Merge pull request #88 from abelectronicsuk/master
Added new boards from AB Electronics UK
This commit is contained in:
Philip Howard
commit
9c71158f5a
|
|
@ -0,0 +1,31 @@
|
|||
<!--
|
||||
---
|
||||
name: 1 Wire Pi Plus
|
||||
manufacturer: AB Electronics UK
|
||||
description: 1-Wire to I2C host interface
|
||||
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||
github: https://github.com/abelectronicsuk
|
||||
buy: https://www.abelectronics.co.uk/
|
||||
formfactor: Custom
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power: 3v3,5v
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
#1 Wire Pi Plus
|
||||
|
||||
The 1 Wire Pi Plus from AB Electronics UK is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 Model B computer platforms. A 5V buffered I2C port is also provided on the board.
|
||||
|
||||
The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wire® bridge device. The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices. An ESD Protection Diode is used to protect the 1 Wire Pi Plus and Raspberry Pi from electrostatic spikes on the 1-Wire® port. Connections to the 1-Wire® port can be made through the RJ-12 socket or the solder points on the PCB.
|
||||
|
||||
The Quick2wire lib from [https://github.com/quick2wire/quick2wire-python-api](https://github.com/quick2wire/quick2wire-python-api) allows easy access to the I2C port via Python.
|
||||
|
||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
<!--
|
||||
---
|
||||
name: ADC Differential Pi
|
||||
manufacturer: AB Electronics UK
|
||||
description: 8 channel Analogue to Digital Converter
|
||||
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||
github: https://github.com/abelectronicsuk
|
||||
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||
formfactor: Custom
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power: 3v3,5v
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x68':
|
||||
name: MCP3424
|
||||
device: MCP3424
|
||||
'0x69':
|
||||
name: MCP3424
|
||||
device: MCP3424
|
||||
-->
|
||||
#ADC Differential Pi
|
||||
|
||||
The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter designed to work with the Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 Model B. The ADC Differential Pi is based on two Microchip MCP3424 A/D converters each containing 4 analogue inputs. The MCP3424 is a delta-sigma A/D converter with low noise differential inputs.
|
||||
|
||||
## Features ##
|
||||
|
||||
- 8 x 18-bit differential inputs
|
||||
|
||||
- Control via the Raspberry Pi I2C port
|
||||
|
||||
- Stack up to 4 ADC Differential Pi boards on a single Raspberry Pi
|
||||
|
||||
- Jumper selectable I2C addresses
|
||||
|
||||
- Buffered 5V I2C port
|
||||
|
||||
- Based on the MCP3424 from Microchip Technologies Inc
|
||||
|
||||
- Input range of ±2.048V
|
||||
|
||||
- On-board 2.048V reference voltage (Accuracy ± 0.05%, Drift: 15 ppm/°C)
|
||||
|
||||
- On-Board Programmable Gain Amplifier (PGA): Gains of 1, 2, 4 or 8
|
||||
|
||||
- Programmable Data Rate Options:
|
||||
|
||||
- 3.75 SPS (18 bits)
|
||||
- 15 SPS (16 bits)
|
||||
- 60 SPS (14 bits)
|
||||
- 240 SPS (12 bits)
|
||||
|
||||
- One-Shot or Continuous Conversion Options
|
||||
|
||||
|
||||
We have Arduino, C, Windows 10 IOT, Python 2 and Python 3 libraries available for this expansion board. You can download all of the libraries from github at:
|
||||
|
||||
[https://github.com/abelectronicsuk/](https://github.com/abelectronicsuk/)
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
<!--
|
||||
---
|
||||
name: ADC Pi Plus
|
||||
manufacturer: AB Electronics UK
|
||||
description: 8 channel Analogue to Digital Converter
|
||||
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||
github: https://github.com/abelectronicsuk
|
||||
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||
formfactor: Custom
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power: 3v3,5v
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x68':
|
||||
name: MCP3424
|
||||
device: MCP3424
|
||||
'0x69':
|
||||
name: MCP3424
|
||||
device: MCP3424
|
||||
-->
|
||||
#ADC Pi Plus
|
||||
|
||||
The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to work with the Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 Model B. The ADC Pi Plus is based on two Microchip MCP3424 A/D converters each containing 4 analogue inputs. The MCP3424 is a delta-sigma A/D converter with low noise differential inputs.
