Merge branch 'monarco-monarco-hat'
This commit is contained in:
commit
c7f9de889f
Binary file not shown.
After Width: | Height: | Size: 29 KiB |
|
@ -159,3 +159,4 @@ overlays:
|
|||
- adafruit-pi-oled
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
|
|
|
@ -0,0 +1,93 @@
|
|||
<!--
|
||||
---
|
||||
name: Monarco HAT
|
||||
class: board
|
||||
type: adc, dac, io, led, com, rtc, power, motor
|
||||
formfactor: HAT
|
||||
manufacturer: Monarco
|
||||
description: Industrial I/O for the Raspberry Pi
|
||||
url: https://monarco.io
|
||||
github: https://github.com/monarco
|
||||
schematic: http://www.monarco.io/docs/Monarco-HAT-Hardware-Reference-Manual.pdf
|
||||
buy: https://www.monarco.io/#buy-monarco-hat
|
||||
image: 'monarco-hat.png'
|
||||
pincount: 40
|
||||
eeprom: yes
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'8':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'10':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
'24':
|
||||
mode: spi
|
||||
'37':
|
||||
name: ID EEPROM write enable
|
||||
mode: output
|
||||
active: low
|
||||
'38':
|
||||
name: MCU bootloader enable
|
||||
mode: output
|
||||
active: high
|
||||
'40':
|
||||
name: MCU RESETn
|
||||
mode: output
|
||||
active: low
|
||||
i2c:
|
||||
'0x18':
|
||||
name: Real Time Clock Module
|
||||
device: MCP79410
|
||||
'0x6f':
|
||||
name: 1-Wire Interface Controller
|
||||
device: DS2482-100
|
||||
-->
|
||||
#Monarco HAT
|
||||
|
||||
Manufacturered by Monarco Solutions Group / REX Controls s.r.o., the Monarco HAT is is an all-in-one solution for using Raspberry Pi in industrial automation. It provides analog and digital inputs and outputs as well as RS-485 and 1-Wire communication interfaces. In fact, it turns the Raspberry Pi into a PLC or a mini industrial PC (IPC) ready for use in your automation project.
|
||||
|
||||
All the inputs and outputs are designed to directly interface standard industrial sensors and devices, eliminating the need for additional hardware.
|
||||
|
||||
##Features
|
||||
|
||||
- **Power supply: 10-30 VDC**, powers also the Raspberry Pi
|
||||
- **4x digital IN, 3.5-30 VDC**, optical isolation, common GND
|
||||
- 2x counter (pulse/DIR) or 2x encoder (A/B), up to 200 kHz
|
||||
- Counter values retention during power off
|
||||
- **4x digital OUT**, open-drain, max 40 VDC, 1 A per channel continuous
|
||||
- All with up to 100 kHz PWM
|
||||
- Short-circuit protection (continuous)
|
||||
- **2x analog IN**, 0-10 V / 0-20 mA, 12-bit
|
||||
- Electronic switching of voltage/current sensing mode
|
||||
- Protected against overvoltage and reverse polarity
|
||||
- 500 Hz bandwidth, configurable filter
|
||||
- **2x analog OUT**, 0-10 V, 0.5 ms settling time, 12-bit
|
||||
- **1x RS-485 bus** with ESD protection
|
||||
- **1x 1-Wire bus** with ESD protection
|
||||
- **9x LED indicator**, by default mapped as indicators for digital inputs and outputs and system status, user controllable
|
||||
- **High quality push-in terminals**, detachable connector
|
||||
- **Battery-backed RTC chip** for keeping the track of time
|
||||
- **Hardware watchdog** for power-cycling the Raspberry Pi in case of failure
|
||||
- Compatible with the **Raspberry Pi 7“ official touchscreen** (onboard connector for powering the display)
|
||||
- **EMC tested, CE marked**
|
|
@ -0,0 +1,93 @@
|
|||
<!--
|
||||
---
|
||||
name: Monarco HAT
|
||||
class: board
|
||||
type: adc, dac, io, led, com, rtc, power, motor
|
||||
formfactor: HAT
|
||||
manufacturer: Monarco
|
||||
description: Industrial I/O for the Raspberry Pi
|
||||
url: https://monarco.io
|
||||
github: https://github.com/monarco
|
||||
schematic: http://www.monarco.io/docs/Monarco-HAT-Hardware-Reference-Manual.pdf
|
||||
buy: https://www.monarco.io/#buy-monarco-hat
|
||||
image: 'monarco-hat.png'
|
||||
pincount: 40
|
||||
eeprom: yes
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'8':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'10':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
'24':
|
||||
mode: spi
|
||||
'37':
|
||||
name: ID EEPROM write enable
|
||||
mode: output
|
||||
active: low
|
||||
'38':
|
||||
name: MCU bootloader enable
|
||||
mode: output
|
||||
active: high
|
||||
'40':
|
||||
name: MCU RESETn
|
||||
mode: output
|
||||
active: low
|
||||
i2c:
|
||||
'0x18':
|
||||
name: Real Time Clock Module
|
||||
device: MCP79410
|
||||
'0x6f':
|
||||
name: 1-Wire Interface Controller
|
||||
device: DS2482-100
|
||||
-->
|
||||
#Monarco HAT
|
||||
|
||||
Manufacturered by Monarco Solutions Group / REX Controls s.r.o., the Monarco HAT is is an all-in-one solution for using Raspberry Pi in industrial automation. It provides analog and digital inputs and outputs as well as RS-485 and 1-Wire communication interfaces. In fact, it turns the Raspberry Pi into a PLC or a mini industrial PC (IPC) ready for use in your automation project.
