From e35a875797828dfcb835267b65d4cadd72bbacd8 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Tue, 25 Oct 2016 20:18:30 +0100
Subject: [PATCH 01/16] removed empty power section

---
 draft/overlay/4tronix-motor-shim.md | 15 +++++++--------
 draft/overlay/4tronix-pistop.md     |  3 +--
 2 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/draft/overlay/4tronix-motor-shim.md b/draft/overlay/4tronix-motor-shim.md
index a726898..df8b5dd 100644
--- a/draft/overlay/4tronix-motor-shim.md
+++ b/draft/overlay/4tronix-motor-shim.md
@@ -11,23 +11,22 @@ buy: http://4tronix.co.uk/store/index.php?rt=product/product&product_id=543
 image: 'pzm-shim.png'
 pincount: 6
 eeprom: no
-power:
 ground:
   '39':
 pin:
-  '37':
-    name: MotorA_0
-    mode: output
-  '38':
-    name: MotorA_1
-    mode: output
   '35':
     name: MotorB_0
     mode: output
   '36':
     name: MotorB_1
     mode: output
+  '37':
+    name: MotorA_0
+    mode: output
+  '38':
+    name: MotorA_1
+    mode: output
 -->
 #Pi Zero Motor Shim
 
-The PZM shim gives you the simplest possible motor driver that can be fitted directly to the header of a Pi Zero (or other 40-pin model of Pi). Headers are included to use if required so that it is a plug-in device rather than soldered directly if preferred.
\ No newline at end of file
+The PZM shim gives you the simplest possible motor driver that can be fitted directly to the header of a Pi Zero (or other 40-pin model of Pi). Headers are included to use if required so that it is a plug-in device rather than soldered directly if preferred.
diff --git a/draft/overlay/4tronix-pistop.md b/draft/overlay/4tronix-pistop.md
index 24df890..7268d18 100644
--- a/draft/overlay/4tronix-pistop.md
+++ b/draft/overlay/4tronix-pistop.md
@@ -11,7 +11,6 @@ buy: http://4tronix.co.uk/store/index.php?rt=product/product&product_id=390
 image: '4tronix-pistop.png'
 pincount: 4
 eeprom: no
-power:
 ground:
   '6':
   '9':
@@ -133,4 +132,4 @@ pin:
 -->
 #Pi Stop Traffic Lights
 
-The PiStop is placed vertically into the GPIO connectors and can be fitted into several positions in the board. It can be fitted into 26-pin headers as well as 40-pin headers. It only uses 3 GPIO pins plus ground, but you can fit multiple PiStops into one header, although not all positions are possible simultaneously as some pins are shared across the options.
\ No newline at end of file
+The PiStop is placed vertically into the GPIO connectors and can be fitted into several positions in the board. It can be fitted into 26-pin headers as well as 40-pin headers. It only uses 3 GPIO pins plus ground, but you can fit multiple PiStops into one header, although not all positions are possible simultaneously as some pins are shared across the options.

From 8750b256af50ad14d170e778fe9abdde5aa413af Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Tue, 25 Oct 2016 20:39:59 +0100
Subject: [PATCH 02/16] removed all but one position for PiStop

---
 draft/overlay/4tronix-pistop.md | 117 +++-----------------------------
 1 file changed, 8 insertions(+), 109 deletions(-)

diff --git a/draft/overlay/4tronix-pistop.md b/draft/overlay/4tronix-pistop.md
index 7268d18..0cd15d2 100644
--- a/draft/overlay/4tronix-pistop.md
+++ b/draft/overlay/4tronix-pistop.md
@@ -12,124 +12,23 @@ image: '4tronix-pistop.png'
 pincount: 4
 eeprom: no
 ground:
-  '6':
   '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
 pin:
-  '3':
-    name: Red_0
-    mode: output
-    active: high
-  '5':
-    name: Amber_0
-    mode: output
-    active: high
-  '7':
-    name: Green_0
-    mode: output
-    active: high
-  '15':
-    name: Red_1
+  '11':
+    name: Green
     mode: output
     active: high
   '13':
-    name: Amber_1
+    name: Amber
     mode: output
     active: high
-  '11':
-    name: Green_1
-    mode: output
-    active: high
-  '19':
-    name: Red_2
-    mode: output
-    active: high
-  '21':
-    name: Amber_2
-    mode: output
-    active: high
-  '23':
-    name: Green_2
-    mode: output
-    active: high
-  '31':
-    name: Red_3
-    mode: output
-    active: high
-  '29':
-    name: Amber_3
-    mode: output
-    active: high
-  '27':
-    name: Green_3
-    mode: output
-    active: high
-  '33':
-    name: Red_4
-    mode: output
-    active: high
-  '35':
-    name: Amber_4
-    mode: output
-    active: high
-  '37':
-    name: Green_4
-    mode: output
-    active: high
-  '12':
-    name: Red_5
-    mode: output
-    active: high
-  '10':
-    name: Amber_5
-    mode: output
-    active: high
-  '8':
-    name: Green_5
-    mode: output
-    active: high
-  '26':
-    name: Red_6
-    mode: output
-    active: high
-  '24':
-    name: Amber_6
-    mode: output
-    active: high
-  '22':
-    name: Green_6
-    mode: output
-    active: high
-  '24':
-    name: Red_7
-    mode: output
-    active: high
-  '26':
-    name: Amber_7
-    mode: output
-    active: high
-  '28':
-    name: Green_7
-    mode: output
-    active: high
-  '40':
-    name: Red_8
-    mode: output
-    active: high
-  '38':
-    name: Amber_8
-    mode: output
-    active: high
-  '36':
-    name: Green_8
+  '15':
+    name: Red
     mode: output
     active: high
 -->
 #Pi Stop Traffic Lights
 
-The PiStop is placed vertically into the GPIO connectors and can be fitted into several positions in the board. It can be fitted into 26-pin headers as well as 40-pin headers. It only uses 3 GPIO pins plus ground, but you can fit multiple PiStops into one header, although not all positions are possible simultaneously as some pins are shared across the options.
+The PiStop is placed vertically into the GPIO connectors and can be fitted into several positions in the board. It can be fitted into 26-pin headers as well as 40-pin headers.
+
+PiStop only uses 3 GPIO pins plus ground, but you can fit multiple PiStops into one header, although not all positions are possible simultaneously as some pins are shared across the options. Note that only one position is illustrated in the pinout, but any succession of 3 GPIO next to a ground pin is suitable.

From 1eb492fbd4977d0e7490ade8eb3f07ea52ae28d7 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Tue, 25 Oct 2016 23:36:20 +0100
Subject: [PATCH 03/16] new dtb value for HAT with eeprom that include a dt
 blob

---
 generate-html.py              | 11 ++++++-----
 src/de/translate/sense-hat.md |  2 +-
 src/en/overlay/sense-hat.md   |  2 +-
 src/es/translate/sense-hat.md |  2 +-
 src/fr/translate/sense-hat.md |  2 +-
 src/it/translate/sense-hat.md |  2 +-
 src/tr/translate/sense-hat.md |  2 +-
 7 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/generate-html.py b/generate-html.py
index 304e7b4..7eb92a3 100755
--- a/generate-html.py
+++ b/generate-html.py
@@ -30,6 +30,7 @@ default_strings = {
     'uses_3v3': 'Needs 3v3 power',
     'uses_i2c': 'Uses I2C',
     'uses_spi': 'Uses SPI',
+    'uses_eeprom': 'Uses EEPROM',
     'uses_n_gpio_pins': 'Uses {} GPIO pins',
     'bcm_pin_rev1_pi': 'BCM pin {} on Rev 1 ( very early ) Pi',
     'physical_pin_n': 'Physical pin {}',
@@ -154,6 +155,11 @@ def load_overlay(overlay):
             if uses_spi:
                 details.append(strings['uses_spi'])
 
+        if 'eeprom' in loaded:
+            eeprom = str(loaded['eeprom'])
+            if eeprom == 'dtb':
+                details.append(strings['uses_eeprom'])
+
         if 'power' in loaded:
             uses_5v = False
             uses_3v3 = False
@@ -176,11 +182,6 @@ def load_overlay(overlay):
             elif uses_3v3:
                 details.append(strings['uses_3v3'])
 
-        if 'eeprom' in loaded:
-            eeprom = str(loaded['eeprom'])
-            if eeprom == 'yes':
-                details.append(strings['uses_eeprom'])
-
         # A URL to more information about the add-on board, could be a GitHub readme or an about page
         if 'url' in loaded:
             details.append('[{text}]({url})'.format(text=strings['more_information'], url=loaded['url']))
diff --git a/src/de/translate/sense-hat.md b/src/de/translate/sense-hat.md
index 11ad544..61102b3 100644
--- a/src/de/translate/sense-hat.md
+++ b/src/de/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: dtb
 power:
   '1':
   '2':
diff --git a/src/en/overlay/sense-hat.md b/src/en/overlay/sense-hat.md
index 11ad544..61102b3 100644
--- a/src/en/overlay/sense-hat.md
+++ b/src/en/overlay/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: dtb
 power:
   '1':
   '2':
diff --git a/src/es/translate/sense-hat.md b/src/es/translate/sense-hat.md
index 11ad544..61102b3 100644
--- a/src/es/translate/sense-hat.md
+++ b/src/es/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: dtb
 power:
   '1':
   '2':
diff --git a/src/fr/translate/sense-hat.md b/src/fr/translate/sense-hat.md
index 11ad544..61102b3 100644
--- a/src/fr/translate/sense-hat.md
+++ b/src/fr/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: dtb
 power:
   '1':
   '2':
diff --git a/src/it/translate/sense-hat.md b/src/it/translate/sense-hat.md
index 11ad544..61102b3 100644
--- a/src/it/translate/sense-hat.md
+++ b/src/it/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: dtb
 power:
   '1':
   '2':
diff --git a/src/tr/translate/sense-hat.md b/src/tr/translate/sense-hat.md
index 11ad544..61102b3 100644
--- a/src/tr/translate/sense-hat.md
+++ b/src/tr/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: dtb
 power:
   '1':
   '2':

From 0abe280e8768ee660b929554098917e79ee40be2 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 00:07:05 +0100
Subject: [PATCH 04/16] some translated strings

---
 src/en/settings.yaml |  2 +-
 src/fr/settings.yaml |  2 +-
 src/tr/settings.yaml | 20 ++++++++++----------
 3 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/src/en/settings.yaml b/src/en/settings.yaml
index 751b20d..b7ffcdb 100644
--- a/src/en/settings.yaml
+++ b/src/en/settings.yaml
@@ -16,7 +16,7 @@ strings:
 - type_hat: 'HAT form-factor'
 - type_phat: 'pHAT form-factor'
 - type_classic: 'Classic form-factor'
-- uses_eeprom: 'Uses EEPROM'
+- uses_eeprom: 'EEPROM auto-config'
 - uses_i2c: 'Uses I2C'
 - uses_spi: 'Uses SPI'
 - uses_5v_and_3v3: 'Needs 5v and 3v3 power'
diff --git a/src/fr/settings.yaml b/src/fr/settings.yaml
index cdaa920..b186419 100644
--- a/src/fr/settings.yaml
+++ b/src/fr/settings.yaml
@@ -16,7 +16,7 @@ strings:
 - type_hat: 'format HAT'
 - type_phat: 'format pHAT'
 - type_classic: 'format Classic'
-- uses_eeprom: 'EEPROM'
+- uses_eeprom: 'configuration automatique EEPROM'
 - uses_i2c: 'bus I2C'
 - uses_spi: 'bus SPI'
 - uses_5v_and_3v3: 'Alim. 5v et 3v3'
diff --git a/src/tr/settings.yaml b/src/tr/settings.yaml
index 106d6c9..6faf44e 100644
--- a/src/tr/settings.yaml
+++ b/src/tr/settings.yaml
@@ -16,21 +16,21 @@ strings:
 - type_hat: 'HAT form-factor'
 - type_phat: 'pHAT form-factor'
 - type_classic: 'Classic form-factor'
-- uses_eeprom: 'EEPROM'
-- uses_i2c: 'I2C'
-- uses_spi: 'SPI'
-- uses_5v_and_3v3: '5v+3.3V Güç'
+- uses_eeprom: 'Kullanan EEPROM'
+- uses_i2c: 'Kullanan I2C'
+- uses_spi: 'Kullanan SPI'
+- uses_5v_and_3v3: '5v ve 3.3V Güç'
 - uses_5v: '5v Güç'
 - uses_3v3: '3.3V Güç'
-- uses_n_gpio_pins: 'Uses {} GPIO pins'
+- uses_n_gpio_pins: 'Kullanan {} GPIO pins'
 - bcm_pin_rev1_pi: 'BCM pin {} on Rev 1 ( very early ) Pi'
 - physical_pin_n: 'Physical pin {}'
 - wiring_pi_pin: 'Wiring Pi pin {}'
-- made_by: 'Made by {manufacturer}'
-- more_information: 'More Information'
-- github_repository: 'GitHub Repository'
-- buy_now: 'Buy Now'
-- details: 'Details'
+- made_by: 'Yapılan {manufacturer}'
+- more_information: 'Daha fazla bilgi'
+- github_repository: 'GitHub'
+- buy_now: 'Şimdi satın al'
+- details: 'Ayrıntılar'
 featured:
 - display-o-tron
 - piborg-ledborg

From 3c94d6ce3afe38c716b7d98d2af84210c735b3b8 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 20:05:35 +0100
Subject: [PATCH 05/16] eeprom 'yes' and 'required' handled with differet
 strings

