From f84805fb7d7a44d0853f399b5a0844688489d923 Mon Sep 17 00:00:00 2001 From: rdmueller Date: Wed, 11 Nov 2015 21:01:19 +0100 Subject: [PATCH 1/2] next batch of translations: overlays --- src/de-DE/overlay/dots.md | 22 ++++++++++++---------- src/de-DE/overlay/explorer-hat-pro.md | 2 +- src/de-DE/overlay/i2c.md | 13 +++++++------ src/de-DE/overlay/pibrella.md | 9 +++++---- src/de-DE/overlay/piglow.md | 2 +- src/de-DE/overlay/unicorn-hat.md | 14 +++++++------- 6 files changed, 33 insertions(+), 29 deletions(-) diff --git a/src/de-DE/overlay/dots.md b/src/de-DE/overlay/dots.md index e577c39..6ccdf25 100644 --- a/src/de-DE/overlay/dots.md +++ b/src/de-DE/overlay/dots.md @@ -1,12 +1,12 @@ #Raspberry Pi Dots -###Dots is a Dot to Dot HAT board for the Raspberry Pi that lets you join-the-dots with BARE Conductive Paint! +###Dots ist eine verbinde die Punkte HAT Platine für den Raspberry Pi, auf dem Du Punkte mit leitender Farbe verbindest! -Every Dot on the Dots board is a "floating" metal contact just waiting to be pulled down to ground with a dab of paint. +Jeder Punkt auf der Dots-Platine ist ein offener Metallkontakt der darauf wartet mit der Farbe kontaktiert zu werden. + + +Um einen Punkt auszulesen setze den dazugehörigen Anschluss als Eingang und checke, ob der Kontakt hergestellt ist: -To read a Dot you should set its corresponding pin as an INPUT and make sure it's pulled up like so: ```python import RPi.GPIO as GPIO @@ -105,8 +107,8 @@ GPIO.setup(dot_pin, GPIO.IN, GPIO.PUD_UP) state = GPIO.input(dot_pin) ``` -It's good practise to only turn on the PULLUP when you actually want to read the Dot, so a method like -this is recommended for reading: +Es ist gute Praxis den Eingang nur auf PULLUP zu schalten, wenn Du den Kontakt auch lesen möchtest. +Somit ist folgender Code empfohlen: ```python def is_dot_connected(dot_pin): diff --git a/src/de-DE/overlay/explorer-hat-pro.md b/src/de-DE/overlay/explorer-hat-pro.md index b2ac149..5be19e8 100644 --- a/src/de-DE/overlay/explorer-hat-pro.md +++ b/src/de-DE/overlay/explorer-hat-pro.md @@ -108,7 +108,7 @@ sudo apt-get install python-pip sudo pip install explorer-hat ``` -Anschliessend die Libraries in Dein Python-Skript importieren und basteln: +Anschliessend die Libraries in Dein Python-Skript importieren und anfangen zu basteln: ```bash import explorerhat diff --git a/src/de-DE/overlay/i2c.md b/src/de-DE/overlay/i2c.md index 5e9e0ee..d5f5ff6 100644 --- a/src/de-DE/overlay/i2c.md +++ b/src/de-DE/overlay/i2c.md @@ -1,7 +1,7 @@ -#I2C - Inter Integrated Circuit +#I2C - Inter Integrated Circuit -The Raspberry Pi's I2C pins are an extremely useful way to talk to many different types of external peripheral; from the MCP23017 digital IO expander, to a connected ATmega. +Der I2C-Bus des Raspberry Pi ist sehr praktisch um mit vielen unterschiedlichen Bausteinen +zu kommunizieren - egal ob z.B. ein MCP23017 als digitale I/O-Erweiterung oder sogar ein ATmega. -You can verify the address of connected I2C peripherals with a simple one-liner: +Die Adresse einen angeschlossenen I2C-Bausteins kann mit einem einfachen Einzeiler überprüft werden: ```bash sudo apt-get install i2c-tools sudo i2cdetect -y 1 ``` -You can access i2c from Python using the smbus library: +Den I2C-Bus kann man von Python aus über die smbus-Library ansteuern: ```bash sudo apt-get install python-smbus ``` -And then in Python: +...und dann in Python: ```python import smbus diff --git a/src/de-DE/overlay/pibrella.md b/src/de-DE/overlay/pibrella.md index 3e2abfd..ee27a1e 100644 --- a/src/de-DE/overlay/pibrella.md +++ b/src/de-DE/overlay/pibrella.md @@ -3,7 +3,7 @@ name: Pibrella manufacturer: Pimoroni Vs Cyntech url: https://github.com/pimoroni/pibrella -description: An all-in-one light, sound, input and output add-on board. +description: eine "Alles-in-Einem" Licht, Ton, Ein- und Ausgabe Erweiterungsplatine. pincount: 26 pin: '7': @@ -61,16 +61,17 @@ pin: --> #Pibrella -The all-in-one light, sound, input and output add-on board from Pimoroni vs Cyntech uses lots of IO on the Pi but leaves both Serial and