added GertVGA-666 based on francesco-vannini's submission
This commit is contained in:
parent
885f56133e
commit
c348f8f69b
Binary file not shown.
After Width: | Height: | Size: 51 KiB |
|
@ -137,3 +137,4 @@ overlays:
|
|||
- unicorn-hat-hd
|
||||
- voice-hat
|
||||
- inkyphat
|
||||
- gertvga-666
|
||||
|
|
|
@ -0,0 +1,74 @@
|
|||
<!--
|
||||
---
|
||||
name: GertVGA 666
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: Pi Supply
|
||||
description: The Gert VGA 666 is a breakout/add on board for the Raspberry Pi for using a VGA monitor.
|
||||
url: https://www.kickstarter.com/projects/pisupply/gert-vga-666-kit-hardware-vga-for-raspberry-pi
|
||||
github: https://github.com/PiSupply/Gert-VGA-666
|
||||
schematic: https://github.com/fenlogic/vga666/blob/master/documents/vga_manual.pdf
|
||||
buy: https://www.pi-supply.com/product/gert-vga-666-hardware-vga-raspberry-pi/
|
||||
image: 'gertvga-666.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
name: V-SYNC
|
||||
'5':
|
||||
name: H-SYNC
|
||||
'7':
|
||||
name: Blue 2
|
||||
'8':
|
||||
name: Green 6
|
||||
'10':
|
||||
name: Green 7
|
||||
'11':
|
||||
name: Red 3
|
||||
'12':
|
||||
name: Red 4
|
||||
'19':
|
||||
name: Green 2
|
||||
'21':
|
||||
name: Blue 7
|
||||
'23':
|
||||
name: Green 3
|
||||
'24':
|
||||
name: Blue 6
|
||||
'26':
|
||||
name: Blue 5
|
||||
'29':
|
||||
name: Blue 3
|
||||
'31':
|
||||
name: Blue 4
|
||||
'32':
|
||||
name: Green 4
|
||||
'33':
|
||||
name: Green 5
|
||||
'35':
|
||||
name: Red 5
|
||||
'36':
|
||||
name: Red 2
|
||||
'38':
|
||||
name: Red 6
|
||||
'40':
|
||||
name: Red 7
|
||||
-->
|
||||
# GertVGA 666
|
||||
|
||||
The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi. It is an open source hardware design released publicly by Gert van Loo.
|
||||
|
||||
It is a neat and very useful solution for using a VGA screen/monitor with your Raspberry Pi and is far cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (using a parallel interface) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080p60 VGA video with no CPU load.
|
|
@ -31,8 +31,18 @@ Alternatively you can enable the one-wire interface on demand using raspi-config
|
|||
sudo modprobe w1-gpio
|
||||
```
|
||||
|
||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||
Newer kernels (4.9.28 and later) allow you to use dynamic overlay loading instead, including creating multiple 1-Wire busses to be used at the same time:
|
||||
|
||||
```
|
||||
sudo dtoverlay w1-gpio gpiopin=4 pullup=0 # header pin 7
|
||||
sudo dtoverlay w1-gpio gpiopin=17 pullup=0 # header pin 11
|
||||
sudo dtoverlay w1-gpio gpiopin=27 pullup=0 # header pin 13
|
||||
```
|
||||
|
||||
once any of the steps above have been performed, and discovery is complete you can list the devices that your Raspberry Pi has discovered via all 1-Wire busses (by default BCM4), like so:
|
||||
|
||||
```
|
||||
ls /sys/bus/w1/devices/
|
||||
```
|
||||
|
||||
n.b. Using w1-gpio on the Raspberry Pi typically needs a 4.7 kΩ pull-up resistor connected between the GPIO pin and a 3.3v supply (e.g. header pin 1 or 17). Other means of connecting 1-Wire devices to the Raspberry Pi are also possible, such as using i2c to 1-Wire bridge chips.
|
||||
|
|
|
@ -0,0 +1,74 @@
|
|||
<!--
|
||||
---
|
||||
name: GertVGA 666
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: Pi Supply
|
||||
description: The Gert VGA 666 is a breakout/add on board for the Raspberry Pi for using a VGA monitor.