---
 generate-html.py              | 63 ++++++++++++++++++-----------------
 src/de/settings.yaml          |  5 +--
 src/de/translate/sense-hat.md |  2 +-
 src/en/overlay/sense-hat.md   |  2 +-
 src/en/settings.yaml          |  7 ++--
 src/es/settings.yaml          |  3 +-
 src/es/translate/sense-hat.md |  2 +-
 src/fr/settings.yaml          |  7 ++--
 src/fr/translate/sense-hat.md |  2 +-
 src/it/settings.yaml          |  3 +-
 src/it/translate/sense-hat.md |  2 +-
 src/tr/settings.yaml          |  1 +
 src/tr/translate/sense-hat.md |  2 +-
 13 files changed, 54 insertions(+), 47 deletions(-)

diff --git a/generate-html.py b/generate-html.py
index 7eb92a3..4962f5b 100755
--- a/generate-html.py
+++ b/generate-html.py
@@ -31,6 +31,7 @@ default_strings = {
     'uses_i2c': 'Uses I2C',
     'uses_spi': 'Uses SPI',
     'uses_eeprom': 'Uses EEPROM',
+    'uses_eepvid': 'Uses VID/PID',
     'uses_n_gpio_pins': 'Uses {} GPIO pins',
     'bcm_pin_rev1_pi': 'BCM pin {} on Rev 1 ( very early ) Pi',
     'physical_pin_n': 'Physical pin {}',
@@ -114,6 +115,35 @@ def load_overlay(overlay):
             else:
                 details.append(strings['pin_header'].format(pincount))
 
+        if 'eeprom' in loaded:
+            eeprom = str(loaded['eeprom'])
+            if eeprom == 'True':
+                details.append(strings['uses_eepvid'])
+            if eeprom == 'required':
+                details.append(strings['uses_eeprom'])
+
+        if 'power' in loaded:
+            uses_5v = False
+            uses_3v3 = False
+
+            for pin in loaded['power']:
+                pin = str(pin)
+                if pin.startswith('bcm'):
+                    pin = pinout.bcm_to_physical(pin[3:])
+
+                if pin in ['2','4']:
+                    uses_5v = True
+
+                if pin in ['1','17']:
+                    uses_3v3 = True
+
+            if uses_5v and uses_3v3:
+                details.append(strings['uses_5v_and_3v3'])
+            elif uses_5v:
+                details.append(strings['uses_5v'])
+            elif uses_3v3:
+                details.append(strings['uses_3v3'])
+
         '''
         If the overlay includes a collection of pins then
         loop through them and count how many non-power pins are used
@@ -144,43 +174,14 @@ def load_overlay(overlay):
                     if pin in ['19','21','23'] and data['mode'] == 'spi':
                         uses_spi = True
 
-
-
-            if uses > 0:
-                details.append(strings['uses_n_gpio_pins'].format(uses))
-
             if uses_i2c:
                 details.append(strings['uses_i2c'])
 
             if uses_spi:
                 details.append(strings['uses_spi'])
 
-        if 'eeprom' in loaded:
-            eeprom = str(loaded['eeprom'])
-            if eeprom == 'dtb':
-                details.append(strings['uses_eeprom'])
-
-        if 'power' in loaded:
-            uses_5v = False
-            uses_3v3 = False
-
-            for pin in loaded['power']:
-                pin = str(pin)
-                if pin.startswith('bcm'):
-                    pin = pinout.bcm_to_physical(pin[3:])
-
-                if pin in ['2','4']:
-                    uses_5v = True
-
-                if pin in ['1','17']:
-                    uses_3v3 = True
-
-            if uses_5v and uses_3v3:
-                details.append(strings['uses_5v_and_3v3'])
-            elif uses_5v:
-                details.append(strings['uses_5v'])
-            elif uses_3v3:
-                details.append(strings['uses_3v3'])
+            if uses > 0:
+                details.append(strings['uses_n_gpio_pins'].format(uses))
 
         # A URL to more information about the add-on board, could be a GitHub readme or an about page
         if 'url' in loaded:
diff --git a/src/de/settings.yaml b/src/de/settings.yaml
index 1601ce5..b45d49e 100644
--- a/src/de/settings.yaml
+++ b/src/de/settings.yaml
@@ -1,6 +1,6 @@
 ---
 default_desc: The comprehensive Raspberry Pi GPIO Pinout guide for the original Raspberry
-default_title: Raspberry Pi GPIO Pinout - Pi 1, B+, Pi 2
+default_title: Raspberry Pi GPIO Pinout
 title_suffix: " at Raspberry Pi GPIO Pinout"
 base_url: /pinout/
 resource_url: /resources/
@@ -16,6 +16,7 @@ strings:
 - type_hat: 'HAT form-factor'
 - type_phat: 'pHAT form-factor'
 - type_classic: 'Classic form-factor'
+- uses_eepvid: 'EEPROM Hersteller ID'
 - uses_eeprom: 'benutzt EEPROM'
 - uses_i2c: 'benutzt I2C'
 - uses_spi: 'benutzt SPI'
@@ -28,7 +29,7 @@ strings:
 - wiring_pi_pin: 'Wiring Pi Anschluss {}'
 - made_by: 'Hersteller: {manufacturer}'
 - more_information: 'Mehr Informationen'
-- github_repository: 'GitHub Repository'
+- github_repository: 'GitHub'
 - buy_now: 'jetzt kaufen'
 featured:
 - display-o-tron
diff --git a/src/de/translate/sense-hat.md b/src/de/translate/sense-hat.md
index 61102b3..3bdf12e 100644
--- a/src/de/translate/sense-hat.md
+++ b/src/de/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: dtb
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/en/overlay/sense-hat.md b/src/en/overlay/sense-hat.md
index 61102b3..3bdf12e 100644
--- a/src/en/overlay/sense-hat.md
+++ b/src/en/overlay/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: dtb
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/en/settings.yaml b/src/en/settings.yaml
index b7ffcdb..51551dc 100644
--- a/src/en/settings.yaml
+++ b/src/en/settings.yaml
@@ -16,9 +16,10 @@ strings:
 - type_hat: 'HAT form-factor'
 - type_phat: 'pHAT form-factor'
 - type_classic: 'Classic form-factor'
-- uses_eeprom: 'EEPROM auto-config'
-- uses_i2c: 'Uses I2C'
-- uses_spi: 'Uses SPI'
+- uses_eepvid: 'EEPROM product ID'
+- uses_eeprom: 'EEPROM auto configuration'
+- uses_i2c: 'Communication over I2C'
+- uses_spi: 'Communication over SPI'
 - uses_5v_and_3v3: 'Needs 5v and 3v3 power'
 - uses_5v: 'Needs 5v power'
 - uses_3v3: 'Needs 3v3 power'
diff --git a/src/es/settings.yaml b/src/es/settings.yaml
index 0e5f425..b7f0016 100644
--- a/src/es/settings.yaml
+++ b/src/es/settings.yaml
@@ -16,6 +16,7 @@ strings:
 - type_hat: 'formato HAT'
 - type_phat: 'formato pHAT'
 - type_classic: 'formato clásico'
+- uses_eepvid: 'EEPROM ID'
 - uses_eeprom: 'Usa EEPROM'
 - uses_i2c: 'Usa I2C'
 - uses_spi: 'Usa SPI'
@@ -28,7 +29,7 @@ strings:
 - wiring_pi_pin: 'Wiring Pi pin {}'
 - made_by: 'Hecho por {manufacturer}'
 - more_information: 'More Information'
-- github_repository: 'GitHub Repository'
+- github_repository: 'GitHub'
 - buy_now: 'Buy Now'
 featured:
 - ab-adc-pi-zero
diff --git a/src/es/translate/sense-hat.md b/src/es/translate/sense-hat.md
index 61102b3..3bdf12e 100644
--- a/src/es/translate/sense-hat.md
+++ b/src/es/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: dtb
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/fr/settings.yaml b/src/fr/settings.yaml
index b186419..5628cca 100644
--- a/src/fr/settings.yaml
+++ b/src/fr/settings.yaml
@@ -16,9 +16,10 @@ strings:
 - type_hat: 'format HAT'
 - type_phat: 'format pHAT'
 - type_classic: 'format Classic'
-- uses_eeprom: 'configuration automatique EEPROM'
-- uses_i2c: 'bus I2C'
-- uses_spi: 'bus SPI'
+- uses_eepvid: 'identification produit par EEPROM'
+- uses_eeprom: 'configuration automatique par EEPROM'
+- uses_i2c: 'communication par bus I2C'
+- uses_spi: 'communication par bus SPI'
 - uses_5v_and_3v3: 'Alim. 5v et 3v3'
 - uses_5v: 'Alim. 5v'
 - uses_3v3: 'Alim. 3v3'
diff --git a/src/fr/translate/sense-hat.md b/src/fr/translate/sense-hat.md
index 61102b3..3bdf12e 100644
--- a/src/fr/translate/sense-hat.md
+++ b/src/fr/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: dtb
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/it/settings.yaml b/src/it/settings.yaml
index 8ced550..1d467ea 100644
--- a/src/it/settings.yaml
+++ b/src/it/settings.yaml
@@ -16,6 +16,7 @@ strings:
 - type_hat: 'Fattore di forma HAT'
 - type_phat: 'Fattore di forma pHAT'
 - type_classic: 'Fattore di forma classico'
+- uses_eepvid: 'Prodotto ID EEPROM'
 - uses_eeprom: 'Utilizza EEPROM'
 - uses_i2c: 'Utilizza I2C'
 - uses_spi: 'Utilizza SPI'
@@ -28,7 +29,7 @@ strings:
 - wiring_pi_pin: 'Wiring Pi pin {}'
 - made_by: 'Prodotto da {manufacturer}'
 - more_information: 'Maggiori informazioni'
-- github_repository: 'GitHub Repository'
+- github_repository: 'GitHub'
 - buy_now: 'Acquista'
 featured:
 - display-o-tron
diff --git a/src/it/translate/sense-hat.md b/src/it/translate/sense-hat.md
index 61102b3..3bdf12e 100644
--- a/src/it/translate/sense-hat.md
+++ b/src/it/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: dtb
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/tr/settings.yaml b/src/tr/settings.yaml
index 6faf44e..24ccad2 100644
--- a/src/tr/settings.yaml
+++ b/src/tr/settings.yaml
@@ -16,6 +16,7 @@ strings:
 - type_hat: 'HAT form-factor'
 - type_phat: 'pHAT form-factor'
 - type_classic: 'Classic form-factor'
+- uses_eepvid: 'EEPROM ID'
 - uses_eeprom: 'Kullanan EEPROM'
 - uses_i2c: 'Kullanan I2C'
 - uses_spi: 'Kullanan SPI'
diff --git a/src/tr/translate/sense-hat.md b/src/tr/translate/sense-hat.md
index 61102b3..3bdf12e 100644
--- a/src/tr/translate/sense-hat.md
+++ b/src/tr/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: dtb
+eeprom: required
 power:
   '1':
   '2':

From b178c86cf17c052227ad91a048ebc55d228163b4 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 20:29:15 +0100
Subject: [PATCH 06/16] fr strings tweaks

---
 src/fr/settings.yaml | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/src/fr/settings.yaml b/src/fr/settings.yaml
index 5628cca..4a15291 100644
--- a/src/fr/settings.yaml
+++ b/src/fr/settings.yaml
@@ -20,9 +20,9 @@ strings:
 - uses_eeprom: 'configuration automatique par EEPROM'
 - uses_i2c: 'communication par bus I2C'
 - uses_spi: 'communication par bus SPI'
-- uses_5v_and_3v3: 'Alim. 5v et 3v3'
-- uses_5v: 'Alim. 5v'
-- uses_3v3: 'Alim. 3v3'
+- uses_5v_and_3v3: 'Alimentation 5v et 3v3'
+- uses_5v: 'Alimentation 5v'
+- uses_3v3: 'Alimentation 3v3'
 - uses_n_gpio_pins: '{} broches GPIO actives'
 - bcm_pin_rev1_pi: 'broche BCM {} sur Raspi Rev 1'
 - physical_pin_n: 'broche physique {}'

From 02f442a91385619c62c8cbf47ab25d2f9340069e Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 21:02:45 +0100
Subject: [PATCH 07/16] adafruit Servo HAT has an eeprom ID

---
 src/de/translate/adafruit-servo-hat.md | 4 ++--
 src/en/overlay/adafruit-servo-hat.md   | 4 ++--
 src/es/overlay/adafruit-servo-hat.md   | 2 +-
 src/fr/translate/adafruit-servo-hat.md | 4 ++--
 src/it/translate/adafruit-servo-hat.md | 4 ++--
 src/tr/translate/adafruit-servo-hat.md | 4 ++--
 6 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/src/de/translate/adafruit-servo-hat.md b/src/de/translate/adafruit-servo-hat.md
index 0da7fee..b978229 100644
--- a/src/de/translate/adafruit-servo-hat.md
+++ b/src/de/translate/adafruit-servo-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/adafruit/Adafruit_Python_PCA9685
 buy: https://www.adafruit.com/product/2327
 image: 'adafruit-servo-hat.png'
 pincount: 40
-eeprom: no
+eeprom: yes
 power:
   '1':
 ground:
@@ -46,4 +46,4 @@ install:
 The Adafruit Servo/PWM HAT allows you to drive up to 16 servos or PWM outputs over I2C with only 2 pins.
 The on-board PWM controller will drive all 16 channels simultaneously with no additional processing overhead for the Raspberry Pi. Using a binary addressing system set by jumpers you can solder on the PCB, it is possible to stack up to 62 HATs to control up to 992 servos, using nothing more than the I2C bus.
 
-Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
\ No newline at end of file
+Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
diff --git a/src/en/overlay/adafruit-servo-hat.md b/src/en/overlay/adafruit-servo-hat.md
index 0da7fee..b978229 100644
--- a/src/en/overlay/adafruit-servo-hat.md
+++ b/src/en/overlay/adafruit-servo-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/adafruit/Adafruit_Python_PCA9685
 buy: https://www.adafruit.com/product/2327
 image: 'adafruit-servo-hat.png'
 pincount: 40
-eeprom: no
+eeprom: yes
 power:
   '1':
 ground:
@@ -46,4 +46,4 @@ install:
 The Adafruit Servo/PWM HAT allows you to drive up to 16 servos or PWM outputs over I2C with only 2 pins.
 The on-board PWM controller will drive all 16 channels simultaneously with no additional processing overhead for the Raspberry Pi. Using a binary addressing system set by jumpers you can solder on the PCB, it is possible to stack up to 62 HATs to control up to 992 servos, using nothing more than the I2C bus.
 
-Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
\ No newline at end of file
+Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
diff --git a/src/es/overlay/adafruit-servo-hat.md b/src/es/overlay/adafruit-servo-hat.md
index fc70894..1292f0b 100644
--- a/src/es/overlay/adafruit-servo-hat.md
+++ b/src/es/overlay/adafruit-servo-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/adafruit/Adafruit_Python_PCA9685
 buy: https://www.adafruit.com/product/2327
 image: 'adafruit-servo-hat.png'
 pincount: 40
-eeprom: no
+eeprom: yes
 power:
   '1':
 ground:
diff --git a/src/fr/translate/adafruit-servo-hat.md b/src/fr/translate/adafruit-servo-hat.md
index 0da7fee..b978229 100644
--- a/src/fr/translate/adafruit-servo-hat.md
+++ b/src/fr/translate/adafruit-servo-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/adafruit/Adafruit_Python_PCA9685
 buy: https://www.adafruit.com/product/2327
 image: 'adafruit-servo-hat.png'
 pincount: 40
-eeprom: no
+eeprom: yes
 power:
   '1':
 ground:
@@ -46,4 +46,4 @@ install:
 The Adafruit Servo/PWM HAT allows you to drive up to 16 servos or PWM outputs over I2C with only 2 pins.
 The on-board PWM controller will drive all 16 channels simultaneously with no additional processing overhead for the Raspberry Pi. Using a binary addressing system set by jumpers you can solder on the PCB, it is possible to stack up to 62 HATs to control up to 992 servos, using nothing more than the I2C bus.
 
-Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
\ No newline at end of file
+Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
diff --git a/src/it/translate/adafruit-servo-hat.md b/src/it/translate/adafruit-servo-hat.md
index 0da7fee..b978229 100644
--- a/src/it/translate/adafruit-servo-hat.md
+++ b/src/it/translate/adafruit-servo-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/adafruit/Adafruit_Python_PCA9685
 buy: https://www.adafruit.com/product/2327
 image: 'adafruit-servo-hat.png'
 pincount: 40
-eeprom: no
+eeprom: yes
 power:
   '1':
 ground:
@@ -46,4 +46,4 @@ install:
 The Adafruit Servo/PWM HAT allows you to drive up to 16 servos or PWM outputs over I2C with only 2 pins.
 The on-board PWM controller will drive all 16 channels simultaneously with no additional processing overhead for the Raspberry Pi. Using a binary addressing system set by jumpers you can solder on the PCB, it is possible to stack up to 62 HATs to control up to 992 servos, using nothing more than the I2C bus.
 
-Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
\ No newline at end of file
+Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
diff --git a/src/tr/translate/adafruit-servo-hat.md b/src/tr/translate/adafruit-servo-hat.md
index 0da7fee..b978229 100644
--- a/src/tr/translate/adafruit-servo-hat.md
+++ b/src/tr/translate/adafruit-servo-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/adafruit/Adafruit_Python_PCA9685
 buy: https://www.adafruit.com/product/2327
 image: 'adafruit-servo-hat.png'
 pincount: 40
-eeprom: no
+eeprom: yes
 power:
   '1':
 ground:
@@ -46,4 +46,4 @@ install:
 The Adafruit Servo/PWM HAT allows you to drive up to 16 servos or PWM outputs over I2C with only 2 pins.
 The on-board PWM controller will drive all 16 channels simultaneously with no additional processing overhead for the Raspberry Pi. Using a binary addressing system set by jumpers you can solder on the PCB, it is possible to stack up to 62 HATs to control up to 992 servos, using nothing more than the I2C bus.
 
-Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!
\ No newline at end of file
+Important note: servos can use a lot of power and it is not a good idea to use the Raspberry Pi's 5v pin to power them up. Electrical noise and 'brownouts' from excess current draw could cause your Pi to act erratically, reset and/or overheat. Keep the Pi power supply and the servos power supply completely separate!

From c48e832fc8ed65490435e2f1acacee48fd8d442c Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 22:42:21 +0100
Subject: [PATCH 08/16] es translationd r-w

---
 src/es/overlay/raspio-duino.md                | 44 +++++++++++
 .../{translate => overlay}/redbear-iot-hat.md | 12 +--
 src/es/{translate => overlay}/scroll-phat.md  |  7 +-
 src/es/overlay/sense-hat.md                   | 44 +++++++++++
 src/es/{translate => overlay}/unicorn-phat.md |  8 +-
 src/es/overlay/uugear-7port-usb-hub.md        | 27 +++++++
 src/es/overlay/uugear-witty-pi-2.md           | 66 ++++++++++++++++
 .../{translate => overlay}/uugear-witty-pi.md | 12 +--
 src/es/overlay/uugear-zero4u.md               | 23 ++++++
 src/es/overlay/wifi-pants.md                  | 77 +++++++++++++++++++
 src/es/translate/raspio-duino.md              | 44 -----------
 src/es/translate/sense-hat.md                 | 44 -----------
 src/es/translate/uugear-7port-usb-hub.md      | 27 -------
 src/es/translate/uugear-witty-pi-2.md         | 66 ----------------
 src/es/translate/uugear-zero4u.md             | 23 ------
 src/es/translate/wifi-pants.md                | 56 --------------
 16 files changed, 301 insertions(+), 279 deletions(-)
 create mode 100644 src/es/overlay/raspio-duino.md
 rename src/es/{translate => overlay}/redbear-iot-hat.md (72%)
 rename src/es/{translate => overlay}/scroll-phat.md (69%)
 create mode 100644 src/es/overlay/sense-hat.md
 rename src/es/{translate => overlay}/unicorn-phat.md (62%)
 create mode 100644 src/es/overlay/uugear-7port-usb-hub.md
 create mode 100644 src/es/overlay/uugear-witty-pi-2.md
 rename src/es/{translate => overlay}/uugear-witty-pi.md (50%)
 create mode 100644 src/es/overlay/uugear-zero4u.md
 create mode 100644 src/es/overlay/wifi-pants.md
 delete mode 100644 src/es/translate/raspio-duino.md
 delete mode 100644 src/es/translate/sense-hat.md
 delete mode 100644 src/es/translate/uugear-7port-usb-hub.md
 delete mode 100644 src/es/translate/uugear-witty-pi-2.md
 delete mode 100644 src/es/translate/uugear-zero4u.md
 delete mode 100644 src/es/translate/wifi-pants.md

diff --git a/src/es/overlay/raspio-duino.md b/src/es/overlay/raspio-duino.md
new file mode 100644
index 0000000..23dbb1c
--- /dev/null
+++ b/src/es/overlay/raspio-duino.md
@@ -0,0 +1,44 @@
+<!--
+---
+name: Duino
+class: board
+type: mcu,io
+formfactor: Custom
+manufacturer: RasPiO
+description: Arduino Programming on the Raspberry Pi
+url: http://rasp.io/duino/
+github: https://github.com/raspitv/raspio_duino
+buy: https://ryanteck.uk/add-ons/58-raspio-duino.html
+image: 'raspio-duino.png'
+pincount: 26
+eeprom: no
+power:
+  '1':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+pin:
+  '8':
+    mode: uart
+  '10':
+    mode: uart
+  '19':
+    mode: spi
+  '21':
+    mode: spi
+  '23':
+    mode: spi
+install:
+  'devices':
+    - 'spi'
+-->
+#Duino
+
+RasPiO Duino es una pequeña placa adicional para Raspberry Pi. Tiene funciones similares a Arduino Uno, con un ATMega 328P-PU como corazón, pero es completamente programable desde Raspberry Pi. Una vez programado, puede desconectarse de Raspberry Pi y usarse de manera independiente.
+
+Los pines del ATMega están dividido es grupos de tres. El ATMega328 tiene un conversor analógico a digital de 6 canales, y 14 pines digitales I/O, 6 de los cuales pueden utilizarse para PWM. Los puertos GPIO de Raspberry Pi también están disponibles además de un área de prototipado de 72 puntos raíles con tierra, 3V3 ty 5V, en los que puedes añadir tus componentes.
+
+Nota: RasPiO Duino funciona a 3v3 y 12 MHz (no 5V y 16 MHz como Uno).
diff --git a/src/es/translate/redbear-iot-hat.md b/src/es/overlay/redbear-iot-hat.md
similarity index 72%
rename from src/es/translate/redbear-iot-hat.md
rename to src/es/overlay/redbear-iot-hat.md
index fb07d91..41e1e62 100644
--- a/src/es/translate/redbear-iot-hat.md
+++ b/src/es/overlay/redbear-iot-hat.md
@@ -52,13 +52,13 @@ pin:
 -->
 #IoT pHAT
 
-The RedBear IoT pHAT brings the BCM43438 used on the Raspberry Pi 3 to pHAT format, compatible with the Pi Zero.
+IoT HAT fabricado por RedBear lleva el BCM43438 usado en Raspberry Pi 3 a formato HAT, compatible con Pi Zero.
 
-The chip supports Wi-Fi 802.11n and Bluetooth 4.1 (Dual Mode).
+El chip proporciona Wi-Fi 802.11n y Bluetooth 4.1 (Modo Dual).
 
 * Bluetooth 4.1
 * WiFi
-* Low power
-* External antenna support
-* Compatible with the same WiFi/Bluetooth software used on the Pi 3
-* Supports Pi Zero, Model A+, Model B+, Pi 2
+* Bajo consumo
+* Se puede añadir antena externa
+* Compatible con el mismo software WiFi/Bluetooth usado en Raspberry Pi 3
+* Funciona con Pi Zero, A+, B+, Pi 2
diff --git a/src/es/translate/scroll-phat.md b/src/es/overlay/scroll-phat.md
similarity index 69%
rename from src/es/translate/scroll-phat.md
rename to src/es/overlay/scroll-phat.md
index 4fc363e..f2da6cb 100644
--- a/src/es/translate/scroll-phat.md
+++ b/src/es/overlay/scroll-phat.md
@@ -45,15 +45,16 @@ install:
 -->
 #Scroll pHAT
 
-The Scroll pHAT provides a matrix of 55 white LED pixels that is ideal for writing messages, showing graphs, and drawing pictures. Perfect for RPi Zero but works with A+/B+/2 too!
+Scroll pHAT proporciona una matriz de 55 LED blancos en formato píxel que es ideal para escribir mensajes, mostrar gráficas y dibujar. Perfecto para RPi Zero pero también funciona con A+/B+/2.
 
-To get the pHAT set up and ready to go you can use the one-line product installer:
+
+Para configurar el pHAT puedes utilizar el instalador online de una línea.
 
 ```bash
 curl -sS get.pimoroni.com/scrollphat | bash
 ```
 
-Then import it into your Python script and start tinkering:
+Luego impórtalo en tu script Python y empieza a realizar proyectos:
 
 ```bash
 import scrollphat
diff --git a/src/es/overlay/sense-hat.md b/src/es/overlay/sense-hat.md
new file mode 100644
index 0000000..eecb5d3
--- /dev/null
+++ b/src/es/overlay/sense-hat.md
@@ -0,0 +1,44 @@
+<!--
+---
+name: Sense HAT
+class: board
+type: led,sensor
+formfactor: HAT
+manufacturer: Raspberry Pi
+description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
+url: https://www.raspberrypi.org/products/sense-hat/
+image: 'sense-hat.png'
+pincount: 40
+eeprom: required
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    mode: i2c
+  '5':
+    mode: i2c
+install:
+  'devices':
+    - 'i2c'
+-->
+#Sense HAT
+
+Sense HAT es una placa adicional para Raspberry Pi con una matriz led 8x8 RGB, un joystick de 5 botones y los siguientes sensores: giroscopio, acelerómetro, magnetómetro, temperatura, presión barométrica y humedad.
+
+El controlador de la matriz LED es un LED2472G conectado mediante ATTINY88 y comunicándose mediante i2c en la dirección 0x46 con la Pi. El joystick multidireccional SKRHABE010 switch/joystick se controla de manera similar.
+
+Los sensores también funcionan mediante el bus i2c:
+
+Los IUM (giroscopio, acelerómetro y magnetómetro) a trabés de LSM9DS1 en las direcciones i2c 0x1c(0x1e),0x6a(0x6b), con interrupciones en el ATTINY88.
+
+Los sensores medioambientales son un LPS25H presión+temperatura en la dirección 0x5c y un HTS221 humedad+temperatura en la dirección 0x5f del bus i2c.
diff --git a/src/es/translate/unicorn-phat.md b/src/es/overlay/unicorn-phat.md
similarity index 62%
rename from src/es/translate/unicorn-phat.md
rename to src/es/overlay/unicorn-phat.md
index 8b147d5..1eeabb3 100644
--- a/src/es/translate/unicorn-phat.md
+++ b/src/es/overlay/unicorn-phat.md
@@ -41,17 +41,17 @@ install:
 -->
 #Unicorn pHAT
 
-32 blindingly bright LEDs packed into a pHAT and driven with an ultra-fast, C library that you can talk to from Python make Unicorn HAT PiGlow's bigger, brighter brother.
+32 LEDs brillantes, cegadores, dentro de un pHAT controlado por una librería C ultrarápida con la que puedes comunicarte mediante Python hacen del Unicorn HAT el hermano mayor, más brillate de PiGlow.
 
-Note: Unicorn pHAT uses some special PWM trickery, performed with the same hardware that lets your Pi produce sound through the audio jack ( analog audio ) so you can't use both at the same time!
+Nota: Unicorn pHAT usa un truco PWM, la misma técnica que hace que tu Pi pueda reproducir sonido a través del jack de audio (sonido analógico) así que no se pueden usar a la vez.
 
-To get the HAT set up and ready to go you can use the one-line product installer:
+Para configurar el pHAT puedes utilizar el instalador online de una línea.
 
