From f95fadd0b4677e0ae3ad05c987723255fa06c655 Mon Sep 17 00:00:00 2001 From: mmame Date: Thu, 2 Feb 2017 16:15:22 +0100 Subject: [PATCH] Update mdb2pi-hat.md --- draft/overlay/mdb2pi-hat.md | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/draft/overlay/mdb2pi-hat.md b/draft/overlay/mdb2pi-hat.md index 27d0487..6033806 100644 --- a/draft/overlay/mdb2pi-hat.md +++ b/draft/overlay/mdb2pi-hat.md @@ -45,26 +45,25 @@ The MDB2Pi HAT can serve as a MDB master or as a peripheral MDB Device for Vendi The MDB2Pi HAT is powered from the MDB bus (10...42V regulated or unregulated supply) and backpowers the Raspberry Pi with up to 2.5A@5V. Thus no separate power supply is required for the pi. ##Configuration -1. Enable UART and HAT detection by adding the following lines to /boot/config.txt: +Enable UART and HAT detection by adding the following lines to /boot/config.txt: ```bash enable_uart=1 dtparam=i2c_vc=on ``` -2. disable serial console output: +disable serial console output: ```bash sudo nano /boot/cmdline.txt ``` --> remove the "console=..." parameter ##MDB Master and Cashless Device Demo: -Prerequisites: -1. Install mono runtime: +Install mono runtime: ```bash sudo apt-get install mono-runtime ``` -2. Get the Demo code: +Get the Demo code: ```bash wget https://secure.abrantix.com/downloads/MDBConverter/MDBConverter.zip unzip MDBConverter.zip