|
||||
|
||||
All the inputs and outputs are designed to directly interface standard industrial sensors and devices, eliminating the need for additional hardware.
|
||||
|
||||
##Features
|
||||
|
||||
- **Power supply: 10-30 VDC**, powers also the Raspberry Pi
|
||||
- **4x digital IN, 3.5-30 VDC**, optical isolation, common GND
|
||||
- 2x counter (pulse/DIR) or 2x encoder (A/B), up to 200 kHz
|
||||
- Counter values retention during power off
|
||||
- **4x digital OUT**, open-drain, max 40 VDC, 1 A per channel continuous
|
||||
- All with up to 100 kHz PWM
|
||||
- Short-circuit protection (continuous)
|
||||
- **2x analog IN**, 0-10 V / 0-20 mA, 12-bit
|
||||
- Electronic switching of voltage/current sensing mode
|
||||
- Protected against overvoltage and reverse polarity
|
||||
- 500 Hz bandwidth, configurable filter
|
||||
- **2x analog OUT**, 0-10 V, 0.5 ms settling time, 12-bit
|
||||
- **1x RS-485 bus** with ESD protection
|
||||
- **1x 1-Wire bus** with ESD protection
|
||||
- **9x LED indicator**, by default mapped as indicators for digital inputs and outputs and system status, user controllable
|
||||
- **High quality push-in terminals**, detachable connector
|
||||
- **Battery-backed RTC chip** for keeping the track of time
|
||||
- **Hardware watchdog** for power-cycling the Raspberry Pi in case of failure
|
||||
- Compatible with the **Raspberry Pi 7“ official touchscreen** (onboard connector for powering the display)
|
||||
- **EMC tested, CE marked**
|
|
@ -158,3 +158,4 @@ overlays:
|
|||
- adafruit-pi-oled
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
|
|
|
@ -158,3 +158,4 @@ overlays:
|
|||
- adafruit-pi-oled
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
|
|
|
@ -0,0 +1,93 @@
|
|||
<!--
|
||||
---
|
||||
name: Monarco HAT
|
||||
class: board
|
||||
type: adc, dac, io, led, com, rtc, power, motor
|
||||
formfactor: HAT
|
||||
manufacturer: Monarco
|
||||
description: Industrial I/O for the Raspberry Pi
|
||||
url: https://monarco.io
|
||||
github: https://github.com/monarco
|
||||
schematic: http://www.monarco.io/docs/Monarco-HAT-Hardware-Reference-Manual.pdf
|
||||
buy: https://www.monarco.io/#buy-monarco-hat
|
||||
image: 'monarco-hat.png'
|
||||
pincount: 40
|
||||
eeprom: yes
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'8':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'10':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
'24':
|
||||
mode: spi
|
||||
'37':
|
||||
name: ID EEPROM write enable
|
||||
mode: output
|
||||
active: low
|
||||
'38':
|
||||
name: MCU bootloader enable
|
||||
mode: output
|
||||
active: high
|
||||
'40':
|
||||
name: MCU RESETn
|
||||
mode: output
|
||||
active: low
|
||||
i2c:
|
||||
'0x18':
|
||||
name: Real Time Clock Module
|
||||
device: MCP79410
|
||||
'0x6f':
|
||||
name: 1-Wire Interface Controller
|
||||
device: DS2482-100
|
||||
-->
|
||||
#Monarco HAT
|
||||
|
||||
Manufacturered by Monarco Solutions Group / REX Controls s.r.o., the Monarco HAT is is an all-in-one solution for using Raspberry Pi in industrial automation. It provides analog and digital inputs and outputs as well as RS-485 and 1-Wire communication interfaces. In fact, it turns the Raspberry Pi into a PLC or a mini industrial PC (IPC) ready for use in your automation project.