 ```bash
 curl -sS get.pimoroni.com/unicornhat | bash
 ```
 
-Then import it into your Python script and start tinkering:
+Luego impórtalo en tu script Python y empieza a realizar proyectos:
 
 ```bash
 import unicornhat
diff --git a/src/es/overlay/uugear-7port-usb-hub.md b/src/es/overlay/uugear-7port-usb-hub.md
new file mode 100644
index 0000000..dc7623e
--- /dev/null
+++ b/src/es/overlay/uugear-7port-usb-hub.md
@@ -0,0 +1,27 @@
+<!--
+---
+name: 7-port USB hub
+class: board
+type: usb
+formfactor: USB
+manufacturer: UUGear
+description: 7-port USB hub for Raspberry Pi
+url: http://www.uugear.com/product/7-port-usb-hub-for-raspberry-pi/
+buy: http://www.uugear.com/product/7-port-usb-hub-for-raspberry-pi/
+image: 'uugear-7port-usb-hub.png'
+pincount: 7
+eeprom: no
+power:
+  '2':
+ground:
+  '39':
+-->
+#7-port USB hub for Raspberry Pi
+
+Es un hub con 7 puertos USB para Raspberry Pi. Aumenta un puerto USB de Raspberry Pi en 7, lo que permite usar más dispositivos. Cuenta con un LED rojo para indicar la alimentación y 7 LEDs verdes para el tráfico en los puertos USB.
+
+Este hub es compatible con todas las versiones de Raspberry Pi, tiene el tamaño de B+/2B/3B y 6 agujeros para montaje en cualquier Raspberry Pi (excepto compute module).
+
+Para diferentes modelos de Raspberry Pi usa diferentes métodos para retroalimentar (opcional) la Raspberry Pi, lo que facilita el cableado al alimentar el hub USB y Raspberry Pi con una sola fuente de alimentación.
+
+La placa cuenta con 7 pines digitales de salida, que pueden decir si un puerto está en uso. Son de 3.3V por lo que se pueden conectar directamente a los GPIO de Raspberry Pi o a un microcontrolador externo.
diff --git a/src/es/overlay/uugear-witty-pi-2.md b/src/es/overlay/uugear-witty-pi-2.md
new file mode 100644
index 0000000..ffb2114
--- /dev/null
+++ b/src/es/overlay/uugear-witty-pi-2.md
@@ -0,0 +1,66 @@
+<!--
+---
+name: Witty Pi 2
+class: board
+type: power,rtc
+formfactor: HAT
+manufacturer: UUGear
+description: Realtime clock and power management for Raspberry Pi
+url: http://www.uugear.com/product/wittypi2/
+github: https://github.com/uugear/Witty-Pi-2
+buy: http://www.uugear.com/product/wittypi2/
+image: 'uugear-witty-pi-2.png'
+pincount: 40
+eeprom: no
+power:
+  '1':
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
+pin:
+  '3':
+    name: SDA
+    mode: i2c
+  '5':
+    name: SCL
+    mode: i2c
+  '7':
+    name: HALT
+    mode: input
+  '11':
+    name: LED
+    mode: output
+i2c:
+  '0x68':
+    name: DS3231
+    device: DS3231
+-->
+# Witty Pi 2
+
+Witty Pi 2 es la segunda generación de Witty Pi, añade reloj de tiempo real y gestión de alimentación a Raspberry Pi.
+
+Puedes encender/apagar tu Raspberry Pi con un botón de Witty Pi 2, y se desconectarán la fuente de alimentación y los periféricos USB.
+
+Witty Pi 2 tiene un reloj de tiempo real CR2032 (DS3231), que mantiene de manera precisa el tiempo de Raspberry Pi. Además, un sensor de temperatura mide la temperatura alrededor de Raspberry Pi.
+
+Se puede programar el próximo encendido/apagado mediante software, incluso secuencias complejas mediante script.
+
+Si utilizas un power bank como alimentación, puede mantener el power bank con carga debido a un bajo consumo de corriente. Los nuevos 6 pines hembra añaden opciones de integración/extensión.
+
+Puedes usar estos dos comandos para instalar sofware para Witty Pi 2:
+
+```bash
+wget http://www.uugear.com/repo/WittyPi2/installWittyPi.sh
+
+sudo sh installWittyPi.sh
+```
+Una vez realizada la instalación, reinicia tu Raspberry Pi y Witty Pi 2 estará listo.
+
+Witty Pi 2 funciona con todos los modelos de Raspberry Pi de 40 pines A+/B+/2B/3B/Zero.
diff --git a/src/es/translate/uugear-witty-pi.md b/src/es/overlay/uugear-witty-pi.md
similarity index 50%
rename from src/es/translate/uugear-witty-pi.md
rename to src/es/overlay/uugear-witty-pi.md
index 7923089..270b5e6 100644
--- a/src/es/translate/uugear-witty-pi.md
+++ b/src/es/overlay/uugear-witty-pi.md
@@ -46,19 +46,19 @@ i2c:
 -->
 #Witty Pi
 
-Witty Pi is an extension board that adds realtime clock and power management to your Raspberry Pi.
+Witty Pi es una placa adicional que añade reloj de tiempo real y gestión de alimentación a Raspberry Pi..
 
-You can turn on/off your Raspberry Pi with a single tap on the button on Witty Pi, and the power supply for Raspberry Pi and all its USB peripherals will get fully cut after the shutdown.
+Puedes encender/apagar tu Raspberry Pi con un botón de Witty Pi, y se desconectarán la fuente de alimentación y los periféricos USB.
 
-Witty Pi has a CR2032 backed realtime clock (DS1337) on board, and can keep time for Raspberry Pi when it is off. You can schedule next shutdown/startup of your Pi via the software. A user-defined schedule script could be used for complex use case, which requires scheduling multiple shutdowns and startups at different moments.
+Witty Pi tiene un reloj de tiempo real CR2032 (DS1337), que mantiene el tiempo de Raspberry Pi. Se puede programar el próximo encendido/apagado mediante software, incluso secuencias complejas mediante script.
 
-You can use the two commands below to install software for Witty Pi:
+Puedes usar estos dos comandos para instalar sofware para Witty Pi:
 
 ```bash
 wget http://www.uugear.com/repo/WittyPi/installWittyPi.sh
 
 sudo sh installWittyPi.sh
 ```
-After the installation is done, reboot your Raspberry Pi and your Witty Pi is ready to go.
+Una vez realizada la instalación, reinicia tu Raspberry Pi y Witty Pi 2 estará listo.
 
-Witty Pi supports all Raspberry Pi models that have 40-pin header, including A+, B+, 2B, 3B and Zero.
+Witty Pi funciona con todos los modelos de Raspberry Pi de 40 pines A+/B+/2B/3B/Zero.
diff --git a/src/es/overlay/uugear-zero4u.md b/src/es/overlay/uugear-zero4u.md
new file mode 100644
index 0000000..ee85e4c
--- /dev/null
+++ b/src/es/overlay/uugear-zero4u.md
@@ -0,0 +1,23 @@
+<!--
+---
+name: Zero4U
+class: board
+type: usb
+formfactor: USB
+manufacturer: UUGear
+description: 4-port USB hub for Raspberry Pi Zero
+url: http://www.uugear.com/product/zero4u/
+buy: http://www.uugear.com/product/zero4u/
+image: 'uugear-zero4u.png'
+pincount: 4
+eeprom: no
+-->
+#Zero4U
+
+Zero4U es un hub USB de 4 puertos par Raspberry Pi Zero y puede montarse directamente en Raspberry Pi Zero. Los 4 pines pogo en la parte trasera se conectarán a los pads PP1, PP6, PP22 y PP23 de Raspberry Pi Zero, por lo que no se necesita soldar para que funcione.
+
+El hub USB se alimentará directamente de Raspberry Pi Zero, por lo que no necesita otra fuente de alimentación. Sin embargo, cuenta con un conector JST XH2.54 para una fuente de alimentación alternativa.
+
+Cuenta con un LED azul como indicador de la alimentación y cuatro LED blancos para indicar el tráfico en los puertos USB.
+
+Este hub USB puede funcionar con otros ordenadores. Puedes usar un cable USB para conectar el puerto mini-USB de la placa con el puerto USB de un ordenador.
diff --git a/src/es/overlay/wifi-pants.md b/src/es/overlay/wifi-pants.md
new file mode 100644
index 0000000..1746954
--- /dev/null
+++ b/src/es/overlay/wifi-pants.md
@@ -0,0 +1,77 @@
+<!--
+---
+name: WiringPi
+class: interface
+type: pinout
+url: http://wiringpi.com
+github: https://github.com/WiringPi/WiringPi2-Python
+pincount: 40
+pin:
+  '3':
+    name: WiringPi 8
+  '5':
+    name: WiringPi 9
+  '7':
+    name: WiringPi 7
+  '8':
+    name: WiringPi 15
+  '10':
+    name: WiringPi 16
+  '11':
+    name: WiringPi 0
+  '12':
+    name: WiringPi 1
+  '13':
+    name: WiringPi 2
+  '15':
+    name: WiringPi 3
+  '16':
+    name: WiringPi 4
+  '18':
+    name: WiringPi 5
+  '19':
+    name: WiringPi 12
+  '21':
+    name: WiringPi 13
+  '22':
+    name: WiringPi 6
+  '23':
+    name: WiringPi 14
+  '24':
+    name: WiringPi 10
+  '26':
+    name: WiringPi 11
+  '29':
+    name: WiringPi 21
+  '31':
+    name: WiringPi 22
+  '32':
+    name: WiringPi 26
+  '33':
+    name: WiringPi 23
+  '35':
+    name: WiringPi 24
+  '36':
+    name: WiringPi 27
+  '37':
+    name: WiringPi 25
+  '38':
+    name: WiringPi 28
+  '40':
+    name: WiringPi 29
+-->
+#WiFi Pants
+
+WiFi Pants es una placa adicional para Raspberry Pi con WiFi y alimentación de 5V, basada en ESP-12F.
+
+Encaja perfectamente con Pi Zero, pese a un pequeño saliente para la antena, y sólo necesita 6 puertos GPIO.
+
+Se comunica a través de la interfaz SDIO para dar capacidades WiFi como alternativa a los adaptadores WiFi USB. Es útil para proyectos de poco ancho de banda, como la mayoría de los proyectos incrustados.
+
+Lo más destacable, WiFI Pants añade WiFi a Pi Zero dejando libre el puerto USB y permite usar cualquier batería de hasta 3V ya que la aumenta a 5V y 2A para alimentar la Pi y otros periféricos.
+
+Incluye un conector JST-PH compatible con las baterías de Sparkfun y Adafruit. Su mecanismo de seguridad evita la descarga más allá de 2.7V. Un interruptor permite a un microcontrolador encender o apagar la fuente de alimentación.
+
+Además del interruptor, los 5 pines dan acceso al puerto serie de Raspberry Pi, ideal para proyectos IoT donde no hay pantalla pero es necesario acceso a terminal para la puesta a punto. Estos pines pueden conectarse a un cable FTDI USB-to-UART de 6 pines.
+
+WiFi Pants también funciona perfectamente con Pi A+/B+/2.
diff --git a/src/es/translate/raspio-duino.md b/src/es/translate/raspio-duino.md
deleted file mode 100644
index 9b175ee..0000000
--- a/src/es/translate/raspio-duino.md
+++ /dev/null
@@ -1,44 +0,0 @@
-<!--
----
-name: Duino
-class: board
-type: mcu,io
-formfactor: Custom
-manufacturer: RasPiO
-description: Arduino Programming on the Raspberry Pi
-url: http://rasp.io/duino/
-github: https://github.com/raspitv/raspio_duino
-buy: https://ryanteck.uk/add-ons/58-raspio-duino.html
-image: 'raspio-duino.png'
-pincount: 26
-eeprom: no
-power:
-  '1':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-pin:
-  '8':
-    mode: uart
-  '10':
-    mode: uart
-  '19':
-    mode: spi
-  '21':
-    mode: spi
-  '23':
-    mode: spi
-install:
-  'devices':
-    - 'spi'
--->
-#Duino
-
-The RasPiO Duino is a small plug-on board for Raspberry Pi. It has similar functionality to an Arduino Uno, with an ATMega 328P-PU at its heart, but is fully programmable from the Raspberry Pi. Once programmed, it can be removed from the Pi and used on its own.
-
-Pins on the ATMega are broken out to a cluster of three holes. The ATMega328 features a 6 channel analog to digital converter and 14 digital I/O pins, 6 of which can also be used for PWM. The Pi’s GPIO ports are also broken out on the board as well and there is a 72 point prototyping area, with GND, 3V3 and 5V rails, where you can add your own components.
-
-Note: the RasPiO Duino runs on 3v3 at 12 MHz (not 5V at 16 MHz like the Uno).
\ No newline at end of file
diff --git a/src/es/translate/sense-hat.md b/src/es/translate/sense-hat.md
deleted file mode 100644
index 3bdf12e..0000000
--- a/src/es/translate/sense-hat.md
+++ /dev/null
@@ -1,44 +0,0 @@
-<!--
----
-name: Sense HAT
-class: board
-type: led,sensor
-formfactor: HAT
-manufacturer: Raspberry Pi
-description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
-url: https://www.raspberrypi.org/products/sense-hat/
-image: 'sense-hat.png'
-pincount: 40
-eeprom: required
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    mode: i2c
-  '5':
-    mode: i2c
-install:
-  'devices':
-    - 'i2c'
--->
-#Sense HAT
-
-The Sense HAT is an add-on board for Raspberry Pi comprising of a 8×8 RGB LED matrix, a five-button joystick and the following sensors: Gyroscope, Accelerometer, Magnetometer, Temperature, Barometric pressure and Humidity.
-
-The shift register driving the LED Matrix is a LED2472G connected via an ATTINY88 communicating via i2c at address 0x46 with the Pi. The Multi-Directional SKRHABE010 Switch/Joystick is similarly controlled.
-
-The sensors themselves also operate over the i2c bus:
-
-The IMU (Gyroscope, Accelerometer, Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e),0x6a(0x6b), with Interrupts on the ATTINY88.
-
-Environmental sensors are represented by a LPS25H Pressure+Temperature sensor at address 0x5c and by a HTS221 Humidity+Temp sensor at 0x5f on the i2c bus.
diff --git a/src/es/translate/uugear-7port-usb-hub.md b/src/es/translate/uugear-7port-usb-hub.md
deleted file mode 100644
index b52a4a7..0000000
--- a/src/es/translate/uugear-7port-usb-hub.md
+++ /dev/null
@@ -1,27 +0,0 @@
-<!--
----
-name: 7-port USB hub
-class: board
-type: usb
-formfactor: USB
-manufacturer: UUGear
-description: 7-port USB hub for Raspberry Pi
-url: http://www.uugear.com/product/7-port-usb-hub-for-raspberry-pi/
-buy: http://www.uugear.com/product/7-port-usb-hub-for-raspberry-pi/
-image: 'uugear-7port-usb-hub.png'
-pincount: 7
-eeprom: no
-power:
-  '2':
-ground:
-  '39':
--->
-#7-port USB hub for Raspberry Pi
-
-This is a 7-Port USB hub designed for Raspberry Pi. It extends one USB port on Raspberry Pi to 7 usable USB ports, which allows you to connect much more USB devices to your Raspberry Pi. There is a red LED on board as the power indicator, and seven green LEDs aside the USB ports as transaction indicators.
-
-This USB hub is compatible with all versions of Raspberry Pi, including the old A/B model, A+/B+ model, compute module (with development kit), Raspberry Pi 2 (B model), Raspberry Pi Zero and Raspberry Pi 3 (B model). The board size of this USB hub is the same with Raspberry Pi B+ or Raspberry Pi 2/3 (B model). The old Raspberry Pi A and B model also have the same size, except that they don’t have those rounded corners. This USB hub has 6 mounting holes at correct positions and could be mounted under any Raspberry Pi model except the compute module.
-
-For different models of Raspberry Pi, this USB hub uses different approaches to (optionally) back-power the Raspberry Pi, which significantly simplifies your wiring and allows you to power both the USB hub and Raspberry Pi with only one power supply.
-
-There are also 7 digital output pins on board, which can tell whether a USB port is in used. These output pins are in 3.3V level and can be directly connected to Raspberry Pi’s GPIO pin, or connected to an external microcontroller.
diff --git a/src/es/translate/uugear-witty-pi-2.md b/src/es/translate/uugear-witty-pi-2.md
deleted file mode 100644
index d7339b4..0000000
--- a/src/es/translate/uugear-witty-pi-2.md
+++ /dev/null
@@ -1,66 +0,0 @@
-<!--
----
-name: Witty Pi 2
-class: board
-type: power,rtc
-formfactor: HAT
-manufacturer: UUGear
-description: Realtime clock and power management for Raspberry Pi
-url: http://www.uugear.com/product/wittypi2/
-github: https://github.com/uugear/Witty-Pi-2
-buy: http://www.uugear.com/product/wittypi2/
-image: 'uugear-witty-pi-2.png'
-pincount: 40
-eeprom: no
-power:
-  '1':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '3':
-    name: SDA
-    mode: i2c
-  '5':
-    name: SCL
-    mode: i2c
-  '7':
-    name: HALT
-    mode: input
-  '11':
-    name: LED
-    mode: output
-i2c:
-  '0x68':
-    name: DS3231
-    device: DS3231
--->
-# Witty Pi 2
-
-Witty Pi 2 is the second generation of Witty Pi, which adds realtime clock and power management to your Raspberry Pi.
-
-You can turn on/off your Raspberry Pi with a single tap on the button on Witty Pi 2, and the power supply for Raspberry Pi and all its USB peripherals will get fully cut after the shutdown.
-
-Witty Pi 2 has a CR2032 backed realtime clock (DS3231) on board, and can accurately keep time for Raspberry Pi. The built-in temperature sensor can tell the temperature around your Raspberry Pi too.
-
-You can schedule next shutdown/startup of your Pi via the software. Complex ON/OFF sequence for Raspberry Pi can be achieved by applying a user-defined schedule script.
-
-If you are using power bank as power supply, the new dummy load feature can keep power bank alive with low current consumption. The newly added 6-pin female header breaks out some important signals for integration/extension.
-
-You can use the two commands below to install software for Witty Pi 2:
-
-```bash
-wget http://www.uugear.com/repo/WittyPi2/installWittyPi.sh
-
-sudo sh installWittyPi.sh
-```
-After the installation is done, reboot your Raspberry Pi and your Witty Pi 2 is ready to go.
-
-Witty Pi 2 supports all Raspberry Pi models that have 40-pin header, including A+, B+, 2B, 3B and Zero.
diff --git a/src/es/translate/uugear-zero4u.md b/src/es/translate/uugear-zero4u.md
deleted file mode 100644
index e5c945c..0000000
--- a/src/es/translate/uugear-zero4u.md
+++ /dev/null
@@ -1,23 +0,0 @@
-<!--
----
-name: Zero4U
-class: board
-type: usb
-formfactor: USB
-manufacturer: UUGear
-description: 4-port USB hub for Raspberry Pi Zero
-url: http://www.uugear.com/product/zero4u/
-buy: http://www.uugear.com/product/zero4u/
-image: 'uugear-zero4u.png'
-pincount: 4
-eeprom: no
--->
-#Zero4U
-
-Zero4U is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back. The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on Raspberry Pi Zero, hence no soldering will be needed to make it work.
-
-The USB hub will take power directly from your Raspberry Pi Zero, so you don’t need to power the USB hub separately. However you can use the JST XH2.54 connector on board as the alternative power input.
-
-There are one blue LED on board as the power indicator, and four white LED aside the USB ports as transaction indicators.
-
-This USB hub can also work with other types of computer. You can use a USB cable to connect the mini-USB port on board to a USB port on the computer.
diff --git a/src/es/translate/wifi-pants.md b/src/es/translate/wifi-pants.md
deleted file mode 100644
index 4b242a8..0000000
--- a/src/es/translate/wifi-pants.md
+++ /dev/null
@@ -1,56 +0,0 @@
-<!--
----
-name: WiFi Pants
-class: board
-type: power, iot
-formfactor: pHAT
-manufacturer: SLNGadget
-description: WiFi and battery power for the Raspberry Pi
-url: https://hackaday.io/project/8678-rpi-wifi
-github: https://github.com/al177/esp_hat
-buy: https://www.tindie.com/products/ajlitt/wifi-power-pants/
-image: 'wifi-pants.png'
-pincount: 40
-eeprom: no
-power:
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '13':
-    name: ESP GPIO10
-  '15':
-    name: ESP SCLK
-  '16':
-    name: ESP CSO
-  '18':
-    name: ESP MISO
-  '22':
-    name: ESP MOSI
-  '27':
-    name: ESP CH_PD
-  '37':
-    name: ESP GPIO9
--->
-#WiFi Pants
-
-WiFi Pants is a WiFi and 5V boost power supply add-on board for your Raspberry Pi based around the ESP-12F.
-
-The WiFi Pants board fits the outline of the Pi Zero, with only a small protrusion for the antenna, and only six GPIOs are needed on the Pi's expansion connector.
-
-It communicates over the SDIO interface to provide WiFi capability for a direct alternative to a USB WiFi adapter for low-bandwidth applications, sufficient in most embedded projects.
-
-Most notably, WiFi Pants can add WiFi to a Pi Zero while leaving the USB port free, and boosts any battery from as low as 3V to 5V at up to 2A to power the Pi and any other add-ons.
-
-A JST-PH connector compatible with Sparkfun and Adafruit battery packs is included with the board. An undervoltage lock-out prevents batteries from draining below 2.7V. A soft power switch input lets a microcontroller or switch easily turn off or on the power supply.
-
-Along with the soft power switch input, the 5 pin header exposes the Raspberry Pi's serial console, great for IoT projects where there is no screen but shell access is needed for setup. The header fits the 6 pin FTDI USB-to-UART cable.
-
-WiFi Pants also works great with the Pi A+, B+, and 2 models.
\ No newline at end of file