|
||||
url: https://www.kickstarter.com/projects/pisupply/gert-vga-666-kit-hardware-vga-for-raspberry-pi
|
||||
github: https://github.com/PiSupply/Gert-VGA-666
|
||||
schematic: https://github.com/fenlogic/vga666/blob/master/documents/vga_manual.pdf
|
||||
buy: https://www.pi-supply.com/product/gert-vga-666-hardware-vga-raspberry-pi/
|
||||
image: 'gertvga-666.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
name: V-SYNC
|
||||
'5':
|
||||
name: H-SYNC
|
||||
'7':
|
||||
name: Blue 2
|
||||
'8':
|
||||
name: Green 6
|
||||
'10':
|
||||
name: Green 7
|
||||
'11':
|
||||
name: Red 3
|
||||
'12':
|
||||
name: Red 4
|
||||
'19':
|
||||
name: Green 2
|
||||
'21':
|
||||
name: Blue 7
|
||||
'23':
|
||||
name: Green 3
|
||||
'24':
|
||||
name: Blue 6
|
||||
'26':
|
||||
name: Blue 5
|
||||
'29':
|
||||
name: Blue 3
|
||||
'31':
|
||||
name: Blue 4
|
||||
'32':
|
||||
name: Green 4
|
||||
'33':
|
||||
name: Green 5
|
||||
'35':
|
||||
name: Red 5
|
||||
'36':
|
||||
name: Red 2
|
||||
'38':
|
||||
name: Red 6
|
||||
'40':
|
||||
name: Red 7
|
||||
-->
|
||||
# GertVGA 666
|
||||
|
||||
The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi. It is an open source hardware design released publicly by Gert van Loo.
|
||||
|
||||
It is a neat and very useful solution for using a VGA screen/monitor with your Raspberry Pi and is far cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (using a parallel interface) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080p60 VGA video with no CPU load.
|
|
@ -136,3 +136,4 @@ overlays:
|
|||
- zero-lipo
|
||||
- zeroseg
|
||||
- inkyphat
|
||||
- gertvga-666
|
||||
|
|
|
@ -137,3 +137,4 @@ overlays:
|
|||
- unicorn-hat-hd
|
||||
- voice-hat
|
||||
- inkyphat
|
||||
- gertvga-666
|
||||
|
|
|
@ -0,0 +1,74 @@
|
|||
<!--
|
||||
---
|
||||
name: GertVGA 666
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: Pi Supply
|
||||
description: The Gert VGA 666 is a breakout/add on board for the Raspberry Pi for using a VGA monitor.
|
||||
url: https://www.kickstarter.com/projects/pisupply/gert-vga-666-kit-hardware-vga-for-raspberry-pi
|
||||
github: https://github.com/PiSupply/Gert-VGA-666
|
||||
schematic: https://github.com/fenlogic/vga666/blob/master/documents/vga_manual.pdf
|
||||
buy: https://www.pi-supply.com/product/gert-vga-666-hardware-vga-raspberry-pi/
|
||||
image: 'gertvga-666.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
name: V-SYNC
|
||||
'5':
|
||||
name: H-SYNC
|
||||
'7':
|
||||
name: Blue 2
|
||||
'8':
|
||||
name: Green 6
|
||||
'10':
|
||||
name: Green 7
|
||||
'11':
|
||||
name: Red 3
|
||||
'12':
|
||||
name: Red 4
|
||||
'19':
|
||||
name: Green 2
|
||||
'21':
|
||||
name: Blue 7
|
||||
'23':
|
||||
name: Green 3
|
||||
'24':
|
||||
name: Blue 6
|
||||
'26':
|
||||
name: Blue 5
|
||||
'29':
|
||||
name: Blue 3
|
||||
'31':
|
||||
name: Blue 4
|
||||
'32':
|
||||
name: Green 4
|
||||
'33':
|
||||
name: Green 5
|
||||
'35':
|
||||
name: Red 5
|
||||
'36':
|
||||
name: Red 2
|
||||
'38':
|
||||
name: Red 6
|
||||
'40':
|
||||
name: Red 7
|
||||
-->
|
||||
# GertVGA 666
|
||||
|
||||
The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi. It is an open source hardware design released publicly by Gert van Loo.