|
||||
|
||||
## Features ##
|
||||
|
||||
- 8 x 17-bit 0 to 5V Single Ended Inputs
|
||||
|
||||
- Control via the Raspberry Pi I2C port
|
||||
|
||||
- Stack up to 4 ADC Pi Plus boards on a single Raspberry Pi
|
||||
|
||||
- Jumper selectable I2C addresses
|
||||
|
||||
- Buffered 5V I2C port
|
||||
|
||||
- Based on the MCP3424 from Microchip Technologies Inc
|
||||
|
||||
- Single Ended full-scale range of 5.0V
|
||||
|
||||
- On-board 2.048V reference voltage (Accuracy ± 0.05%, Drift: 15 ppm/°C)
|
||||
|
||||
- On-Board Programmable Gain Amplifier (PGA): Gains of 1, 2, 4 or 8
|
||||
|
||||
- Programmable Data Rate Options:
|
||||
|
||||
- 3.75 SPS (17 bits)
|
||||
- 15 SPS (15 bits)
|
||||
- 60 SPS (13 bits)
|
||||
- 240 SPS (11 bits)
|
||||
|
||||
- One-Shot or Continuous Conversion Options
|
||||
|
||||
We have Arduino, C, Windows 10 IOT, Python 2 and Python 3 libraries available for this expansion board. You can download all of the libraries from github at:
|
||||
|
||||
[https://github.com/abelectronicsuk/](https://github.com/abelectronicsuk/)
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
<!--
|
||||
---
|
||||
name: ADC Pi Zero
|
||||
manufacturer: AB Electronics UK
|
||||
description: 8 channel Analogue to Digital Converter
|
||||
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||
github: https://github.com/abelectronicsuk
|
||||
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||
formfactor: Custom
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power: 3v3,5v
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x68':
|
||||
name: MCP3424
|
||||
device: MCP3424
|
||||
'0x69':
|
||||
name: MCP3424
|
||||
device: MCP3424
|
||||
-->
|
||||
#ADC Pi Zero
|
||||
|
||||
The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to work with the Raspberry Pi Zero. The ADC Pi Zero is based on two Microchip MCP3424 A/D converters each containing 4 analogue inputs. The MCP3424 is a delta-sigma A/D converter with low noise differential inputs.
|
||||
|
||||
## Features ##
|
||||
|
||||
- 8 x 17-bit 0 to 5V Single Ended Inputs
|
||||
|
||||
- Control via the Raspberry Pi I2C port
|
||||
|
||||
- Stack up to 4 ADC Pi Zero boards on a single Raspberry Pi
|
||||
|
||||
- Jumper selectable I2C addresses
|
||||
|
||||
- Buffered 5V I2C port
|
||||
|
||||
- Based on the MCP3424 from Microchip Technologies Inc
|
||||
|
||||
- Single Ended full-scale range of 5.0V
|
||||
|
||||
- On-board 2.048V reference voltage (Accuracy ± 0.05%, Drift: 15 ppm/°C)
|
||||
|
||||
- On-Board Programmable Gain Amplifier (PGA): Gains of 1, 2, 4 or 8
|
||||
|
||||
- Programmable Data Rate Options:
|
||||
|
||||
- 3.75 SPS (17 bits)
|
||||
- 15 SPS (15 bits)
|
||||
- 60 SPS (13 bits)
|
||||
- 240 SPS (11 bits)
|
||||
|
||||
- One-Shot or Continuous Conversion Options
|
||||
|
||||
We have Arduino, C, Windows 10 IOT, Python 2 and Python 3 libraries available for this expansion board. You can download all of the libraries from github at:
|
||||
|
||||
[https://github.com/abelectronicsuk/](https://github.com/abelectronicsuk/)
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
<!--
|
||||
---
|
||||
name: IO Pi Plus
|
||||
manufacturer: AB Electronics UK
|
||||
description: 32 Channel Digital Expansion Board
|
||||
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||
github: https://github.com/abelectronicsuk
|
||||
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||
formfactor: Custom
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power: 3v3,5v
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x20':
|
||||
name: MCP23017
|
||||
device: MCP23017
|
||||
'0x21':
|
||||
name: MCP23017
|
||||
device: MCP23017
|
||||
-->
|
||||
#IO Pi Plus
|
||||
|
||||
The IO Pi Plus is a 32 channel digital expansion board designed for use on the Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 Model B computer platform. The board is based around the MCP23017 16-bit I/O expander from Microchip Technology Inc.
