onoffshim published

src/de/settings.yaml

@@ -132,3 +132,4 @@ overlays:
 - sixfab-gps-shield
 - sixfab-xbee-shield
 - emlid-navio2
+- onoff-shim

src/en/overlay/onoff-shim.md

@@ -0,0 +1,46 @@
+<!--
+---
+name: OnOff SHIM
+class: board
+type: power
+formfactor: Custom
+manufacturer: Pimoroni
+description: A power switch for the Raspberry Pi
+url: https://shop.pimoroni.com/products/onoff-shim
+buy: https://shop.pimoroni.com/products/onoff-shim
+image: 'onoff-shim.png'
+pincount: 12
+eeprom: no
+power:
+  '2':
+ground:
+  '6':
+  '9':
+pin:
+  '7':
+    name: Shutdown
+    mode: output
+    active: low
+  '11':
+    name: Power Button
+    mode: input
+    active: low
+-->
+# OnOff SHIM
+
+The OnOff SHIM is a convenient power switch for the Raspberry Pi. Designed to be soldered straight onto the GPIO pins of your Pi, you can use it alongside HATs and pHATs while retaining a very compact setup.
+
+To setup the daemon responsible to initiate the clean shutdown, simply run:
+
+```bash
+curl https://get.pimoroni.com/onoffshim | bash
+```
+
+Features:
+
+* 1mm thick PCB
+* can be soldered right onto the Pi header
+* corner-mounted push button for on/off
+* micro-B connector for power supply
+* red status LED
+* optional breakout pins to connect an external momentary button

src/en/settings.yaml

@@ -131,3 +131,4 @@ overlays:
 - sixfab-gps-shield
 - sixfab-xbee-shield
 - emlid-navio2
+- onoff-shim

src/es/settings.yaml

@@ -132,3 +132,4 @@ overlays:
 - sixfab-gps-shield
 - sixfab-xbee-shield
 - emlid-navio2
+- onoff-shim

src/es/translate/onoff-shim.md

@@ -0,0 +1,46 @@
+<!--
+---
+name: OnOff SHIM
+class: board
+type: power
+formfactor: Custom
+manufacturer: Pimoroni
+description: A power switch for the Raspberry Pi
+url: https://shop.pimoroni.com/products/onoff-shim
+buy: https://shop.pimoroni.com/products/onoff-shim
+image: 'onoff-shim.png'
+pincount: 12
+eeprom: no
+power:
+  '2':
+ground:
+  '6':
+  '9':
+pin:
+  '7':
+    name: Shutdown
+    mode: output
+    active: low
+  '11':
+    name: Power Button
+    mode: input
+    active: low
+-->
+# OnOff SHIM
+
+The OnOff SHIM is a convenient power switch for the Raspberry Pi. Designed to be soldered straight onto the GPIO pins of your Pi, you can use it alongside HATs and pHATs while retaining a very compact setup.
+
+To setup the daemon responsible to initiate the clean shutdown, simply run:
+
+```bash
+curl https://get.pimoroni.com/onoffshim | bash
+```
+
+Features:
+
+* 1mm thick PCB
+* can be soldered right onto the Pi header
+* corner-mounted push button for on/off
+* micro-B connector for power supply
+* red status LED
+* optional breakout pins to connect an external momentary button

src/fr/settings.yaml

@@ -132,3 +132,4 @@ overlays:
 - sixfab-gps-shield
 - sixfab-xbee-shield
 - emlid-navio2
+- onoff-shim