|
||||
|
||||
It is a neat and very useful solution for using a VGA screen/monitor with your Raspberry Pi and is far cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (using a parallel interface) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080p60 VGA video with no CPU load.
|
|
@ -137,3 +137,4 @@ overlays:
|
|||
- unicorn-hat-hd
|
||||
- voice-hat
|
||||
- inkyphat
|
||||
- gertvga-666
|
||||
|
|
|
@ -0,0 +1,74 @@
|
|||
<!--
|
||||
---
|
||||
name: GertVGA 666
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: Pi Supply
|
||||
description: The Gert VGA 666 is a breakout/add on board for the Raspberry Pi for using a VGA monitor.
|
||||
url: https://www.kickstarter.com/projects/pisupply/gert-vga-666-kit-hardware-vga-for-raspberry-pi
|
||||
github: https://github.com/PiSupply/Gert-VGA-666
|
||||
schematic: https://github.com/fenlogic/vga666/blob/master/documents/vga_manual.pdf
|
||||
buy: https://www.pi-supply.com/product/gert-vga-666-hardware-vga-raspberry-pi/
|
||||
image: 'gertvga-666.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
name: V-SYNC
|
||||
'5':
|
||||
name: H-SYNC
|
||||
'7':
|
||||
name: Blue 2
|
||||
'8':
|
||||
name: Green 6
|
||||
'10':
|
||||
name: Green 7
|
||||
'11':
|
||||
name: Red 3
|
||||
'12':
|
||||
name: Red 4
|
||||
'19':
|
||||
name: Green 2
|
||||
'21':
|
||||
name: Blue 7
|
||||
'23':
|
||||
name: Green 3
|
||||
'24':
|
||||
name: Blue 6
|
||||
'26':
|
||||
name: Blue 5
|
||||
'29':
|
||||
name: Blue 3
|
||||
'31':
|
||||
name: Blue 4
|
||||
'32':
|
||||
name: Green 4
|
||||
'33':
|
||||
name: Green 5
|
||||
'35':
|
||||
name: Red 5
|
||||
'36':
|
||||
name: Red 2
|
||||
'38':
|
||||
name: Red 6
|
||||
'40':
|
||||
name: Red 7
|
||||
-->
|
||||
# GertVGA 666
|
||||
|
||||
The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi. It is an open source hardware design released publicly by Gert van Loo.
|
||||
|
||||
It is a neat and very useful solution for using a VGA screen/monitor with your Raspberry Pi and is far cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (using a parallel interface) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080p60 VGA video with no CPU load.
|
|
@ -31,8 +31,18 @@ Alternatively you can enable the one-wire interface on demand using raspi-config
|
|||
sudo modprobe w1-gpio
|
||||
```
|
||||
|
||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||
Newer kernels (4.9.28 and later) allow you to use dynamic overlay loading instead, including creating multiple 1-Wire busses to be used at the same time:
|
||||
|
||||
```
|
||||
sudo dtoverlay w1-gpio gpiopin=4 pullup=0 # header pin 7
|
||||
sudo dtoverlay w1-gpio gpiopin=17 pullup=0 # header pin 11
|
||||
sudo dtoverlay w1-gpio gpiopin=27 pullup=0 # header pin 13
|
||||
```
|
||||
|
||||
once any of the steps above have been performed, and discovery is complete you can list the devices that your Raspberry Pi has discovered via all 1-Wire busses (by default BCM4), like so:
|
||||
|
||||
```
|
||||
ls /sys/bus/w1/devices/
|
||||
```
|
||||
|
||||
n.b. Using w1-gpio on the Raspberry Pi typically needs a 4.7 kΩ pull-up resistor connected between the GPIO pin and a 3.3v supply (e.g. header pin 1 or 17). Other means of connecting 1-Wire devices to the Raspberry Pi are also possible, such as using i2c to 1-Wire bridge chips.