|
||||
|
||||
All the inputs and outputs are designed to directly interface standard industrial sensors and devices, eliminating the need for additional hardware.
|
||||
|
||||
##Features
|
||||
|
||||
- **Power supply: 10-30 VDC**, powers also the Raspberry Pi
|
||||
- **4x digital IN, 3.5-30 VDC**, optical isolation, common GND
|
||||
- 2x counter (pulse/DIR) or 2x encoder (A/B), up to 200 kHz
|
||||
- Counter values retention during power off
|
||||
- **4x digital OUT**, open-drain, max 40 VDC, 1 A per channel continuous
|
||||
- All with up to 100 kHz PWM
|
||||
- Short-circuit protection (continuous)
|
||||
- **2x analog IN**, 0-10 V / 0-20 mA, 12-bit
|
||||
- Electronic switching of voltage/current sensing mode
|
||||
- Protected against overvoltage and reverse polarity
|
||||
- 500 Hz bandwidth, configurable filter
|
||||
- **2x analog OUT**, 0-10 V, 0.5 ms settling time, 12-bit
|
||||
- **1x RS-485 bus** with ESD protection
|
||||
- **1x 1-Wire bus** with ESD protection
|
||||
- **9x LED indicator**, by default mapped as indicators for digital inputs and outputs and system status, user controllable
|
||||
- **High quality push-in terminals**, detachable connector
|
||||
- **Battery-backed RTC chip** for keeping the track of time
|
||||
- **Hardware watchdog** for power-cycling the Raspberry Pi in case of failure
|
||||
- Compatible with the **Raspberry Pi 7“ official touchscreen** (onboard connector for powering the display)
|
||||
- **EMC tested, CE marked**
|
|
@ -159,3 +159,4 @@ overlays:
|
|||
- adafruit-pi-oled
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
|
|
|
@ -0,0 +1,93 @@
|
|||
<!--
|
||||
---
|
||||
name: Monarco HAT
|
||||
class: board
|
||||
type: adc, dac, io, led, com, rtc, power, motor
|
||||
formfactor: HAT
|
||||
manufacturer: Monarco
|
||||
description: Industrial I/O for the Raspberry Pi
|
||||
url: https://monarco.io
|
||||
github: https://github.com/monarco
|
||||
schematic: http://www.monarco.io/docs/Monarco-HAT-Hardware-Reference-Manual.pdf
|
||||
buy: https://www.monarco.io/#buy-monarco-hat
|
||||
image: 'monarco-hat.png'
|
||||
pincount: 40
|
||||
eeprom: yes
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'8':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'10':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
'24':
|
||||
mode: spi
|
||||
'37':
|
||||
name: ID EEPROM write enable
|
||||
mode: output
|
||||
active: low
|
||||
'38':
|
||||
name: MCU bootloader enable
|
||||
mode: output
|
||||
active: high
|
||||
'40':
|
||||
name: MCU RESETn
|
||||
mode: output
|
||||
active: low
|
||||
i2c:
|
||||
'0x18':
|
||||
name: Real Time Clock Module
|
||||
device: MCP79410
|
||||
'0x6f':
|
||||
name: 1-Wire Interface Controller
|
||||
device: DS2482-100
|
||||
-->
|
||||
#Monarco HAT
|
||||
|
||||
Manufacturered by Monarco Solutions Group / REX Controls s.r.o., the Monarco HAT is is an all-in-one solution for using Raspberry Pi in industrial automation. It provides analog and digital inputs and outputs as well as RS-485 and 1-Wire communication interfaces. In fact, it turns the Raspberry Pi into a PLC or a mini industrial PC (IPC) ready for use in your automation project.
|
||||
|
||||
All the inputs and outputs are designed to directly interface standard industrial sensors and devices, eliminating the need for additional hardware.