|
||||
|
||||
A pair of MCP23017 expanders are included on the board allowing you to connect up to 32 digital inputs or outputs to the Raspberry Pi. The IO Pi Plus Expander is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the IO Pi Plus along with other expansion boards.
|
||||
|
||||
## Features ##
|
||||
|
||||
- 32 Digital Inputs/Outputs
|
||||
- Control via the Raspberry Pi I2C port
|
||||
- Stack up to 4 IO Pi boards on a single Raspberry Pi
|
||||
- Jumper selectable I2C addresses
|
||||
- External 5V Input with isolation jumper
|
||||
- Based on the MCP23017 from Microchip Technologies Inc
|
||||
- Configurable interrupt output pins - Configurable as active-high, active-low or open-drain
|
||||
- INTA and INTB can be configured to operate independently or together
|
||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||
- Polarity Inversion register to configure the polarity of the input port data
|
||||
|
||||
We have Arduino, C, Windows 10 IOT, Python 2 and Python 3 libraries available for this expansion board. You can download all of the libraries from github at:
|
||||
|
||||
[https://github.com/abelectronicsuk/](https://github.com/abelectronicsuk/)
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
<!--
|
||||
---
|
||||
name: RTC Pi Plus
|
||||
manufacturer: AB Electronics UK
|
||||
description: Real-Time Clock Module for the Raspberry Pi
|
||||
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||
github: https://github.com/abelectronicsuk
|
||||
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||
formfactor: Custom
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power: 3v3,5v
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x68':
|
||||
name: DS1307
|
||||
device: DS1307
|
||||
-->
|
||||
#RTC Pi Plus
|
||||
|
||||
The RTC Pi Plus is a battery backed real-time clock module for the Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 Model B. It keeps track of the time while the Raspberry Pi is switched off and allows the Raspberry Pi to retrieve the current date and time from the RTC Pi Plus when it is switched back on.
|
||||
|
||||
The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the RTC Pi Plus along with other expansion boards. The RTC Pi Plus uses the DS1307 RTC real time clock and a CR2032 battery to maintain the date and time when the main system power is not available.
|
||||
|
||||
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||
|
||||
We have python 2 and 3 libraries available for this expansion board. You can download all of the libraries from github at:
|
||||
|
||||
[https://github.com/abelectronicsuk/](https://github.com/abelectronicsuk/)
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
<!--
|
||||
---
|
||||
name: Serial Pi Plus
|
||||
manufacturer: AB Electronics UK
|
||||
description: UART to RS232 Converter
|
||||
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||
github: https://github.com/abelectronicsuk
|
||||
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||
formfactor: Custom
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power: 3v3
|
||||
pin:
|
||||
'8':
|
||||
mode: UART
|
||||
'10':
|
||||
mode: UART
|
||||
-->
|
||||
#Serial Pi Plus
|
||||
|
||||
The Serial Pi Plus is a UART to RS232 serial converter for the Raspberry Pi.
|
||||
|
||||
The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232 interface. The MAX3232 IC converts the 3.3V UART port to RS232 voltages allowing communication with RS232 compatible devices over a DB9 serial cable or with the use of a null-modem cable the board allows terminal access with linux on the Raspberry Pi using a terminal application. The RS232 port can be accessed through the DB9 port or the solder points on the PCB.
|
||||
|
||||
Features
|
||||
|
||||
- RS232 Master Port.
|
||||
- Control the Raspberry Pi over RS232 or connect to external serial accessories.
|
||||
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||
|
||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||
Loading…
Reference in New Issue