Sheepwalk RPI2 published
This commit is contained in:
parent
008b69a087
commit
f83633ca39
@ -1,36 +0,0 @@
|
||||
<!--
|
||||
---
|
||||
name: Sheepwalk RPI2 1-Wire Adapter
|
||||
class: board
|
||||
type: com
|
||||
formfactor: Custom
|
||||
manufacturer: Sheepwalk
|
||||
description: I2C to 1-Wire host adapter
|
||||
url: http://www.sheepwalkelectronics.co.uk/RPI2.php
|
||||
buy: http://www.sheepwalkelectronics.co.uk/product_info.php?products_id=30
|
||||
image: 'sheepwalk-rpi2.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'2':
|
||||
'4':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
#Sheepwalk Electronics RPI2 1-Wire Host Adapter
|
||||
|
||||
This module provides a way to connect 1-Wire devices to your Raspberry Pi without using up one of the USB ports. It is based around a DS2482-100 I2C to 1-Wire IC.
|
||||
|
||||
Connection to your 1-Wire network is either by the RJ45 socket or the screw terminals. The RJ45 socket is wired to the same standard as all our modules to allow the easy assembly of a network using standard ethernet cables. It includes +5V on pin 2 for any modules that require it.
|
||||
|
||||
The jumpers on the RPI2 allow you to set the i2c address of your RPI2. For most people it won't matter what it is set to but if you have multiple RPI2s or you also have other i2c devices on the bus you might need to change the address. By default the i2c address is 0x18 but it can also be configured to be 0x19, 0x1a or 0x1b.
|
Before Width: | Height: | Size: 72 KiB After Width: | Height: | Size: 72 KiB |
@ -119,3 +119,4 @@ overlays:
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
|
35
src/de/translate/sheepwalk-rpi2.md
Normal file
35
src/de/translate/sheepwalk-rpi2.md
Normal file
@ -0,0 +1,35 @@
|
||||
<!--
|
||||
---
|
||||
name: RPI2 1-Wire Adapter
|
||||
class: board
|
||||
type: com
|
||||
formfactor: Custom
|
||||
manufacturer: Sheepwalk
|
||||
description: I2C to 1-Wire host adapter
|
||||
url: http://www.sheepwalkelectronics.co.uk/RPI2.php
|
||||
buy: http://www.sheepwalkelectronics.co.uk/product_info.php?products_id=30
|
||||
image: 'sheepwalk-rpi2.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
# RPI2 1-Wire Host Adapter
|
||||
|
||||
This module provides a way to connect 1-Wire devices to your Raspberry Pi without using up one of the USB ports. It is based around the DS2482-100 I2C to 1-Wire IC.
|
||||
|
||||
Connection to your 1-Wire network is either by the RJ45 socket or the screw terminals. The RJ45 socket allows the assembly of a network using standard ethernet cables.
|
||||
|
||||
The jumpers on the RPI2 host adapter allow you to set the i2c address of the IC. This means that if you have multiple RPI2 adapters or you have other i2c devices on the bus you can change its address to avoid conflicts. By default the address is 0x18 but it can be set to 0x19, 0x1a or 0x1b.
|
35
src/en/overlay/sheepwalk-rpi2.md
Normal file
35
src/en/overlay/sheepwalk-rpi2.md
Normal file
@ -0,0 +1,35 @@
|
||||
<!--
|
||||
---
|
||||
name: RPI2 1-Wire Adapter
|
||||
class: board
|
||||
type: com
|
||||
formfactor: Custom
|
||||
manufacturer: Sheepwalk
|
||||
description: I2C to 1-Wire host adapter
|
||||
url: http://www.sheepwalkelectronics.co.uk/RPI2.php
|
||||
buy: http://www.sheepwalkelectronics.co.uk/product_info.php?products_id=30
|
||||
image: 'sheepwalk-rpi2.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
# RPI2 1-Wire Host Adapter
|
||||
|
||||
This module provides a way to connect 1-Wire devices to your Raspberry Pi without using up one of the USB ports. It is based around the DS2482-100 I2C to 1-Wire IC.
|
||||
|
||||
Connection to your 1-Wire network is either by the RJ45 socket or the screw terminals. The RJ45 socket allows the assembly of a network using standard ethernet cables.
|
||||
|
||||
The jumpers on the RPI2 host adapter allow you to set the i2c address of the IC. This means that if you have multiple RPI2 adapters or you have other i2c devices on the bus you can change its address to avoid conflicts. By default the address is 0x18 but it can be set to 0x19, 0x1a or 0x1b.
|
@ -119,3 +119,4 @@ overlays:
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
|
@ -119,3 +119,4 @@ overlays:
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
|
35
src/es/translate/sheepwalk-rpi2.md
Normal file
35
src/es/translate/sheepwalk-rpi2.md
Normal file
@ -0,0 +1,35 @@
|
||||
<!--
|
||||
---
|
||||
name: RPI2 1-Wire Adapter
|
||||
class: board
|
||||
type: com
|
||||
formfactor: Custom
|
||||
manufacturer: Sheepwalk
|
||||
description: I2C to 1-Wire host adapter
|
||||
url: http://www.sheepwalkelectronics.co.uk/RPI2.php
|
||||
buy: http://www.sheepwalkelectronics.co.uk/product_info.php?products_id=30
|
||||
image: 'sheepwalk-rpi2.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
# RPI2 1-Wire Host Adapter
|
||||
|
||||
This module provides a way to connect 1-Wire devices to your Raspberry Pi without using up one of the USB ports. It is based around the DS2482-100 I2C to 1-Wire IC.