I2C free leaving plenty of room for expansion if you get creative. +Die "Alles-in-Einem" Licht, Ton, Ein- und Ausgabe Erweiterungsplatine von Pimoroni vs Cyntech +benutzt jede Menge I/O Anschlüsse des Pi aber lässt die serielle Schnittstelle und den I2C-Bus noch frei und somit viel Raum für creative Erweiterungen! -Pibrella is easy to use, first you should install the module using LXTerminal/Command Line: +Pibrella is einfach zu benutzen - einfach das entsprechende Modul über die Kommandozeile installieren: ```bash sudo apt-get install python-pip sudo pip install pibrella ``` -Then import it into your Python script and start tinkering: +... dann die Library in Dein Python-Skript importieren und anfangen zu basteln: ```bash import pibrella diff --git a/src/de-DE/overlay/piglow.md b/src/de-DE/overlay/piglow.md index 3344b8c..5936ac3 100644 --- a/src/de-DE/overlay/piglow.md +++ b/src/de-DE/overlay/piglow.md @@ -5,7 +5,7 @@ manufacturer: Pimoroni url: https://github.com/pimoroni/piglow github: https://github.com/pimoroni/piglow buy: http://shop.pimoroni.com/products/piglow -description: Simply 18 LEDs in a spiral pattern controllable in Python. +description: 18 einfache LEDs als Spirale angeordnet und über Python ansteuerbar. pincount: 26 pin: '1': {} diff --git a/src/de-DE/overlay/unicorn-hat.md b/src/de-DE/overlay/unicorn-hat.md index c3c4013..aee4e37 100644 --- a/src/de-DE/overlay/unicorn-hat.md +++ b/src/de-DE/overlay/unicorn-hat.md @@ -4,7 +4,7 @@ name: Unicorn HAT manufacturer: Pimoroni url: http://shop.pimoroni.com/products/unicorn-hat buy: http://shop.pimoroni.com/products/unicorn-hat -description: 64 blindingly bright RGB LEDs on a single HAT +description: 64 blendend helle RGB LEDs auf einem HAT github: https://github.com/pimoroni/unicornhat install: 'apt': @@ -26,19 +26,19 @@ pin: --> #Unicorn HAT -64 blindingly bright LEDs packed into a HAT and driven with an ultra-fast, C library that you can talk to -from Python make Unicorn HAT PiGlow's bigger, brighter brother. +64 blendend helle LEDs auf einem HAT, die über eine super schnelle C-Library angesteuert werden. +Die C-Library lässt sich auch über Python ansteuern. Der Unicorn HAT ist quasi der grössere und hellere Bruder der PiGlow. -Note: Unicorn HAT uses some special PWM trickery, performed with the same hardware that lets you Pi produce sound -through the audio jack ( analog audio ) so you can't use both at the same time! +Hinweis: der Unicorn HAT trickst ein wenig mit dem PWM-Ausgang - der gleichen Hardware, mit der Dein Pi Sounds über den +analogen Audio-Ausgang erzeugen kann. Somit kannst Du nicht beides gleichzeitig nutzen! -Setup is easy, just: +Die Einrichtung des HATs ist einfach: ```bash curl get.pimoroni.com/unicornhat | bash ``` -Then import it into your Python script and start tinkering: +Dann musst Du die Library nur noch in Dein Python-Skript importieren und kannst anfangen zu experimentieren: ```bash import unicornhat From cead81e33913158ebae12f67ef45fa743f513861 Mon Sep 17 00:00:00 2001 From: rdmueller Date: Wed, 11 Nov 2015 21:15:25 +0100 Subject: [PATCH 2/2] ...and another batch of translations --- src/de-DE/overlay/display-o-tron-hat.md | 10 +++++----- src/de-DE/overlay/display-o-tron.md | 16 ++++++++-------- src/de-DE/overlay/piano-hat.md | 10 +++++----- src/de-DE/overlay/skywriter-hat.md | 8 ++++---- 4 files changed, 22 insertions(+), 22 deletions(-) diff --git a/src/de-DE/overlay/display-o-tron-hat.md b/src/de-DE/overlay/display-o-tron-hat.md index c875db2..110cce0 100644 --- a/src/de-DE/overlay/display-o-tron-hat.md +++ b/src/de-DE/overlay/display-o-tron-hat.md @@ -3,7 +3,7 @@ name: Display-o-Tron HAT manufacturer: Pimoroni url: https://github.com/pimoroni/dot3k -description: A 3-line character LCD with a 6-zone RGB backlight and 6 touch buttons +description: Ein 3-zeiliges LCD mit einer 6-Zonen RGB Hintergrundbeleuchtung und 6 Tasten pincount: 40 pin: 3: @@ -32,13 +32,13 @@ pin: --> #Display-o-Tron HAT -Display-o-Tron HAT uses both SPI and I2c to drive the LCD display, backlight and touch. -However both of these busses