diff --git a/draft/boards/pitop-pulse.png b/resources/boards/pitop-pulse.png
similarity index 100%
rename from draft/boards/pitop-pulse.png
rename to resources/boards/pitop-pulse.png
diff --git a/src/de/settings.yaml b/src/de/settings.yaml
index 1bfbffb..036e14c 100644
--- a/src/de/settings.yaml
+++ b/src/de/settings.yaml
@@ -138,3 +138,4 @@ overlays:
 - voice-hat
 - inkyphat
 - gertvga-666
+- pitop-pulse
diff --git a/draft/overlay/pitop-pulse.md b/src/de/translate/pitop-pulse.md
similarity index 100%
rename from draft/overlay/pitop-pulse.md
rename to src/de/translate/pitop-pulse.md
diff --git a/src/en/overlay/pitop-pulse.md b/src/en/overlay/pitop-pulse.md
new file mode 100644
index 0000000..daff0ec
--- /dev/null
+++ b/src/en/overlay/pitop-pulse.md
@@ -0,0 +1,62 @@
+<!--
+---
+name: pi-topPULSE
+class: board
+type: audio,io,led,sensor,multi
+formfactor: HAT
+manufacturer: pi-top
+description: 7×7 RGB LED matrix, speaker and microphone
+url: http://pi-top.com/products/pulse
+github: https://github.com/pi-top/pi-topPULSE
+buy: http://pi-top.com/products/pulse
+image: 'pitop-pulse.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '8':
+    mode: uart
+  '10':
+    mode: uart
+  '12':
+    name: BCKL
+    mode: i2s
+  '35':
+    name: LRCK
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+i2c:
+  '0x24':
+    name: Feature-enable IC
+    device: pca9570
+install:
+  'devices':
+    - 'i2s'
+    - 'i2c'
+  'apt':
+    - 'pt-pulse'
+    - 'python-pt-pulse'
+    - 'python3-pt-pulse'
+-->
+#pi-topPULSE
+
+The pi-topPULSE is a Raspberry Pi HAT and a pi-top/pi-topCEED compatible add-on board comprising of a 7x7 LED array, a speaker and a microphone. Additionally the device features ambient lights: 4 around the speaker, and 3 on the underside.
+
+The speaker uses I2S, and the LEDs and microphone use serial (UART) - Tx and Rx respectively. A PCA9570 IC is exposed at I2C address 0x24, which allows for enabling/disabling/probing the on-board speaker, MCU and EEPROM as well as toggling the microphone sampling rate between 16KHz and 22KHz.
diff --git a/src/en/settings.yaml b/src/en/settings.yaml
index 6be32d6..99919f3 100644
--- a/src/en/settings.yaml
+++ b/src/en/settings.yaml
@@ -137,3 +137,4 @@ overlays:
 - zeroseg
 - inkyphat
 - gertvga-666
+- pitop-pulse
diff --git a/src/es/settings.yaml b/src/es/settings.yaml
index 91b475c..0785188 100644
--- a/src/es/settings.yaml
+++ b/src/es/settings.yaml
@@ -137,3 +137,4 @@ overlays:
 - voice-hat
 - inkyphat
 - gertvga-666
+- pitop-pulse
diff --git a/src/es/translate/pitop-pulse.md b/src/es/translate/pitop-pulse.md
new file mode 100644
index 0000000..daff0ec
--- /dev/null
+++ b/src/es/translate/pitop-pulse.md
@@ -0,0 +1,62 @@
+<!--
+---
+name: pi-topPULSE
+class: board
+type: audio,io,led,sensor,multi
+formfactor: HAT
+manufacturer: pi-top
+description: 7×7 RGB LED matrix, speaker and microphone
+url: http://pi-top.com/products/pulse
+github: https://github.com/pi-top/pi-topPULSE
+buy: http://pi-top.com/products/pulse
+image: 'pitop-pulse.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '8':
+    mode: uart
+  '10':
+    mode: uart
+  '12':
+    name: BCKL
+    mode: i2s
+  '35':
+    name: LRCK
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+i2c:
+  '0x24':
+    name: Feature-enable IC
+    device: pca9570
+install:
+  'devices':
+    - 'i2s'
+    - 'i2c'
+  'apt':
+    - 'pt-pulse'
+    - 'python-pt-pulse'
+    - 'python3-pt-pulse'
+-->
+#pi-topPULSE
+
+The pi-topPULSE is a Raspberry Pi HAT and a pi-top/pi-topCEED compatible add-on board comprising of a 7x7 LED array, a speaker and a microphone. Additionally the device features ambient lights: 4 around the speaker, and 3 on the underside.
+
+The speaker uses I2S, and the LEDs and microphone use serial (UART) - Tx and Rx respectively. A PCA9570 IC is exposed at I2C address 0x24, which allows for enabling/disabling/probing the on-board speaker, MCU and EEPROM as well as toggling the microphone sampling rate between 16KHz and 22KHz.