From 6918ec1a94598227785806f5bb51fc200b18a12b Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 23:11:32 +0100
Subject: [PATCH 09/16] additional tweaks to es

---
 src/es/overlay/raspio-duino.md |   2 +-
 src/es/overlay/wifi-pants.md   |  81 ++++++++--------------
 src/es/template/layout.html    | 123 ++++++++++++++++-----------------
 3 files changed, 92 insertions(+), 114 deletions(-)

diff --git a/src/es/overlay/raspio-duino.md b/src/es/overlay/raspio-duino.md
index 23dbb1c..21215af 100644
--- a/src/es/overlay/raspio-duino.md
+++ b/src/es/overlay/raspio-duino.md
@@ -3,7 +3,7 @@
 name: Duino
 class: board
 type: mcu,io
-formfactor: Custom
+formfactor: Otro
 manufacturer: RasPiO
 description: Arduino Programming on the Raspberry Pi
 url: http://rasp.io/duino/
diff --git a/src/es/overlay/wifi-pants.md b/src/es/overlay/wifi-pants.md
index 1746954..147dff9 100644
--- a/src/es/overlay/wifi-pants.md
+++ b/src/es/overlay/wifi-pants.md
@@ -1,64 +1,43 @@
 <!--
 ---
-name: WiringPi
-class: interface
-type: pinout
-url: http://wiringpi.com
-github: https://github.com/WiringPi/WiringPi2-Python
+name: WiFi Pants
+class: board
+type: power, iot
+formfactor: pHAT
+manufacturer: SLNGadget
+description: WiFi and battery power for the Raspberry Pi
+url: https://hackaday.io/project/8678-rpi-wifi
+github: https://github.com/al177/esp_hat
+buy: https://www.tindie.com/products/ajlitt/wifi-power-pants/
+image: 'wifi-pants.png'
 pincount: 40
+eeprom: no
+power:
+  '2':
+ground:
+  '6':
+  '9':
+  '14':
+  '20':
+  '25':
+  '30':
+  '34':
+  '39':
 pin:
-  '3':
-    name: WiringPi 8
-  '5':
-    name: WiringPi 9
-  '7':
-    name: WiringPi 7
-  '8':
-    name: WiringPi 15
-  '10':
-    name: WiringPi 16
-  '11':
-    name: WiringPi 0
-  '12':
-    name: WiringPi 1
   '13':
-    name: WiringPi 2
+    name: ESP GPIO10
   '15':
-    name: WiringPi 3
+    name: ESP SCLK
   '16':
-    name: WiringPi 4
+    name: ESP CSO
   '18':
-    name: WiringPi 5
-  '19':
-    name: WiringPi 12
-  '21':
-    name: WiringPi 13
+    name: ESP MISO
   '22':
-    name: WiringPi 6
-  '23':
-    name: WiringPi 14
-  '24':
-    name: WiringPi 10
-  '26':
-    name: WiringPi 11
-  '29':
-    name: WiringPi 21
-  '31':
-    name: WiringPi 22
-  '32':
-    name: WiringPi 26
-  '33':
-    name: WiringPi 23
-  '35':
-    name: WiringPi 24
-  '36':
-    name: WiringPi 27
+    name: ESP MOSI
+  '27':
+    name: ESP CH_PD
   '37':
-    name: WiringPi 25
-  '38':
-    name: WiringPi 28
-  '40':
-    name: WiringPi 29
+    name: ESP GPIO9
 -->
 #WiFi Pants
 
diff --git a/src/es/template/layout.html b/src/es/template/layout.html
index 161f3a7..8c17dcd 100755
--- a/src/es/template/layout.html
+++ b/src/es/template/layout.html
@@ -1,69 +1,68 @@
 <!doctype html>
 <html lang="{{langcode}}">
-	<head>
-		<meta http-equiv="content-type" content="text/html;charset=utf-8" />
-		<title>{{title}}</title>
-		<meta name="description" content="{{description}}" />
-		<link href='//fonts.googleapis.com/css?family=Ubuntu+Mono' rel='stylesheet' type='text/css' />
-		<link href='{{resource_url}}prettify/prettify.css' rel='stylesheet' />
-		<link href="//netdna.bootstrapcdn.com/font-awesome/3.2.1/css/font-awesome.css" rel="stylesheet">
-		<link href="{{resource_url}}pinout.css?v={{v}}" rel="stylesheet">
-		<link href="{{resource_url}}print.css?v={{v}}" rel="stylesheet" media="print">
-		<link rel="stylesheet" href="//maxcdn.bootstrapcdn.com/font-awesome/4.3.0/css/font-awesome.min.css">
-		{{hreflang}}
-		<script>
-		  (function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
-		  (i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
-		  m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
-		  })(window,document,'script','//www.google-analytics.com/analytics.js','ga');
+    <head>
+        <meta http-equiv="content-type" content="text/html;charset=utf-8" />
+        <title>{{title}}</title>
+        <meta name="description" content="{{description}}" />
+        <link href='//fonts.googleapis.com/css?family=Ubuntu+Mono' rel='stylesheet' type='text/css' />
+        <link href='{{resource_url}}prettify/prettify.css' rel='stylesheet' />
+        <link href="//netdna.bootstrapcdn.com/font-awesome/3.2.1/css/font-awesome.css" rel="stylesheet">
+        <link href="{{resource_url}}pinout.css?v={{v}}" rel="stylesheet">
+        <link href="{{resource_url}}print.css?v={{v}}" rel="stylesheet" media="print">
+        <link rel="stylesheet" href="//maxcdn.bootstrapcdn.com/font-awesome/4.3.0/css/font-awesome.min.css">
+        {{hreflang}}
+        <script>
+          (function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
+          (i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
+          m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
+          })(window,document,'script','//www.google-analytics.com/analytics.js','ga');
 
-		  ga('create', 'UA-69846516-5', 'auto');
-		  ga('send', 'pageview');
+          ga('create', 'UA-69846516-5', 'auto');
+          ga('send', 'pageview');
 