can be shared with other devices. +Der Display-o-Tron HAT benutzt den SPI- und I2C-Bus um das LC-Display, die Hintergrundbeleuchtung und die Tasten zu steuern bzw. abzufragen. +Beide Busse können aber weiterhin noch mit anderen Komponenten genutzt werden. -You can use the one-line product installer to get Display-o-Tron HAT set up and ready to go, just: +Mit diesem Einzeiler installierst Du den Display-o-Tron HAT: ```bash curl get.pimoroni.com/dot3k | bash ``` -And follow the instructions! +...den Rest findest Du in der Anleitung auf Github :-) diff --git a/src/de-DE/overlay/display-o-tron.md b/src/de-DE/overlay/display-o-tron.md index b0fbac9..c16f313 100644 --- a/src/de-DE/overlay/display-o-tron.md +++ b/src/de-DE/overlay/display-o-tron.md @@ -4,7 +4,7 @@ name: Display-o-Tron 3000 manufacturer: Pimoroni github: https://github.com/pimoroni/dot3k url: https://github.com/pimoroni/dot3k -description: A 3-line character LCD with an RGB backlight and joystick +description: Ein 3-zeiliges LCD mit RGB Hintergrundbeleuchtung und Joystick install: 'devices': - 'i2c' @@ -24,25 +24,25 @@ pin: 5: mode: i2c 7: - name: Joystick Button + name: Joystick Taste mode: input active: low 11: - name: Joystick Left + name: Joystick links mode: input active: low 13: - name: Joystick Up + name: Joystick oben mode: input active: low 15: - name: Joystick Right + name: Joystick rechts mode: input active: low 19: mode: spi 21: - name: Joystick Down + name: Joystick unten mode: input active: low 22: @@ -54,10 +54,10 @@ pin: --> #Display-o-Tron 3000 -You can use the one-line product installer to get Display-o-Tron 3000 set up and ready to go, just: +Mit diesem Einzeiler installierst Du das Display-o-Tron 3000: ```bash curl get.pimoroni.com/dot3k | bash ``` -And follow the instructions! +...den Rest findest Du in der Anleitung auf Github :-) diff --git a/src/de-DE/overlay/piano-hat.md b/src/de-DE/overlay/piano-hat.md index 2e274a8..6892a0e 100644 --- a/src/de-DE/overlay/piano-hat.md +++ b/src/de-DE/overlay/piano-hat.md @@ -3,7 +3,7 @@ name: Piano HAT manufacturer: Pimoroni url: https://github.com/pimoroni/piano-hat -description: A tiny Pi piano with 16 touch-sensitive buttons +description: Ein kleines Pi Piano mit 16 berührungsempfindlichen Tasten pincount: 40 i2c: '0x28': @@ -34,14 +34,14 @@ pin: --> #Piano HAT -Piano HAT has 16 touch-sensitive buttons. 13 of these are a single Piano octave, the rest give you octave up/down and instrument select functionality. +Piano HAT hat 16 berührungsempfindliche Tasten. 13 dieser Tasten bilden eine Piano-Oktave, die anderen lassen die die Oktave hoch oder runter schalten und Instrumente auswählen. -It uses two Microchip CAP1188 chips with the i2c addresses 0x28 and 0x2b. +Der HAT benutzt zwei Microchip CAP1188 ICs mit den I2C Adressen 0x28 und 0x2b. -You can use the one-line product installer to get Piano HAT set up and ready to go, just: +Mit folgendem Einzeiler installierst Du die nötige Software: ```bash curl get.pimoroni.com/pianohat | bash ``` -And follow the instructions! +Den Rest findest Du in der Anleitung! diff --git a/src/de-DE/overlay/skywriter-hat.md b/src/de-DE/overlay/skywriter-hat.md index f6f3e7d..666371a 100644 --- a/src/de-DE/overlay/skywriter-hat.md +++ b/src/de-DE/overlay/skywriter-hat.md @@ -5,7 +5,7 @@ manufacturer: Pimoroni url: https://github.com/pimoroni/skywriter-hat github: https://github.com/pimoroni/skywriter-hat buy: http://shop.pimoroni.com/products/skywriter-hat -description: A 3D positional and gesture sensor. +description: Ein 3D Positions- und Gesten-Sensor. install: 'apt': - 'python-smbus' @@ -28,7 +28,7 @@ pin: --> #Skywriter HAT -Skywriter HAT senses your finger's position above it in 3 dimensions, outputting an X, Y, Z axis -which you can use in your Python scripts. +Skywriter HAT spürt die Position Deines Fingers über ihm in drei Dimensionen und gibt die somit die X-, Y- und Z-Koordinaten, welche Du in Deinen Python-Skripten verarbeiten kannst. + +Er erkennt auch Gesten wie z.B. wischen und andere. -It also recognises gestures, including swipes and more.