ab-1-wire-plus part1

src/fr/overlay/ab-1-wire-plus.md

@@ -0,0 +1,45 @@
+<!--
+---
+name: 1 Wire Pi Plus
+class: board
+type: COM
+formfactor: HAT
+manufacturer: AB Electronics
+description: 1-Wire vers interface I2C
+url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
+github: https://github.com/abelectronicsuk
+buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
+image: 'ab-1-wire-pi-plus.png'
+pincount: 40
+eeprom: no
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+i2c:
+  '0x18':
+    name: DS2482
+    device: DS2482-100
+-->
+#1 Wire Pi Plus
+
+Le **1 Wire Pi Plus** de **AB Electronics UK** est une carte chapeau de communication supportant le protocole **1-Wire®** et conçu pour une utilisation avec le Raspberry Pi. Un port I2C 5v est aussi disponible sur la carte.
+
+The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wire® bridge device.  The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices.  An ESD Protection Diode is used to protect the 1 Wire Pi Plus and Raspberry Pi from electrostatic spikes on the 1-Wire® port.  Connections to the 1-Wire® port can be made through the RJ-12 socket or the solder points on the PCB.
+
+I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
+
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")