-		</script>
-	</head>
-	<body>
-		<div id="container">
-			<h1 class="logo"><a title="Raspberry Pi GPIO Pinout home" href="/"><img src="{{resource_url}}pinout-logo.png" style="top:8px;" /><span>Raspberry Pi</span>n<span class="out">out</span></a></h1>
-			<div id="leftcolumn">
-			<nav id="gpio">
-				<div id="pinbase"></div>
-				{{nav}}
-			</nav>
-			</div>
-			<div id="content">
-				<div id="featured">
-					<ul>
-					{{featured_boards}}
-					</ul>
-					<a class="more" href="/boards">See more HATs, pHATs and add-ons</a>
-				</div>
-				<div id="interfaces">
-					<ul>
-					{{nav_html_interface}}
-					</ul>
-				</div>
-				<div id="pages">
-					{{content}}
-				</div>
-				<div id="lang">
-					<ul class="lang-nav">
-						{{lang_links}}
-					</ul>
-				</div>
-			</div>
-			<div class="footer" style="clear: both;padding: 20px 0px;text-align:center;">
-				<p>Originally part of <a href="http://pi.gadgetoid.com">pi.gadgetoid.com</a></p>
-				<p>Maintained by <a href="https://twitter.com/gadgetoid"><i class="fa fa-twitter"></i> @Gadgetoid</a> and <a href="https://twitter.com/roguehal13"><i class="fa fa-twitter"></i> @RogueHAL13</a></p>
-				<p>Translation <a href="https://github.com/ResonantWave">@ResonantWave</a></p>
-				</ul>
-			</div>
-		</div>
+        </script>
+    </head>
+    <body>
+        <div id="container">
+            <h1 class="logo"><a title="Raspberry Pi GPIO Pinout home" href="/"><img src="{{resource_url}}pinout-logo.png" style="top:8px;" /><span>Raspberry Pi</span>n<span class="out">out</span></a></h1>
+            <div id="leftcolumn">
+            <nav id="gpio">
+                <div id="pinbase"></div>
+                {{nav}}
+            </nav>
+            </div>
+            <div id="content">
+                <div id="featured">
+                    <ul>
+                    {{featured_boards}}
+                    </ul>
+                    <a class="more" href="/boards">See more HATs, pHATs and add-ons</a>
+                </div>
+                <div id="interfaces">
+                    <ul>
+                    {{nav_html_interface}}
+                    </ul>
+                </div>
+                <div id="pages">
+                    {{content}}
+                </div>
+                <div id="lang">
+                    <ul class="lang-nav">
+                        {{lang_links}}
+                    </ul>
+                </div>
+            </div>
+            <div class="footer" style="clear: both;padding: 20px 0px;text-align:center;">
+                <p>Webmasters<a href="https://twitter.com/gadgetoid"><i class="fa fa-twitter"></i> @Gadgetoid</a> and <a href="https://twitter.com/roguehal13"><i class="fa fa-twitter"></i> @RogueHAL13</a></p>
+                <p>Traducion <a href="https://github.com/ResonantWave">@ResonantWave</a> y <a href="https://github.com/IkerGarcia">@IkerGarcia</a></p>
+                </ul>
+            </div>
+        </div>
 
-		<script type="text/javascript" src="//cdn.jsdelivr.net/jquery/1.9.1/jquery-1.9.1.min.js"></script>
-		<script type="text/javascript" src="//cdn.jsdelivr.net/prettify/0.1/prettify.js"></script>
-    	<script src='{{resource_url}}prettify/lang-ruby.js'></script>
-    	<script src='{{resource_url}}prettify/lang-bash.js'></script>
-		<script src='{{resource_url}}pinout.js?v={{v}}'></script>
+        <script type="text/javascript" src="//cdn.jsdelivr.net/jquery/1.9.1/jquery-1.9.1.min.js"></script>
+        <script type="text/javascript" src="//cdn.jsdelivr.net/prettify/0.1/prettify.js"></script>
+        <script src='{{resource_url}}prettify/lang-ruby.js'></script>
+        <script src='{{resource_url}}prettify/lang-bash.js'></script>
+        <script src='{{resource_url}}pinout.js?v={{v}}'></script>
 </body>
 </html>

From 79c4c5ad96b46e2071d774b909ceeb2d7c0d6c49 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 23:18:16 +0100
Subject: [PATCH 10/16] Red Bear github added

---
 src/de/translate/redbear-iot-hat.md | 2 +-
 src/en/overlay/redbear-iot-hat.md   | 2 +-
 src/es/overlay/redbear-iot-hat.md   | 2 +-
 src/fr/translate/redbear-iot-hat.md | 2 +-
 src/it/translate/redbear-iot-hat.md | 2 +-
 src/tr/translate/redbear-iot-hat.md | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/src/de/translate/redbear-iot-hat.md b/src/de/translate/redbear-iot-hat.md
index fb07d91..9bd338c 100644
--- a/src/de/translate/redbear-iot-hat.md
+++ b/src/de/translate/redbear-iot-hat.md
@@ -7,7 +7,7 @@ formfactor: pHAT
 manufacturer: RedBear
 description: A Wi-Fi + Bluetooth add-on board for the Pi Zero
 url: https://www.kickstarter.com/projects/1991736672/iot-hat-for-raspberry-pi-a-must-have-for-pi-zero
-github:
+github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
diff --git a/src/en/overlay/redbear-iot-hat.md b/src/en/overlay/redbear-iot-hat.md
index fb07d91..9bd338c 100644
--- a/src/en/overlay/redbear-iot-hat.md
+++ b/src/en/overlay/redbear-iot-hat.md
@@ -7,7 +7,7 @@ formfactor: pHAT
 manufacturer: RedBear
 description: A Wi-Fi + Bluetooth add-on board for the Pi Zero
 url: https://www.kickstarter.com/projects/1991736672/iot-hat-for-raspberry-pi-a-must-have-for-pi-zero
-github:
+github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
diff --git a/src/es/overlay/redbear-iot-hat.md b/src/es/overlay/redbear-iot-hat.md
index 41e1e62..b88852f 100644
--- a/src/es/overlay/redbear-iot-hat.md
+++ b/src/es/overlay/redbear-iot-hat.md
@@ -7,7 +7,7 @@ formfactor: pHAT
 manufacturer: RedBear
 description: A Wi-Fi + Bluetooth add-on board for the Pi Zero
 url: https://www.kickstarter.com/projects/1991736672/iot-hat-for-raspberry-pi-a-must-have-for-pi-zero
-github:
+github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
diff --git a/src/fr/translate/redbear-iot-hat.md b/src/fr/translate/redbear-iot-hat.md
index fb07d91..9bd338c 100644
--- a/src/fr/translate/redbear-iot-hat.md
+++ b/src/fr/translate/redbear-iot-hat.md
@@ -7,7 +7,7 @@ formfactor: pHAT
 manufacturer: RedBear
 description: A Wi-Fi + Bluetooth add-on board for the Pi Zero
 url: https://www.kickstarter.com/projects/1991736672/iot-hat-for-raspberry-pi-a-must-have-for-pi-zero
-github:
+github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
diff --git a/src/it/translate/redbear-iot-hat.md b/src/it/translate/redbear-iot-hat.md
index fb07d91..9bd338c 100644
--- a/src/it/translate/redbear-iot-hat.md
+++ b/src/it/translate/redbear-iot-hat.md
@@ -7,7 +7,7 @@ formfactor: pHAT
 manufacturer: RedBear
 description: A Wi-Fi + Bluetooth add-on board for the Pi Zero
 url: https://www.kickstarter.com/projects/1991736672/iot-hat-for-raspberry-pi-a-must-have-for-pi-zero
-github:
+github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
diff --git a/src/tr/translate/redbear-iot-hat.md b/src/tr/translate/redbear-iot-hat.md
index fb07d91..9bd338c 100644
--- a/src/tr/translate/redbear-iot-hat.md
+++ b/src/tr/translate/redbear-iot-hat.md
@@ -7,7 +7,7 @@ formfactor: pHAT
 manufacturer: RedBear
 description: A Wi-Fi + Bluetooth add-on board for the Pi Zero
 url: https://www.kickstarter.com/projects/1991736672/iot-hat-for-raspberry-pi-a-must-have-for-pi-zero
-github:
+github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40

From 093d140ac18967fb348458b7826179ca23b6c414 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 23:21:10 +0100
Subject: [PATCH 11/16] RB IoT pHAT has dtb on EEPROM

---
 src/de/translate/redbear-iot-hat.md | 2 +-
 src/en/overlay/redbear-iot-hat.md   | 2 +-
 src/es/overlay/redbear-iot-hat.md   | 2 +-
 src/fr/translate/redbear-iot-hat.md | 2 +-
 src/it/translate/redbear-iot-hat.md | 2 +-
 src/tr/translate/redbear-iot-hat.md | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/src/de/translate/redbear-iot-hat.md b/src/de/translate/redbear-iot-hat.md
index 9bd338c..938587b 100644
--- a/src/de/translate/redbear-iot-hat.md
+++ b/src/de/translate/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/en/overlay/redbear-iot-hat.md b/src/en/overlay/redbear-iot-hat.md
index 9bd338c..938587b 100644
--- a/src/en/overlay/redbear-iot-hat.md
+++ b/src/en/overlay/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/es/overlay/redbear-iot-hat.md b/src/es/overlay/redbear-iot-hat.md
index b88852f..a6a7853 100644
--- a/src/es/overlay/redbear-iot-hat.md
+++ b/src/es/overlay/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/fr/translate/redbear-iot-hat.md b/src/fr/translate/redbear-iot-hat.md
index 9bd338c..938587b 100644
--- a/src/fr/translate/redbear-iot-hat.md
+++ b/src/fr/translate/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/it/translate/redbear-iot-hat.md b/src/it/translate/redbear-iot-hat.md
index 9bd338c..938587b 100644
--- a/src/it/translate/redbear-iot-hat.md
+++ b/src/it/translate/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: required
 power:
   '1':
   '2':
diff --git a/src/tr/translate/redbear-iot-hat.md b/src/tr/translate/redbear-iot-hat.md
index 9bd338c..938587b 100644
--- a/src/tr/translate/redbear-iot-hat.md
+++ b/src/tr/translate/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: required
 power:
   '1':
   '2':

From cc17ef9d6b2987a05ecf7170ee4b6e712466f32b Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Wed, 26 Oct 2016 23:52:01 +0100
Subject: [PATCH 12/16] fixed Traffic HAT links

---
 src/de/overlay/traffic-hat.md   | 6 +++---
 src/en/overlay/traffic-hat.md   | 4 ++--
 src/es/overlay/traffic-hat.md   | 4 ++--
 src/fr/overlay/traffic-hat.md   | 4 ++--
 src/it/overlay/traffic-hat.md   | 6 +++---
 src/tr/translate/traffic-hat.md | 4 ++--
 6 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/src/de/overlay/traffic-hat.md b/src/de/overlay/traffic-hat.md
index 3ddd220..3a80ab1 100644
--- a/src/de/overlay/traffic-hat.md
+++ b/src/de/overlay/traffic-hat.md
@@ -6,8 +6,8 @@ type: alle
 formfactor: HAT
 manufacturer: Ryanteck
 description: Ein schneller und einfacher Weg um die grundlegenden Fähigkeiten der GPIO-Ports zu erkunden.
-url: http://www.ryanteck.uk/store/traffichat
-buy: http://www.ryanteck.uk/store/traffichat
+url: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
+buy: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
 image: 'traffic-hat.png'
 pincount: 40
 eeprom: yes
@@ -53,4 +53,4 @@ IO.setup(5,IO.OUT)
 
 #Button
 IO.setup(25,IO.IN,pull_up_down=IO.PUD_UP)
-```
\ No newline at end of file
+```
diff --git a/src/en/overlay/traffic-hat.md b/src/en/overlay/traffic-hat.md
index da79436..0946732 100644
--- a/src/en/overlay/traffic-hat.md
+++ b/src/en/overlay/traffic-hat.md
@@ -6,8 +6,8 @@ type: multi
 formfactor: HAT
 manufacturer: Ryanteck
 description: A quick and easy way to learn the basics of GPIO on a budget
-url: http://www.ryanteck.uk/store/traffichat
-buy: http://www.ryanteck.uk/store/traffichat
+url: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
+buy: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
 image: 'traffic-hat.png'
 pincount: 40
 eeprom: yes
diff --git a/src/es/overlay/traffic-hat.md b/src/es/overlay/traffic-hat.md
index 86115ad..9a7cc42 100644
--- a/src/es/overlay/traffic-hat.md
+++ b/src/es/overlay/traffic-hat.md
@@ -6,8 +6,8 @@ type: multi
 formfactor: HAT
 manufacturer: Ryanteck
 description: Una manera rápida de aprender lo básico del GPIO con un bajo presupuesto. Todo en un bonito HAT.
-url: http://www.ryanteck.uk/store/traffichat
-buy: http://www.ryanteck.uk/store/traffichat
+url: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
+buy: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
 image: 'traffic-hat.png'
 pincount: 40
 eeprom: yes
diff --git a/src/fr/overlay/traffic-hat.md b/src/fr/overlay/traffic-hat.md
index 9f3c677..45690fe 100644
--- a/src/fr/overlay/traffic-hat.md
+++ b/src/fr/overlay/traffic-hat.md
@@ -6,8 +6,8 @@ type: multi
 formfactor: HAT
 manufacturer: Ryanteck
 description: carte multi-usage avec buzzer, LED et bouton
-url: http://www.ryanteck.uk/store/traffichat
-buy: http://www.ryanteck.uk/store/traffichat
+url: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
+buy: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
 image: 'traffic-hat.png'
 pincount: 40
 eeprom: yes
diff --git a/src/it/overlay/traffic-hat.md b/src/it/overlay/traffic-hat.md
index d17fa09..1d765f5 100644
--- a/src/it/overlay/traffic-hat.md
+++ b/src/it/overlay/traffic-hat.md
@@ -6,8 +6,8 @@ type: Tutti
 formfactor: HAT
 manufacturer: Ryanteck
 description: Una maniera facile e veloce per imparare le basi del GPIO a basso prezzo. Tutto in un singolo HAT.
-url: http://www.ryanteck.uk/store/traffichat
-buy: http://www.ryanteck.uk/store/traffichat
+url: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
+buy: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
 image: 'traffic-hat.png'
 pincount: 40
 eeprom: yes
@@ -53,4 +53,4 @@ IO.setup(5,IO.OUT)
 
 #Bottone
 IO.setup(25,IO.IN,pull_up_down=IO.PUD_UP)
-```
\ No newline at end of file
+```
diff --git a/src/tr/translate/traffic-hat.md b/src/tr/translate/traffic-hat.md
index da79436..0946732 100644
--- a/src/tr/translate/traffic-hat.md
+++ b/src/tr/translate/traffic-hat.md
@@ -6,8 +6,8 @@ type: multi
 formfactor: HAT
 manufacturer: Ryanteck
 description: A quick and easy way to learn the basics of GPIO on a budget
-url: http://www.ryanteck.uk/store/traffichat
-buy: http://www.ryanteck.uk/store/traffichat
+url: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
+buy: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
 image: 'traffic-hat.png'
 pincount: 40
 eeprom: yes

From f3aa6c63d65ebb32bcfdd21d836017bad35c3aa6 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Thu, 27 Oct 2016 00:19:41 +0100
Subject: [PATCH 13/16] changed required to setup + new detect tag