|
||||
|
|
|
@ -137,3 +137,4 @@ overlays:
|
|||
- unicorn-hat-hd
|
||||
- voice-hat
|
||||
- inkyphat
|
||||
- gertvga-666
|
||||
|
|
|
@ -0,0 +1,74 @@
|
|||
<!--
|
||||
---
|
||||
name: GertVGA 666
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: Pi Supply
|
||||
description: The Gert VGA 666 is a breakout/add on board for the Raspberry Pi for using a VGA monitor.
|
||||
url: https://www.kickstarter.com/projects/pisupply/gert-vga-666-kit-hardware-vga-for-raspberry-pi
|
||||
github: https://github.com/PiSupply/Gert-VGA-666
|
||||
schematic: https://github.com/fenlogic/vga666/blob/master/documents/vga_manual.pdf
|
||||
buy: https://www.pi-supply.com/product/gert-vga-666-hardware-vga-raspberry-pi/
|
||||
image: 'gertvga-666.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
name: V-SYNC
|
||||
'5':
|
||||
name: H-SYNC
|
||||
'7':
|
||||
name: Blue 2
|
||||
'8':
|
||||
name: Green 6
|
||||
'10':
|
||||
name: Green 7
|
||||
'11':
|
||||
name: Red 3
|
||||
'12':
|
||||
name: Red 4
|
||||
'19':
|
||||
name: Green 2
|
||||
'21':
|
||||
name: Blue 7
|
||||
'23':
|
||||
name: Green 3
|
||||
'24':
|
||||
name: Blue 6
|
||||
'26':
|
||||
name: Blue 5
|
||||
'29':
|
||||
name: Blue 3
|
||||
'31':
|
||||
name: Blue 4
|
||||
'32':
|
||||
name: Green 4
|
||||
'33':
|
||||
name: Green 5
|
||||
'35':
|
||||
name: Red 5
|
||||
'36':
|
||||
name: Red 2
|
||||
'38':
|
||||
name: Red 6
|
||||
'40':
|
||||
name: Red 7
|
||||
-->
|
||||
# GertVGA 666
|
||||
|
||||
The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi. It is an open source hardware design released publicly by Gert van Loo.
|
||||
|
||||
It is a neat and very useful solution for using a VGA screen/monitor with your Raspberry Pi and is far cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (using a parallel interface) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080p60 VGA video with no CPU load.
|
|
@ -31,8 +31,18 @@ Alternatively you can enable the one-wire interface on demand using raspi-config
|
|||
sudo modprobe w1-gpio
|
||||
```
|
||||
|
||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||
Newer kernels (4.9.28 and later) allow you to use dynamic overlay loading instead, including creating multiple 1-Wire busses to be used at the same time:
|
||||
|
||||
```
|
||||
sudo dtoverlay w1-gpio gpiopin=4 pullup=0 # header pin 7
|
||||
sudo dtoverlay w1-gpio gpiopin=17 pullup=0 # header pin 11
|
||||
sudo dtoverlay w1-gpio gpiopin=27 pullup=0 # header pin 13
|
||||
```
|
||||
|
||||
once any of the steps above have been performed, and discovery is complete you can list the devices that your Raspberry Pi has discovered via all 1-Wire busses (by default BCM4), like so:
|
||||
|
||||
```
|
||||
ls /sys/bus/w1/devices/
|
||||
```
|
||||
|
||||
n.b. Using w1-gpio on the Raspberry Pi typically needs a 4.7 kΩ pull-up resistor connected between the GPIO pin and a 3.3v supply (e.g. header pin 1 or 17). Other means of connecting 1-Wire devices to the Raspberry Pi are also possible, such as using i2c to 1-Wire bridge chips.