|
||||
|
||||
Connection to your 1-Wire network is either by the RJ45 socket or the screw terminals. The RJ45 socket allows the assembly of a network using standard ethernet cables.
|
||||
|
||||
The jumpers on the RPI2 host adapter allow you to set the i2c address of the IC. This means that if you have multiple RPI2 adapters or you have other i2c devices on the bus you can change its address to avoid conflicts. By default the address is 0x18 but it can be set to 0x19, 0x1a or 0x1b.
|
@ -119,3 +119,4 @@ overlays:
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
|
35
src/fr/translate/sheepwalk-rpi2.md
Normal file
35
src/fr/translate/sheepwalk-rpi2.md
Normal file
@ -0,0 +1,35 @@
|
||||
<!--
|
||||
---
|
||||
name: RPI2 1-Wire Adapter
|
||||
class: board
|
||||
type: com
|
||||
formfactor: Custom
|
||||
manufacturer: Sheepwalk
|
||||
description: I2C to 1-Wire host adapter
|
||||
url: http://www.sheepwalkelectronics.co.uk/RPI2.php
|
||||
buy: http://www.sheepwalkelectronics.co.uk/product_info.php?products_id=30
|
||||
image: 'sheepwalk-rpi2.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
# RPI2 1-Wire Host Adapter
|
||||
|
||||
This module provides a way to connect 1-Wire devices to your Raspberry Pi without using up one of the USB ports. It is based around the DS2482-100 I2C to 1-Wire IC.
|
||||
|
||||
Connection to your 1-Wire network is either by the RJ45 socket or the screw terminals. The RJ45 socket allows the assembly of a network using standard ethernet cables.
|
||||
|
||||
The jumpers on the RPI2 host adapter allow you to set the i2c address of the IC. This means that if you have multiple RPI2 adapters or you have other i2c devices on the bus you can change its address to avoid conflicts. By default the address is 0x18 but it can be set to 0x19, 0x1a or 0x1b.
|
@ -119,3 +119,4 @@ overlays:
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
|
35
src/it/translate/sheepwalk-rpi2.md
Normal file
35
src/it/translate/sheepwalk-rpi2.md
Normal file
@ -0,0 +1,35 @@
|
||||
<!--
|
||||
---
|
||||
name: RPI2 1-Wire Adapter
|
||||
class: board
|
||||
type: com
|
||||
formfactor: Custom
|
||||
manufacturer: Sheepwalk
|
||||
description: I2C to 1-Wire host adapter
|
||||
url: http://www.sheepwalkelectronics.co.uk/RPI2.php
|
||||
buy: http://www.sheepwalkelectronics.co.uk/product_info.php?products_id=30
|
||||
image: 'sheepwalk-rpi2.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
# RPI2 1-Wire Host Adapter
|
||||
|
||||
This module provides a way to connect 1-Wire devices to your Raspberry Pi without using up one of the USB ports. It is based around the DS2482-100 I2C to 1-Wire IC.
|
||||
|
||||
Connection to your 1-Wire network is either by the RJ45 socket or the screw terminals. The RJ45 socket allows the assembly of a network using standard ethernet cables.
|
||||
|
||||
The jumpers on the RPI2 host adapter allow you to set the i2c address of the IC. This means that if you have multiple RPI2 adapters or you have other i2c devices on the bus you can change its address to avoid conflicts. By default the address is 0x18 but it can be set to 0x19, 0x1a or 0x1b.
|
@ -119,3 +119,4 @@ overlays:
|
||||
- phat-beat
|
||||
- pisupply-pi-poe
|
||||
- touch-phat
|
||||
- sheepwalk-rpi2
|
||||
|
35
src/tr/translate/sheepwalk-rpi2.md
Normal file
35
src/tr/translate/sheepwalk-rpi2.md
Normal file
@ -0,0 +1,35 @@
|
||||
<!--
|
||||
---
|
||||
name: RPI2 1-Wire Adapter
|
||||
class: board
|
||||
type: com
|
||||
formfactor: Custom
|
||||
manufacturer: Sheepwalk
|
||||
description: I2C to 1-Wire host adapter
|
||||
url: http://www.sheepwalkelectronics.co.uk/RPI2.php
|
||||
buy: http://www.sheepwalkelectronics.co.uk/product_info.php?products_id=30
|
||||
image: 'sheepwalk-rpi2.png'
|
||||
pincount: 10
|
||||
eeprom: no
|
||||
power:
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
i2c:
|
||||
'0x18':
|
||||
name: DS2482
|
||||
device: DS2482-100
|
||||
-->
|
||||
# RPI2 1-Wire Host Adapter
|
||||
|
||||
This module provides a way to connect 1-Wire devices to your Raspberry Pi without using up one of the USB ports. It is based around the DS2482-100 I2C to 1-Wire IC.
|
||||
|
||||
Connection to your 1-Wire network is either by the RJ45 socket or the screw terminals. The RJ45 socket allows the assembly of a network using standard ethernet cables.
|
||||
|
||||
The jumpers on the RPI2 host adapter allow you to set the i2c address of the IC. This means that if you have multiple RPI2 adapters or you have other i2c devices on the bus you can change its address to avoid conflicts. By default the address is 0x18 but it can be set to 0x19, 0x1a or 0x1b.
|
Loading…
Reference in New Issue
Block a user