---
 src/de/overlay/unicorn-hat.md       | 2 +-
 src/de/translate/pijack.md          | 2 +-
 src/de/translate/redbear-iot-hat.md | 2 +-
 src/de/translate/sense-hat.md       | 2 +-
 src/en/overlay/pijack.md            | 2 +-
 src/en/overlay/redbear-iot-hat.md   | 2 +-
 src/en/overlay/sense-hat.md         | 2 +-
 src/en/overlay/unicorn-hat.md       | 2 +-
 src/es/overlay/redbear-iot-hat.md   | 2 +-
 src/es/overlay/sense-hat.md         | 2 +-
 src/es/overlay/unicorn-hat.md       | 2 +-
 src/es/translate/pijack.md          | 2 +-
 src/fr/overlay/unicorn-hat.md       | 2 +-
 src/fr/translate/pijack.md          | 2 +-
 src/fr/translate/redbear-iot-hat.md | 2 +-
 src/fr/translate/sense-hat.md       | 2 +-
 src/it/overlay/unicorn-hat.md       | 6 +++---
 src/it/translate/pijack.md          | 2 +-
 src/it/translate/redbear-iot-hat.md | 2 +-
 src/it/translate/sense-hat.md       | 2 +-
 src/tr/overlay/unicorn-hat.md       | 4 ++--
 src/tr/translate/pijack.md          | 2 +-
 src/tr/translate/redbear-iot-hat.md | 2 +-
 src/tr/translate/sense-hat.md       | 2 +-
 24 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/src/de/overlay/unicorn-hat.md b/src/de/overlay/unicorn-hat.md
index 2d3964d..0b7b943 100644
--- a/src/de/overlay/unicorn-hat.md
+++ b/src/de/overlay/unicorn-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/pimoroni/unicornhat
 buy: http://shop.pimoroni.com/products/unicorn-hat
 image: 'unicorn-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: detect
 power:
   '2':
 ground:
diff --git a/src/de/translate/pijack.md b/src/de/translate/pijack.md
index ecacd7d..0315a3b 100644
--- a/src/de/translate/pijack.md
+++ b/src/de/translate/pijack.md
@@ -10,7 +10,7 @@ url: https://pijack.net
 buy: https://pijack.net
 image: 'pijack.png'
 pincount: 40
-eeprom: yes
+eeprom: setup
 power:
   '2':
 ground:
diff --git a/src/de/translate/redbear-iot-hat.md b/src/de/translate/redbear-iot-hat.md
index 938587b..c642bf6 100644
--- a/src/de/translate/redbear-iot-hat.md
+++ b/src/de/translate/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/de/translate/sense-hat.md b/src/de/translate/sense-hat.md
index 3bdf12e..d8d5f8e 100644
--- a/src/de/translate/sense-hat.md
+++ b/src/de/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/en/overlay/pijack.md b/src/en/overlay/pijack.md
index ecacd7d..0315a3b 100644
--- a/src/en/overlay/pijack.md
+++ b/src/en/overlay/pijack.md
@@ -10,7 +10,7 @@ url: https://pijack.net
 buy: https://pijack.net
 image: 'pijack.png'
 pincount: 40
-eeprom: yes
+eeprom: setup
 power:
   '2':
 ground:
diff --git a/src/en/overlay/redbear-iot-hat.md b/src/en/overlay/redbear-iot-hat.md
index 938587b..c642bf6 100644
--- a/src/en/overlay/redbear-iot-hat.md
+++ b/src/en/overlay/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/en/overlay/sense-hat.md b/src/en/overlay/sense-hat.md
index 3bdf12e..d8d5f8e 100644
--- a/src/en/overlay/sense-hat.md
+++ b/src/en/overlay/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/en/overlay/unicorn-hat.md b/src/en/overlay/unicorn-hat.md
index 9f466a1..ebebccd 100644
--- a/src/en/overlay/unicorn-hat.md
+++ b/src/en/overlay/unicorn-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/pimoroni/unicornhat
 buy: http://shop.pimoroni.com/products/unicorn-hat
 image: 'unicorn-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: detect
 power:
   '2':
 ground:
diff --git a/src/es/overlay/redbear-iot-hat.md b/src/es/overlay/redbear-iot-hat.md
index a6a7853..8b35daf 100644
--- a/src/es/overlay/redbear-iot-hat.md
+++ b/src/es/overlay/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/es/overlay/sense-hat.md b/src/es/overlay/sense-hat.md
index eecb5d3..c561c20 100644
--- a/src/es/overlay/sense-hat.md
+++ b/src/es/overlay/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/es/overlay/unicorn-hat.md b/src/es/overlay/unicorn-hat.md
index 631a0bf..cb70881 100644
--- a/src/es/overlay/unicorn-hat.md
+++ b/src/es/overlay/unicorn-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/pimoroni/unicornhat
 buy: http://shop.pimoroni.com/products/unicorn-hat
 image: 'unicorn-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: detect
 power:
   '2':
 ground:
diff --git a/src/es/translate/pijack.md b/src/es/translate/pijack.md
index ecacd7d..0315a3b 100644
--- a/src/es/translate/pijack.md
+++ b/src/es/translate/pijack.md
@@ -10,7 +10,7 @@ url: https://pijack.net
 buy: https://pijack.net
 image: 'pijack.png'
 pincount: 40
-eeprom: yes
+eeprom: setup
 power:
   '2':
 ground:
diff --git a/src/fr/overlay/unicorn-hat.md b/src/fr/overlay/unicorn-hat.md
index e297036..061b091 100644
--- a/src/fr/overlay/unicorn-hat.md
+++ b/src/fr/overlay/unicorn-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/pimoroni/unicornhat
 buy: http://shop.pimoroni.com/products/unicorn-hat
 image: 'unicorn-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: setup
 power:
   '2':
 ground:
diff --git a/src/fr/translate/pijack.md b/src/fr/translate/pijack.md
index ecacd7d..0315a3b 100644
--- a/src/fr/translate/pijack.md
+++ b/src/fr/translate/pijack.md
@@ -10,7 +10,7 @@ url: https://pijack.net
 buy: https://pijack.net
 image: 'pijack.png'
 pincount: 40
-eeprom: yes
+eeprom: setup
 power:
   '2':
 ground:
diff --git a/src/fr/translate/redbear-iot-hat.md b/src/fr/translate/redbear-iot-hat.md
index 938587b..c642bf6 100644
--- a/src/fr/translate/redbear-iot-hat.md
+++ b/src/fr/translate/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/fr/translate/sense-hat.md b/src/fr/translate/sense-hat.md
index 3bdf12e..d8d5f8e 100644
--- a/src/fr/translate/sense-hat.md
+++ b/src/fr/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/it/overlay/unicorn-hat.md b/src/it/overlay/unicorn-hat.md
index 2317378..f810d0a 100644
--- a/src/it/overlay/unicorn-hat.md
+++ b/src/it/overlay/unicorn-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/pimoroni/unicornhat
 buy: http://shop.pimoroni.com/products/unicorn-hat
 image: 'unicorn-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: detect
 power:
   '2':
 ground:
@@ -26,10 +26,10 @@ pin:
 -->
 #Unicorn HAT
 
-64 LED accecanti montati su un HAT e controllati da una velocissima libreria in C, con cui puoi comunicare 
+64 LED accecanti montati su un HAT e controllati da una velocissima libreria in C, con cui puoi comunicare
 via Python, rendono l'Unicorn HAT il fratello maggiore (e più luminoso) del PiGlow.
 
-Nota: Unicorn HAT usa alcuni trucchetti col PWM, che sfruttano lo stesso hardware che ti permette di produrre 
+Nota: Unicorn HAT usa alcuni trucchetti col PWM, che sfruttano lo stesso hardware che ti permette di produrre
 suoni tramite il jack audio (analogico), per cui non puoi usare entrambi allo stesso momento!
 
 Per preparare e impostare l'HAT puoi utilizzare l'installer fornito:
diff --git a/src/it/translate/pijack.md b/src/it/translate/pijack.md
index ecacd7d..0315a3b 100644
--- a/src/it/translate/pijack.md
+++ b/src/it/translate/pijack.md
@@ -10,7 +10,7 @@ url: https://pijack.net
 buy: https://pijack.net
 image: 'pijack.png'
 pincount: 40
-eeprom: yes
+eeprom: setup
 power:
   '2':
 ground:
diff --git a/src/it/translate/redbear-iot-hat.md b/src/it/translate/redbear-iot-hat.md
index 938587b..c642bf6 100644
--- a/src/it/translate/redbear-iot-hat.md
+++ b/src/it/translate/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/it/translate/sense-hat.md b/src/it/translate/sense-hat.md
index 3bdf12e..d8d5f8e 100644
--- a/src/it/translate/sense-hat.md
+++ b/src/it/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/tr/overlay/unicorn-hat.md b/src/tr/overlay/unicorn-hat.md
index ec1995b..bdefbaa 100644
--- a/src/tr/overlay/unicorn-hat.md
+++ b/src/tr/overlay/unicorn-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/pimoroni/unicornhat
 buy: http://shop.pimoroni.com/products/unicorn-hat
 image: 'unicorn-hat.png'
 pincount: 40
-eeprom: yes
+eeprom: detect
 power:
   '2':
 ground:
@@ -42,4 +42,4 @@ Ardından Python scriptinize modülü ekleyip kurcalamaya başlayabilirsiniz:
 import unicornhat
 unicornhat.set_pixel(0, 0, 255, 255, 255)
 unicornhat.show()
-```
\ No newline at end of file
+```
diff --git a/src/tr/translate/pijack.md b/src/tr/translate/pijack.md
index ecacd7d..0315a3b 100644
--- a/src/tr/translate/pijack.md
+++ b/src/tr/translate/pijack.md
@@ -10,7 +10,7 @@ url: https://pijack.net
 buy: https://pijack.net
 image: 'pijack.png'
 pincount: 40
-eeprom: yes
+eeprom: setup
 power:
   '2':
 ground:
diff --git a/src/tr/translate/redbear-iot-hat.md b/src/tr/translate/redbear-iot-hat.md
index 938587b..c642bf6 100644
--- a/src/tr/translate/redbear-iot-hat.md
+++ b/src/tr/translate/redbear-iot-hat.md
@@ -11,7 +11,7 @@ github: https://github.com/redbear/IoT_pHAT
 buy: https://redbear.cc/product/rpi/iot-phat.html
 image: 'redbear-iot-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':
diff --git a/src/tr/translate/sense-hat.md b/src/tr/translate/sense-hat.md
index 3bdf12e..d8d5f8e 100644
--- a/src/tr/translate/sense-hat.md
+++ b/src/tr/translate/sense-hat.md
@@ -9,7 +9,7 @@ description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystic
 url: https://www.raspberrypi.org/products/sense-hat/
 image: 'sense-hat.png'
 pincount: 40
-eeprom: required
+eeprom: setup
 power:
   '1':
   '2':

From 8891ce0cb7b1ab1ecf8df90f652b1c9e5e3c899b Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Thu, 27 Oct 2016 00:27:08 +0100
Subject: [PATCH 14/16] generator and strings changed to match new eeprom
 scheme

---
 generate-html.py     | 12 ++++++------
 src/de/settings.yaml |  4 ++--
 src/en/settings.yaml |  4 ++--
 src/es/settings.yaml |  4 ++--
 src/fr/settings.yaml |  4 ++--
 src/it/settings.yaml |  4 ++--
 src/tr/settings.yaml |  4 ++--
 7 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/generate-html.py b/generate-html.py
index 4962f5b..5918f94 100755
--- a/generate-html.py
+++ b/generate-html.py
@@ -25,13 +25,13 @@ default_strings = {
     'pin_header': '{} pin header',
     'form_undefined': 'Undefined',
     'group_other': 'other',
+    'eeprom_detect': 'Uses VID/PID',
+    'eeprom_setup': 'Uses EEPROM',
     'uses_5v_and_3v3': 'Needs 5v and 3v3 power',
     'uses_5v': 'Needs 5v power',
     'uses_3v3': 'Needs 3v3 power',
     'uses_i2c': 'Uses I2C',
     'uses_spi': 'Uses SPI',
-    'uses_eeprom': 'Uses EEPROM',
-    'uses_eepvid': 'Uses VID/PID',
     'uses_n_gpio_pins': 'Uses {} GPIO pins',
     'bcm_pin_rev1_pi': 'BCM pin {} on Rev 1 ( very early ) Pi',
     'physical_pin_n': 'Physical pin {}',
@@ -117,10 +117,10 @@ def load_overlay(overlay):
 
         if 'eeprom' in loaded:
             eeprom = str(loaded['eeprom'])
-            if eeprom == 'True':
-                details.append(strings['uses_eepvid'])
-            if eeprom == 'required':
-                details.append(strings['uses_eeprom'])
+            if eeprom == 'detect' or eeprom == 'True':
+                details.append(strings['eeprom_detect'])
+            if eeprom == 'setup':
+                details.append(strings['eeprom_setup'])
 