|
||||
|
||||
##Features
|
||||
|
||||
- **Power supply: 10-30 VDC**, powers also the Raspberry Pi
|
||||
- **4x digital IN, 3.5-30 VDC**, optical isolation, common GND
|
||||
- 2x counter (pulse/DIR) or 2x encoder (A/B), up to 200 kHz
|
||||
- Counter values retention during power off
|
||||
- **4x digital OUT**, open-drain, max 40 VDC, 1 A per channel continuous
|
||||
- All with up to 100 kHz PWM
|
||||
- Short-circuit protection (continuous)
|
||||
- **2x analog IN**, 0-10 V / 0-20 mA, 12-bit
|
||||
- Electronic switching of voltage/current sensing mode
|
||||
- Protected against overvoltage and reverse polarity
|
||||
- 500 Hz bandwidth, configurable filter
|
||||
- **2x analog OUT**, 0-10 V, 0.5 ms settling time, 12-bit
|
||||
- **1x RS-485 bus** with ESD protection
|
||||
- **1x 1-Wire bus** with ESD protection
|
||||
- **9x LED indicator**, by default mapped as indicators for digital inputs and outputs and system status, user controllable
|
||||
- **High quality push-in terminals**, detachable connector
|
||||
- **Battery-backed RTC chip** for keeping the track of time
|
||||
- **Hardware watchdog** for power-cycling the Raspberry Pi in case of failure
|
||||
- Compatible with the **Raspberry Pi 7“ official touchscreen** (onboard connector for powering the display)
|
||||
- **EMC tested, CE marked**
|
|
@ -159,3 +159,4 @@ overlays:
|
|||
- adafruit-pi-oled
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
|
|
|
@ -0,0 +1,93 @@
|
|||
<!--
|
||||
---
|
||||
name: Monarco HAT
|
||||
class: board
|
||||
type: adc, dac, io, led, com, rtc, power, motor
|
||||
formfactor: HAT
|
||||
manufacturer: Monarco
|
||||
description: Industrial I/O for the Raspberry Pi
|
||||
url: https://monarco.io
|
||||
github: https://github.com/monarco
|
||||
schematic: http://www.monarco.io/docs/Monarco-HAT-Hardware-Reference-Manual.pdf
|
||||
buy: https://www.monarco.io/#buy-monarco-hat
|
||||
image: 'monarco-hat.png'
|
||||
pincount: 40
|
||||
eeprom: yes
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'8':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'10':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
'24':
|
||||
mode: spi
|
||||
'37':
|
||||
name: ID EEPROM write enable
|
||||
mode: output
|
||||
active: low
|
||||
'38':
|
||||
name: MCU bootloader enable
|
||||
mode: output
|
||||
active: high
|
||||
'40':
|
||||
name: MCU RESETn
|
||||
mode: output
|
||||
active: low
|
||||
i2c:
|
||||
'0x18':
|
||||
name: Real Time Clock Module
|
||||
device: MCP79410
|
||||
'0x6f':
|
||||
name: 1-Wire Interface Controller
|
||||
device: DS2482-100
|
||||
-->
|
||||
#Monarco HAT
|
||||
|
||||
Manufacturered by Monarco Solutions Group / REX Controls s.r.o., the Monarco HAT is is an all-in-one solution for using Raspberry Pi in industrial automation. It provides analog and digital inputs and outputs as well as RS-485 and 1-Wire communication interfaces. In fact, it turns the Raspberry Pi into a PLC or a mini industrial PC (IPC) ready for use in your automation project.
|
||||
|
||||
All the inputs and outputs are designed to directly interface standard industrial sensors and devices, eliminating the need for additional hardware.