src/fr/translate/onoff-shim.md

@@ -0,0 +1,46 @@
+<!--
+---
+name: OnOff SHIM
+class: board
+type: power
+formfactor: Custom
+manufacturer: Pimoroni
+description: A power switch for the Raspberry Pi
+url: https://shop.pimoroni.com/products/onoff-shim
+buy: https://shop.pimoroni.com/products/onoff-shim
+image: 'onoff-shim.png'
+pincount: 12
+eeprom: no
+power:
+  '2':
+ground:
+  '6':
+  '9':
+pin:
+  '7':
+    name: Shutdown
+    mode: output
+    active: low
+  '11':
+    name: Power Button
+    mode: input
+    active: low
+-->
+# OnOff SHIM
+
+The OnOff SHIM is a convenient power switch for the Raspberry Pi. Designed to be soldered straight onto the GPIO pins of your Pi, you can use it alongside HATs and pHATs while retaining a very compact setup.
+
+To setup the daemon responsible to initiate the clean shutdown, simply run:
+
+```bash
+curl https://get.pimoroni.com/onoffshim | bash
+```
+
+Features:
+
+* 1mm thick PCB
+* can be soldered right onto the Pi header
+* corner-mounted push button for on/off
+* micro-B connector for power supply
+* red status LED
+* optional breakout pins to connect an external momentary button

src/it/settings.yaml

@@ -132,3 +132,4 @@ overlays:
 - sixfab-gps-shield
 - sixfab-xbee-shield
 - emlid-navio2
+- onoff-shim

src/it/translate/onoff-shim.md

@@ -0,0 +1,46 @@
+<!--
+---
+name: OnOff SHIM
+class: board
+type: power
+formfactor: Custom
+manufacturer: Pimoroni
+description: A power switch for the Raspberry Pi
+url: https://shop.pimoroni.com/products/onoff-shim
+buy: https://shop.pimoroni.com/products/onoff-shim
+image: 'onoff-shim.png'
+pincount: 12
+eeprom: no
+power:
+  '2':
+ground:
+  '6':
+  '9':
+pin:
+  '7':
+    name: Shutdown
+    mode: output
+    active: low
+  '11':
+    name: Power Button
+    mode: input
+    active: low
+-->
+# OnOff SHIM
+
+The OnOff SHIM is a convenient power switch for the Raspberry Pi. Designed to be soldered straight onto the GPIO pins of your Pi, you can use it alongside HATs and pHATs while retaining a very compact setup.
+
+To setup the daemon responsible to initiate the clean shutdown, simply run:
+
+```bash
+curl https://get.pimoroni.com/onoffshim | bash
+```
+
+Features:
+
+* 1mm thick PCB
+* can be soldered right onto the Pi header
+* corner-mounted push button for on/off
+* micro-B connector for power supply
+* red status LED
+* optional breakout pins to connect an external momentary button

src/tr/settings.yaml

@@ -132,3 +132,4 @@ overlays:
 - sixfab-gps-shield
 - sixfab-xbee-shield
 - emlid-navio2
+- onoff-shim

src/tr/translate/onoff-shim.md

@@ -0,0 +1,46 @@
+<!--
+---
+name: OnOff SHIM
+class: board
+type: power
+formfactor: Custom
+manufacturer: Pimoroni
+description: A power switch for the Raspberry Pi
+url: https://shop.pimoroni.com/products/onoff-shim
+buy: https://shop.pimoroni.com/products/onoff-shim
+image: 'onoff-shim.png'
+pincount: 12
+eeprom: no
+power:
+  '2':
+ground:
+  '6':
+  '9':
+pin:
+  '7':
+    name: Shutdown
+    mode: output
+    active: low
+  '11':
+    name: Power Button
+    mode: input
+    active: low
+-->
+# OnOff SHIM
+
+The OnOff SHIM is a convenient power switch for the Raspberry Pi. Designed to be soldered straight onto the GPIO pins of your Pi, you can use it alongside HATs and pHATs while retaining a very compact setup.
+
+To setup the daemon responsible to initiate the clean shutdown, simply run:
+
+```bash
+curl https://get.pimoroni.com/onoffshim | bash
+```
+
+Features:
+
+* 1mm thick PCB
+* can be soldered right onto the Pi header
+* corner-mounted push button for on/off
+* micro-B connector for power supply
+* red status LED
+* optional breakout pins to connect an external momentary button