|
||||
|
|
|
@ -137,3 +137,4 @@ overlays:
|
|||
- unicorn-hat-hd
|
||||
- voice-hat
|
||||
- inkyphat
|
||||
- gertvga-666
|
||||
|
|
|
@ -0,0 +1,74 @@
|
|||
<!--
|
||||
---
|
||||
name: GertVGA 666
|
||||
class: board
|
||||
type: other
|
||||
formfactor: Custom
|
||||
manufacturer: Pi Supply
|
||||
description: The Gert VGA 666 is a breakout/add on board for the Raspberry Pi for using a VGA monitor.
|
||||
url: https://www.kickstarter.com/projects/pisupply/gert-vga-666-kit-hardware-vga-for-raspberry-pi
|
||||
github: https://github.com/PiSupply/Gert-VGA-666
|
||||
schematic: https://github.com/fenlogic/vga666/blob/master/documents/vga_manual.pdf
|
||||
buy: https://www.pi-supply.com/product/gert-vga-666-hardware-vga-raspberry-pi/
|
||||
image: 'gertvga-666.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
name: V-SYNC
|
||||
'5':
|
||||
name: H-SYNC
|
||||
'7':
|
||||
name: Blue 2
|
||||
'8':
|
||||
name: Green 6
|
||||
'10':
|
||||
name: Green 7
|
||||
'11':
|
||||
name: Red 3
|
||||
'12':
|
||||
name: Red 4
|
||||
'19':
|
||||
name: Green 2
|
||||
'21':
|
||||
name: Blue 7
|
||||
'23':
|
||||
name: Green 3
|
||||
'24':
|
||||
name: Blue 6
|
||||
'26':
|
||||
name: Blue 5
|
||||
'29':
|
||||
name: Blue 3
|
||||
'31':
|
||||
name: Blue 4
|
||||
'32':
|
||||
name: Green 4
|
||||
'33':
|
||||
name: Green 5
|
||||
'35':
|
||||
name: Red 5
|
||||
'36':
|
||||
name: Red 2
|
||||
'38':
|
||||
name: Red 6
|
||||
'40':
|
||||
name: Red 7
|
||||
-->
|
||||
# GertVGA 666
|
||||
|
||||
The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi. It is an open source hardware design released publicly by Gert van Loo.
|
||||
|
||||
It is a neat and very useful solution for using a VGA screen/monitor with your Raspberry Pi and is far cheaper than an HDMI to VGA adapter or similar. The VGA connection is driven natively in hardware over the GPIO pins (using a parallel interface) and uses around the same CPU load as the HDMI connection on board. It is capable of displaying 1080p60 VGA video with no CPU load.
|
|
@ -31,8 +31,18 @@ Alternatively you can enable the one-wire interface on demand using raspi-config
|
|||
sudo modprobe w1-gpio
|
||||
```
|
||||
|
||||
once either of the steps above has been performed, you can list the devices your Raspberry Pi can probe via (by default) BCM4, like so:
|
||||
Newer kernels (4.9.28 and later) allow you to use dynamic overlay loading instead, including creating multiple 1-Wire busses to be used at the same time:
|
||||
|
||||
```
|
||||
sudo dtoverlay w1-gpio gpiopin=4 pullup=0 # header pin 7
|
||||
sudo dtoverlay w1-gpio gpiopin=17 pullup=0 # header pin 11
|
||||
sudo dtoverlay w1-gpio gpiopin=27 pullup=0 # header pin 13
|
||||
```
|
||||
|
||||
once any of the steps above have been performed, and discovery is complete you can list the devices that your Raspberry Pi has discovered via all 1-Wire busses (by default BCM4), like so:
|
||||
|
||||
```
|
||||
ls /sys/bus/w1/devices/
|
||||
```
|
||||
|
||||
n.b. Using w1-gpio on the Raspberry Pi typically needs a 4.7 kΩ pull-up resistor connected between the GPIO pin and a 3.3v supply (e.g. header pin 1 or 17). Other means of connecting 1-Wire devices to the Raspberry Pi are also possible, such as using i2c to 1-Wire bridge chips.
|
||||
|
|
Loading…
Reference in New Issue