|
||||
|
||||
##Features
|
||||
|
||||
- **Power supply: 10-30 VDC**, powers also the Raspberry Pi
|
||||
- **4x digital IN, 3.5-30 VDC**, optical isolation, common GND
|
||||
- 2x counter (pulse/DIR) or 2x encoder (A/B), up to 200 kHz
|
||||
- Counter values retention during power off
|
||||
- **4x digital OUT**, open-drain, max 40 VDC, 1 A per channel continuous
|
||||
- All with up to 100 kHz PWM
|
||||
- Short-circuit protection (continuous)
|
||||
- **2x analog IN**, 0-10 V / 0-20 mA, 12-bit
|
||||
- Electronic switching of voltage/current sensing mode
|
||||
- Protected against overvoltage and reverse polarity
|
||||
- 500 Hz bandwidth, configurable filter
|
||||
- **2x analog OUT**, 0-10 V, 0.5 ms settling time, 12-bit
|
||||
- **1x RS-485 bus** with ESD protection
|
||||
- **1x 1-Wire bus** with ESD protection
|
||||
- **9x LED indicator**, by default mapped as indicators for digital inputs and outputs and system status, user controllable
|
||||
- **High quality push-in terminals**, detachable connector
|
||||
- **Battery-backed RTC chip** for keeping the track of time
|
||||
- **Hardware watchdog** for power-cycling the Raspberry Pi in case of failure
|
||||
- Compatible with the **Raspberry Pi 7“ official touchscreen** (onboard connector for powering the display)
|
||||
- **EMC tested, CE marked**
|
|
@ -159,3 +159,4 @@ overlays:
|
|||
- adafruit-pi-oled
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
|
|
|
@ -0,0 +1,93 @@
|
|||
<!--
|
||||
---
|
||||
name: Monarco HAT
|
||||
class: board
|
||||
type: adc, dac, io, led, com, rtc, power, motor
|
||||
formfactor: HAT
|
||||
manufacturer: Monarco
|
||||
description: Industrial I/O for the Raspberry Pi
|
||||
url: https://monarco.io
|
||||
github: https://github.com/monarco
|
||||
schematic: http://www.monarco.io/docs/Monarco-HAT-Hardware-Reference-Manual.pdf
|
||||
buy: https://www.monarco.io/#buy-monarco-hat
|
||||
image: 'monarco-hat.png'
|
||||
pincount: 40
|
||||
eeprom: yes
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'8':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'10':
|
||||
name: RS-485, can be disabled
|
||||
mode: uart
|
||||
'19':
|
||||
mode: spi
|
||||
'21':
|
||||
mode: spi
|
||||
'23':
|
||||
mode: spi
|
||||
'24':
|
||||
mode: spi
|
||||
'37':
|
||||
name: ID EEPROM write enable
|
||||
mode: output
|
||||
active: low
|
||||
'38':
|
||||
name: MCU bootloader enable
|
||||
mode: output
|
||||
active: high
|
||||
'40':
|
||||
name: MCU RESETn
|
||||
mode: output
|
||||
active: low
|
||||
i2c:
|
||||
'0x18':
|
||||
name: Real Time Clock Module
|
||||
device: MCP79410
|
||||
'0x6f':
|
||||
name: 1-Wire Interface Controller
|
||||
device: DS2482-100
|
||||
-->
|
||||
#Monarco HAT
|
||||
|
||||
Manufacturered by Monarco Solutions Group / REX Controls s.r.o., the Monarco HAT is is an all-in-one solution for using Raspberry Pi in industrial automation. It provides analog and digital inputs and outputs as well as RS-485 and 1-Wire communication interfaces. In fact, it turns the Raspberry Pi into a PLC or a mini industrial PC (IPC) ready for use in your automation project.
|
||||
|
||||
All the inputs and outputs are designed to directly interface standard industrial sensors and devices, eliminating the need for additional hardware.
|
||||
|
||||
##Features
|
||||
|
||||
- **Power supply: 10-30 VDC**, powers also the Raspberry Pi
|
||||
- **4x digital IN, 3.5-30 VDC**, optical isolation, common GND
|
||||
- 2x counter (pulse/DIR) or 2x encoder (A/B), up to 200 kHz
|
||||
- Counter values retention during power off
|
||||
- **4x digital OUT**, open-drain, max 40 VDC, 1 A per channel continuous
|
||||
- All with up to 100 kHz PWM
|
||||
- Short-circuit protection (continuous)
|
||||
- **2x analog IN**, 0-10 V / 0-20 mA, 12-bit
|
||||
- Electronic switching of voltage/current sensing mode
|
||||
- Protected against overvoltage and reverse polarity
|
||||
- 500 Hz bandwidth, configurable filter
|
||||
- **2x analog OUT**, 0-10 V, 0.5 ms settling time, 12-bit
|
||||
- **1x RS-485 bus** with ESD protection
|
||||
- **1x 1-Wire bus** with ESD protection
|
||||
- **9x LED indicator**, by default mapped as indicators for digital inputs and outputs and system status, user controllable
|
||||
- **High quality push-in terminals**, detachable connector
|
||||
- **Battery-backed RTC chip** for keeping the track of time
|
||||
- **Hardware watchdog** for power-cycling the Raspberry Pi in case of failure
|
||||
- Compatible with the **Raspberry Pi 7“ official touchscreen** (onboard connector for powering the display)
|
||||
- **EMC tested, CE marked**
|
Loading…
Reference in New Issue