         if 'power' in loaded:
             uses_5v = False
diff --git a/src/de/settings.yaml b/src/de/settings.yaml
index b45d49e..a3365d4 100644
--- a/src/de/settings.yaml
+++ b/src/de/settings.yaml
@@ -16,8 +16,8 @@ strings:
 - type_hat: 'HAT form-factor'
 - type_phat: 'pHAT form-factor'
 - type_classic: 'Classic form-factor'
-- uses_eepvid: 'EEPROM Hersteller ID'
-- uses_eeprom: 'benutzt EEPROM'
+- eeprom_detect: 'EEPROM Hersteller ID'
+- eeprom_setup: 'benutzt EEPROM'
 - uses_i2c: 'benutzt I2C'
 - uses_spi: 'benutzt SPI'
 - uses_5v_and_3v3: '5v und 3v3 Stromversorgung'
diff --git a/src/en/settings.yaml b/src/en/settings.yaml
index 51551dc..9be9650 100644
--- a/src/en/settings.yaml
+++ b/src/en/settings.yaml
@@ -16,8 +16,8 @@ strings:
 - type_hat: 'HAT form-factor'
 - type_phat: 'pHAT form-factor'
 - type_classic: 'Classic form-factor'
-- uses_eepvid: 'EEPROM product ID'
-- uses_eeprom: 'EEPROM auto configuration'
+- eeprom_detect: 'EEPROM product ID'
+- eeprom_setup: 'EEPROM auto configuration'
 - uses_i2c: 'Communication over I2C'
 - uses_spi: 'Communication over SPI'
 - uses_5v_and_3v3: 'Needs 5v and 3v3 power'
diff --git a/src/es/settings.yaml b/src/es/settings.yaml
index b7f0016..f546996 100644
--- a/src/es/settings.yaml
+++ b/src/es/settings.yaml
@@ -16,8 +16,8 @@ strings:
 - type_hat: 'formato HAT'
 - type_phat: 'formato pHAT'
 - type_classic: 'formato clásico'
-- uses_eepvid: 'EEPROM ID'
-- uses_eeprom: 'Usa EEPROM'
+- eeprom_detect: 'EEPROM ID'
+- eeprom_setup: 'Usa EEPROM'
 - uses_i2c: 'Usa I2C'
 - uses_spi: 'Usa SPI'
 - uses_5v_and_3v3: 'Alimentación 5v+3v3'
diff --git a/src/fr/settings.yaml b/src/fr/settings.yaml
index 4a15291..33a95d9 100644
--- a/src/fr/settings.yaml
+++ b/src/fr/settings.yaml
@@ -16,8 +16,8 @@ strings:
 - type_hat: 'format HAT'
 - type_phat: 'format pHAT'
 - type_classic: 'format Classic'
-- uses_eepvid: 'identification produit par EEPROM'
-- uses_eeprom: 'configuration automatique par EEPROM'
+- eeprom_detect: 'identification produit par EEPROM'
+- eeprom_setup: 'configuration automatique par EEPROM'
 - uses_i2c: 'communication par bus I2C'
 - uses_spi: 'communication par bus SPI'
 - uses_5v_and_3v3: 'Alimentation 5v et 3v3'
diff --git a/src/it/settings.yaml b/src/it/settings.yaml
index 1d467ea..8663157 100644
--- a/src/it/settings.yaml
+++ b/src/it/settings.yaml
@@ -16,8 +16,8 @@ strings:
 - type_hat: 'Fattore di forma HAT'
 - type_phat: 'Fattore di forma pHAT'
 - type_classic: 'Fattore di forma classico'
-- uses_eepvid: 'Prodotto ID EEPROM'
-- uses_eeprom: 'Utilizza EEPROM'
+- eeprom_detect: 'Prodotto ID EEPROM'
+- eeprom_setup: 'Utilizza EEPROM'
 - uses_i2c: 'Utilizza I2C'
 - uses_spi: 'Utilizza SPI'
 - uses_5v_and_3v3: 'Alimentazione a 5v+3.3V'
diff --git a/src/tr/settings.yaml b/src/tr/settings.yaml
index 24ccad2..e620249 100644
--- a/src/tr/settings.yaml
+++ b/src/tr/settings.yaml
@@ -16,8 +16,8 @@ strings:
 - type_hat: 'HAT form-factor'
 - type_phat: 'pHAT form-factor'
 - type_classic: 'Classic form-factor'
-- uses_eepvid: 'EEPROM ID'
-- uses_eeprom: 'Kullanan EEPROM'
+- eeprom_detect: 'EEPROM ID'
+- eeprom_setup: 'Kullanan EEPROM'
 - uses_i2c: 'Kullanan I2C'
 - uses_spi: 'Kullanan SPI'
 - uses_5v_and_3v3: '5v ve 3.3V Güç'

From 0c212157731a368ce01c2f244f2505d88b95c10c Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Thu, 27 Oct 2016 00:52:53 +0100
Subject: [PATCH 15/16] additional info for pin 27+28

---
 src/en/pin/pin-27.md | 4 +++-
 src/fr/pin/pin-27.md | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/src/en/pin/pin-27.md b/src/en/pin/pin-27.md
index 1aa0b3e..eba1962 100644
--- a/src/en/pin/pin-27.md
+++ b/src/en/pin/pin-27.md
@@ -1 +1,3 @@
-These pins are generally reserved for i2c communication with a HAT EEPROM.
\ No newline at end of file
+These pins are generally reserved for i2c communication with an EEPROM.
+
+Connect those pins for auto configuration, if the board provides the feature (check the board description for details of EEPROM functionality).
diff --git a/src/fr/pin/pin-27.md b/src/fr/pin/pin-27.md
index 16766f9..73beb4c 100644
--- a/src/fr/pin/pin-27.md
+++ b/src/fr/pin/pin-27.md
@@ -1 +1,3 @@
-Ces broches sont généralement réservées à la communication i2c avec l'EEPROM des 'chapeaux' HAT.
\ No newline at end of file
+Ces broches sont généralement réservées à la communication i2c avec l'EEPROM des cartes.
+
+Assurez vous de connecter ces broches si la carte permet une configuration automatique au démarrage (cette information fait partie du résumé descriptif des cartes, si applicable).

From 14f02763ee3fda9efa6f0dc102cd1e415fb150b3 Mon Sep 17 00:00:00 2001
From: RogueM <chaosgen6@googlemail.com>
Date: Thu, 27 Oct 2016 01:44:01 +0100
Subject: [PATCH 16/16] i2c devices documented in yaml

---
 src/de/translate/sense-hat.md | 20 ++++++++++++++++++--
 src/en/overlay/sense-hat.md   | 20 ++++++++++++++++++--
 src/es/overlay/sense-hat.md   | 16 ++++++++++++++++
 src/fr/translate/sense-hat.md | 20 ++++++++++++++++++--
 src/it/translate/sense-hat.md | 20 ++++++++++++++++++--
 src/tr/translate/sense-hat.md | 20 ++++++++++++++++++--
 6 files changed, 106 insertions(+), 10 deletions(-)

diff --git a/src/de/translate/sense-hat.md b/src/de/translate/sense-hat.md
index d8d5f8e..7dde74b 100644
--- a/src/de/translate/sense-hat.md
+++ b/src/de/translate/sense-hat.md
@@ -27,6 +27,22 @@ pin:
     mode: i2c
   '5':
     mode: i2c
+i2c:
+  '0x5c':
+    name: Pressure/Temp
+    device: lps25h
+  '0x5f':
+    name: Humidity/Temp
+    device: hts221
+  '0x6a':
+    name: Accelerometer
+    device: lsm9ds1
+  '0x1c':
+    name: Magnetometer
+    device: lsm9ds1
+  '0x46':
+    name: LED Matrix
+    device: led2472g
 install:
   'devices':
     - 'i2c'
@@ -39,6 +55,6 @@ The shift register driving the LED Matrix is a LED2472G connected via an ATTINY8
 
 The sensors themselves also operate over the i2c bus:
 
-The IMU (Gyroscope, Accelerometer, Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e),0x6a(0x6b), with Interrupts on the ATTINY88.
+The IMU (Accelerometer and Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e) and 0x6a(0x6b), with Interrupts on the ATTINY88.
 
-Environmental sensors are represented by a LPS25H Pressure+Temperature sensor at address 0x5c and by a HTS221 Humidity+Temp sensor at 0x5f on the i2c bus.
+Environmental sensors are represented by a LPS25H Pressure/Temperature sensor at address 0x5c and by a HTS221 Humidity/Temperature sensor at 0x5f on the i2c bus.
diff --git a/src/en/overlay/sense-hat.md b/src/en/overlay/sense-hat.md
index d8d5f8e..7dde74b 100644
--- a/src/en/overlay/sense-hat.md
+++ b/src/en/overlay/sense-hat.md
@@ -27,6 +27,22 @@ pin:
     mode: i2c
   '5':
     mode: i2c
+i2c:
+  '0x5c':
+    name: Pressure/Temp
+    device: lps25h
+  '0x5f':
+    name: Humidity/Temp
+    device: hts221
+  '0x6a':
+    name: Accelerometer
+    device: lsm9ds1
+  '0x1c':
+    name: Magnetometer
+    device: lsm9ds1
+  '0x46':
+    name: LED Matrix
+    device: led2472g
 install:
   'devices':
     - 'i2c'
@@ -39,6 +55,6 @@ The shift register driving the LED Matrix is a LED2472G connected via an ATTINY8
 
 The sensors themselves also operate over the i2c bus:
 
-The IMU (Gyroscope, Accelerometer, Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e),0x6a(0x6b), with Interrupts on the ATTINY88.
+The IMU (Accelerometer and Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e) and 0x6a(0x6b), with Interrupts on the ATTINY88.
 
-Environmental sensors are represented by a LPS25H Pressure+Temperature sensor at address 0x5c and by a HTS221 Humidity+Temp sensor at 0x5f on the i2c bus.
+Environmental sensors are represented by a LPS25H Pressure/Temperature sensor at address 0x5c and by a HTS221 Humidity/Temperature sensor at 0x5f on the i2c bus.
diff --git a/src/es/overlay/sense-hat.md b/src/es/overlay/sense-hat.md
index c561c20..26d7d08 100644
--- a/src/es/overlay/sense-hat.md
+++ b/src/es/overlay/sense-hat.md
@@ -27,6 +27,22 @@ pin:
     mode: i2c
   '5':
     mode: i2c
+i2c:
+  '0x5c':
+    name: Pressure/Temp
+    device: lps25h
+  '0x5f':
+    name: Humidity/Temp
+    device: hts221
+  '0x6a':
+    name: Accelerometer
+    device: lsm9ds1
+  '0x1c':
+    name: Magnetometer
+    device: lsm9ds1
+  '0x46':
+    name: LED Matrix
+    device: led2472g
 install:
   'devices':
     - 'i2c'
diff --git a/src/fr/translate/sense-hat.md b/src/fr/translate/sense-hat.md
index d8d5f8e..7dde74b 100644
--- a/src/fr/translate/sense-hat.md
+++ b/src/fr/translate/sense-hat.md
@@ -27,6 +27,22 @@ pin:
     mode: i2c
   '5':
     mode: i2c
+i2c:
+  '0x5c':
+    name: Pressure/Temp
+    device: lps25h
+  '0x5f':
+    name: Humidity/Temp
+    device: hts221
+  '0x6a':
+    name: Accelerometer
+    device: lsm9ds1
+  '0x1c':
+    name: Magnetometer
+    device: lsm9ds1
+  '0x46':
+    name: LED Matrix
+    device: led2472g
 install:
   'devices':
     - 'i2c'
@@ -39,6 +55,6 @@ The shift register driving the LED Matrix is a LED2472G connected via an ATTINY8
 
 The sensors themselves also operate over the i2c bus:
 
-The IMU (Gyroscope, Accelerometer, Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e),0x6a(0x6b), with Interrupts on the ATTINY88.
+The IMU (Accelerometer and Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e) and 0x6a(0x6b), with Interrupts on the ATTINY88.
 
-Environmental sensors are represented by a LPS25H Pressure+Temperature sensor at address 0x5c and by a HTS221 Humidity+Temp sensor at 0x5f on the i2c bus.
+Environmental sensors are represented by a LPS25H Pressure/Temperature sensor at address 0x5c and by a HTS221 Humidity/Temperature sensor at 0x5f on the i2c bus.
diff --git a/src/it/translate/sense-hat.md b/src/it/translate/sense-hat.md
index d8d5f8e..7dde74b 100644
--- a/src/it/translate/sense-hat.md
+++ b/src/it/translate/sense-hat.md
@@ -27,6 +27,22 @@ pin:
     mode: i2c
   '5':
     mode: i2c
+i2c:
+  '0x5c':
+    name: Pressure/Temp
+    device: lps25h
+  '0x5f':
+    name: Humidity/Temp
+    device: hts221
+  '0x6a':
+    name: Accelerometer
+    device: lsm9ds1
+  '0x1c':
+    name: Magnetometer
+    device: lsm9ds1
+  '0x46':
+    name: LED Matrix
+    device: led2472g
 install:
   'devices':
     - 'i2c'
@@ -39,6 +55,6 @@ The shift register driving the LED Matrix is a LED2472G connected via an ATTINY8
 
 The sensors themselves also operate over the i2c bus:
 
-The IMU (Gyroscope, Accelerometer, Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e),0x6a(0x6b), with Interrupts on the ATTINY88.
+The IMU (Accelerometer and Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e) and 0x6a(0x6b), with Interrupts on the ATTINY88.
 
-Environmental sensors are represented by a LPS25H Pressure+Temperature sensor at address 0x5c and by a HTS221 Humidity+Temp sensor at 0x5f on the i2c bus.
+Environmental sensors are represented by a LPS25H Pressure/Temperature sensor at address 0x5c and by a HTS221 Humidity/Temperature sensor at 0x5f on the i2c bus.
diff --git a/src/tr/translate/sense-hat.md b/src/tr/translate/sense-hat.md
index d8d5f8e..7dde74b 100644
--- a/src/tr/translate/sense-hat.md
+++ b/src/tr/translate/sense-hat.md
@@ -27,6 +27,22 @@ pin:
     mode: i2c
   '5':
     mode: i2c
+i2c:
+  '0x5c':
+    name: Pressure/Temp
+    device: lps25h
+  '0x5f':
+    name: Humidity/Temp
+    device: hts221
+  '0x6a':
+    name: Accelerometer
+    device: lsm9ds1
+  '0x1c':
+    name: Magnetometer
+    device: lsm9ds1
+  '0x46':
+    name: LED Matrix
+    device: led2472g
 install:
   'devices':
     - 'i2c'
@@ -39,6 +55,6 @@ The shift register driving the LED Matrix is a LED2472G connected via an ATTINY8
 
 The sensors themselves also operate over the i2c bus:
 
-The IMU (Gyroscope, Accelerometer, Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e),0x6a(0x6b), with Interrupts on the ATTINY88.
+The IMU (Accelerometer and Magnetometer) through a LSM9DS1 found at i2c address 0x1c(0x1e) and 0x6a(0x6b), with Interrupts on the ATTINY88.
 
-Environmental sensors are represented by a LPS25H Pressure+Temperature sensor at address 0x5c and by a HTS221 Humidity+Temp sensor at 0x5f on the i2c bus.
+Environmental sensors are represented by a LPS25H Pressure/Temperature sensor at address 0x5c and by a HTS221 Humidity/Temperature sensor at 0x5f on the i2c bus.