Update mdb2pi-hat.md
This commit is contained in:
parent
481b3e32bd
commit
a185bd1c9d
@ -41,7 +41,7 @@ i2c:
|
|||||||
-->
|
-->
|
||||||
#MDB2Pi HAT
|
#MDB2Pi HAT
|
||||||
|
|
||||||
The MDB2Pi HAT can serve as an MDB master or as a peripheral MDB Device for Vending Machines (VMC). It takes care of the MDB specific 9-bit format, electrical and timing constraints. It forwards the MDB payload to the Raspberry Pi UART using a simple serial protocol.
|
The MDB2Pi HAT can serve as a MDB master or as a peripheral MDB Device for Vending Machines (VMC). It takes care of the MDB specific 9-bit format, electrical and timing constraints. It forwards the MDB payload to the Raspberry Pi UART using a simple serial protocol.
|
||||||
The MDB2Pi HAT is powered from the MDB bus (10...42V regulated or unregulated supply) and backpowers the Raspberry Pi with up to 2.5A@5V. Thus no separate power supply is required for the pi.
|
The MDB2Pi HAT is powered from the MDB bus (10...42V regulated or unregulated supply) and backpowers the Raspberry Pi with up to 2.5A@5V. Thus no separate power supply is required for the pi.
|
||||||
|
|
||||||
##Configuration
|
##Configuration
|
||||||
@ -51,13 +51,14 @@ enable_uart=1
|
|||||||
dtparam=i2c_vc=on
|
dtparam=i2c_vc=on
|
||||||
```
|
```
|
||||||
|
|
||||||
2. disable serial console output by editing :
|
2. disable serial console output:
|
||||||
```bash
|
```bash
|
||||||
sudo nano /boot/cmdline.txt
|
sudo nano /boot/cmdline.txt
|
||||||
```
|
```
|
||||||
--> remove the "console=..." parameter
|
--> remove the "console=..." parameter
|
||||||
|
|
||||||
##MDB Master and Cashless Device Demo:
|
##MDB Master and Cashless Device Demo:
|
||||||
|
Prerequisites:
|
||||||
1. Install mono runtime:
|
1. Install mono runtime:
|
||||||
```bash
|
```bash
|
||||||
sudo apt-get install mono-runtime
|
sudo apt-get install mono-runtime
|
||||||
|
Loading…
Reference in New Issue
Block a user