diff --git a/src/fr/settings.yaml b/src/fr/settings.yaml
index d7eb3f1..2c20af0 100644
--- a/src/fr/settings.yaml
+++ b/src/fr/settings.yaml
@@ -138,3 +138,4 @@ overlays:
 - voice-hat
 - inkyphat
 - gertvga-666
+- pitop-pulse
diff --git a/src/fr/translate/pitop-pulse.md b/src/fr/translate/pitop-pulse.md
new file mode 100644
index 0000000..daff0ec
--- /dev/null
+++ b/src/fr/translate/pitop-pulse.md
@@ -0,0 +1,62 @@
+<!--
+---
+name: pi-topPULSE
+class: board
+type: audio,io,led,sensor,multi
+formfactor: HAT
+manufacturer: pi-top
+description: 7×7 RGB LED matrix, speaker and microphone
+url: http://pi-top.com/products/pulse
+github: https://github.com/pi-top/pi-topPULSE
+buy: http://pi-top.com/products/pulse
+image: 'pitop-pulse.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '8':
+    mode: uart
+  '10':
+    mode: uart
+  '12':
+    name: BCKL
+    mode: i2s
+  '35':
+    name: LRCK
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+i2c:
+  '0x24':
+    name: Feature-enable IC
+    device: pca9570
+install:
+  'devices':
+    - 'i2s'
+    - 'i2c'
+  'apt':
+    - 'pt-pulse'
+    - 'python-pt-pulse'
+    - 'python3-pt-pulse'
+-->
+#pi-topPULSE
+
+The pi-topPULSE is a Raspberry Pi HAT and a pi-top/pi-topCEED compatible add-on board comprising of a 7x7 LED array, a speaker and a microphone. Additionally the device features ambient lights: 4 around the speaker, and 3 on the underside.
+
+The speaker uses I2S, and the LEDs and microphone use serial (UART) - Tx and Rx respectively. A PCA9570 IC is exposed at I2C address 0x24, which allows for enabling/disabling/probing the on-board speaker, MCU and EEPROM as well as toggling the microphone sampling rate between 16KHz and 22KHz.
diff --git a/src/it/settings.yaml b/src/it/settings.yaml
index 25680e5..8637e9a 100644
--- a/src/it/settings.yaml
+++ b/src/it/settings.yaml
@@ -138,3 +138,4 @@ overlays:
 - voice-hat
 - inkyphat
 - gertvga-666
+- pitop-pulse
diff --git a/src/it/translate/pitop-pulse.md b/src/it/translate/pitop-pulse.md
new file mode 100644
index 0000000..daff0ec
--- /dev/null
+++ b/src/it/translate/pitop-pulse.md
@@ -0,0 +1,62 @@
+<!--
+---
+name: pi-topPULSE
+class: board
+type: audio,io,led,sensor,multi
+formfactor: HAT
+manufacturer: pi-top
+description: 7×7 RGB LED matrix, speaker and microphone
+url: http://pi-top.com/products/pulse
+github: https://github.com/pi-top/pi-topPULSE
+buy: http://pi-top.com/products/pulse
+image: 'pitop-pulse.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '8':
+    mode: uart
+  '10':
+    mode: uart
+  '12':
+    name: BCKL
+    mode: i2s
+  '35':
+    name: LRCK
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+i2c:
+  '0x24':
+    name: Feature-enable IC
+    device: pca9570
+install:
+  'devices':
+    - 'i2s'
+    - 'i2c'
+  'apt':
+    - 'pt-pulse'
+    - 'python-pt-pulse'
+    - 'python3-pt-pulse'
+-->
+#pi-topPULSE
+
+The pi-topPULSE is a Raspberry Pi HAT and a pi-top/pi-topCEED compatible add-on board comprising of a 7x7 LED array, a speaker and a microphone. Additionally the device features ambient lights: 4 around the speaker, and 3 on the underside.
+
+The speaker uses I2S, and the LEDs and microphone use serial (UART) - Tx and Rx respectively. A PCA9570 IC is exposed at I2C address 0x24, which allows for enabling/disabling/probing the on-board speaker, MCU and EEPROM as well as toggling the microphone sampling rate between 16KHz and 22KHz.
diff --git a/src/tr/settings.yaml b/src/tr/settings.yaml
index 5a60c6c..fb21c41 100644
--- a/src/tr/settings.yaml
+++ b/src/tr/settings.yaml
@@ -138,3 +138,4 @@ overlays:
 - voice-hat
 - inkyphat
 - gertvga-666
+- pitop-pulse
diff --git a/src/tr/translate/pitop-pulse.md b/src/tr/translate/pitop-pulse.md
new file mode 100644
index 0000000..daff0ec
--- /dev/null
+++ b/src/tr/translate/pitop-pulse.md
@@ -0,0 +1,62 @@
+<!--
+---
+name: pi-topPULSE
+class: board
+type: audio,io,led,sensor,multi
+formfactor: HAT
+manufacturer: pi-top
+description: 7×7 RGB LED matrix, speaker and microphone
+url: http://pi-top.com/products/pulse
+github: https://github.com/pi-top/pi-topPULSE
+buy: http://pi-top.com/products/pulse
+image: 'pitop-pulse.png'
+pincount: 40
+eeprom: yes
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+  '8':
+    mode: uart
+  '10':
+    mode: uart
+  '12':
+    name: BCKL
+    mode: i2s
+  '35':
+    name: LRCK
+    mode: i2s
+  '40':
+    name: DOUT
+    mode: i2s
+i2c:
+  '0x24':
+    name: Feature-enable IC
+    device: pca9570
+install:
+  'devices':
+    - 'i2s'
+    - 'i2c'
+  'apt':
+    - 'pt-pulse'
+    - 'python-pt-pulse'
+    - 'python3-pt-pulse'
+-->
+#pi-topPULSE
+
+The pi-topPULSE is a Raspberry Pi HAT and a pi-top/pi-topCEED compatible add-on board comprising of a 7x7 LED array, a speaker and a microphone. Additionally the device features ambient lights: 4 around the speaker, and 3 on the underside.
+
+The speaker uses I2S, and the LEDs and microphone use serial (UART) - Tx and Rx respectively. A PCA9570 IC is exposed at I2C address 0x24, which allows for enabling/disabling/probing the on-board speaker, MCU and EEPROM as well as toggling the microphone sampling rate between 16KHz and 22KHz.