306
+buy: https://www.adafruit.com/product/3527
+image: 'adafruit-pi-oled.png'
+pincount: 6
+eeprom: no
+power:
+  '1':
+ground:
+  '6':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+i2c:
+  '0x3c':
+    name: Display Driver
+    device: ssd1306
+-->
+# PiOLED
+
+The PiOLED is a small 128x32 OLED display designed to sit on top of just the first six pins of the Pi’s Header. It uses I2c to communicate which means there are plenty of spare pins for buttons, LED’s and sensors.
+
+The OLED display has a very high contrast ratio leading to clear and crisp text and images and as the display produces it’s own light this also means the PiOLED is extremely low power.
+
+The display is about 1”diagonal and allows for 30FPS updates rates allowing for simple animations and the SSD1306 chipset is easily controlled using a simple python library.
+
+To install the necessary software, use the following commands:
+
+```bash
+sudo apt-get install git python-imaging python-smbus
+git clone https://github.com/adafruit/Adafruit_Python_SSD1306.git
+cd Adafruit_Python_SSD1306
+sudo python setup.py install
+```