zerolipo install script added

draft/overlay/sixfab_cellular_shield.md

@@ -1,42 +0,0 @@
-<!--
----
-name: Sixfab 3G/4G/LTE Base Shield
-class: board
-type: network
-formfactor: custom
-manufacturer: Sixfab
-description: Connect from anywhere to the internet on a Raspberry Pi
-url: http://sixfab.com/product/3g-4glte-base-shield/
-buy: http://sixfab.com/product/3g-4glte-base-shield/
-image: 'sixfab_cellular_shield.png'
-pincount: 40
-eeprom: yes
-power:
-  '4':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '8':
-    mode: uart
-  '10':
-    mode: uart
-  '16':
-    name: Disable
-  '18':
-    name: Perst
-
--->
-# Sixfab 3G/4G/LTE Base Shield
-
-This is a cellular add-on board for the Raspberry Pi enabling you to get up to 100 Mbps down and 50 Mbps
-depending on which cellular module you have installed.
-
-Also using the USB connector you can use the shield with Linux, Windows and Android.

draft/overlay/sixfab_gps_shield.md

@@ -1,47 +0,0 @@
-<!--
----
-name: Sixfab GPS Shield
-class: board
-type: gps
-formfactor: PHAT
-manufacturer: Sixfab
-description: A GPS add-on board for Raspberry Pi
-url: http://sixfab.com/product/gsm-shields/
-buy: http://sixfab.com/product/gsm-shields/
-image: 'sixfab_gps_shield.png'
-pincount: 40
-eeprom: yes
-power:
-  '4':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '8':
-    mode: uart
-  '10':
-    mode: uart
-  '12':
-    name: LED
-  '22':
-    name: Reset
-  '7':
-    name: 1-Wire Pin
-
--->
-# Sixfab GPS Shield
-
-This is an easy way to add GPS to your pi
-
-Some features include:
-* Location, Time, Speed all on the same NMEA Protocol
-* Built in 1-Wire support
-* Built in antenna
-* Also programmable from Linux, MacOS, Windows, Android

draft/overlay/sixfab_xbee_shield.md

@@ -1,46 +0,0 @@
-<!--
----
-name: Sixfab XBee Shield
-class: board
-type: network
-formfactor: PHat
-manufacturer: Sixfab
-description: Use XBee modules with the Raspberry Pi
-url: http://sixfab.com/product/xbee-shield/
-buy: http://sixfab.com/product/xbee-shield/
-image: 'sixfab_xbee_shield.png'
-pincount: 40
-eeprom: yes
-power:
-  '4':
-  '2':
-ground:
-  '6':
-  '9':
-  '14':
-  '20':
-  '25':
-  '30':
-  '34':
-  '39':
-pin:
-  '8':
-    mode: uart
-  '10':
-    mode: uart
-  '18':
-    name: Reset
-  '12':
-    name: LED
-  '7':
-    name: 1-Wire Pin
--->
-# Sixfab XBee Shield
-
-This add-on board allows you to use XBee modules easily with your Pi.
-Some features include:
-* Headers fit most XBee modules
-* Up to 28 miles range
-* Point to point communication
-* Communication LED's
-* Programable from Linux, Windows and Android

src/de/translate/zero-lipo.md

@@ -21,12 +21,18 @@ pin:
     mode: input
     active: high
 -->
-#Zero LiPo
+# Zero LiPo
 
 The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible.
 
 The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi.
 
+To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run:
+
+```bash
+curl https://get.pimoroni.com/zerolipo | bash
+```
+
 Features:
 
 * 0.8mm thick PCB

src/en/overlay/zero-lipo.md

@@ -21,12 +21,18 @@ pin:
     mode: input
     active: high
 -->
-#Zero LiPo
+# Zero LiPo
 
 The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible.
 
 The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi.
 
+To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run:
+
+```bash
+curl https://get.pimoroni.com/zerolipo | bash
+```
+
 Features:
 
 * 0.8mm thick PCB

src/es/overlay/zero-lipo.md

@@ -21,12 +21,16 @@ pin:
     mode: input
     active: high
 -->
-#Zero LiPo
+# Zero LiPo
 
 El objetivo de Zero LiPo es ser la fuente de alimentación para Raspberry Pi más compacta.
 
 Esta placa inclute LEDs indicadores de alimentación y bajo nivel de batería, además de un conector JST para conectar una batería LiPo, LiIon o cualquier otra batería compatible con JST. El convertidor TPS61232 step-up de Texas Instruments convierte el voltaje de 3-4.2V de entrada de las LiPo/LiIon en 5V, dando una alimentación de 5V estable perfecta para tu Pi.
 
+```bash
+curl https://get.pimoroni.com/zerolipo | bash
+```
+
 Especificaciones:
 
 * PCB de 0.8 mm de grosor

src/fr/translate/zero-lipo.md

@@ -21,12 +21,18 @@ pin:
     mode: input
     active: high
 -->
-#Zero LiPo
+# Zero LiPo
 
 The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible.
 
 The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi.
 
+To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run:
+
+```bash
+curl https://get.pimoroni.com/zerolipo | bash
+```
+
 Features:
 
 * 0.8mm thick PCB

src/it/translate/zero-lipo.md

@@ -21,12 +21,18 @@ pin:
     mode: input
     active: high
 -->
-#Zero LiPo
+# Zero LiPo
 
 The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible.
 
 The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi.
 
+To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run:
+
+```bash
+curl https://get.pimoroni.com/zerolipo | bash
+```
+
 Features:
 
 * 0.8mm thick PCB

src/tr/translate/zero-lipo.md

@@ -21,12 +21,18 @@ pin:
     mode: input
     active: high
 -->
-#Zero LiPo
+# Zero LiPo
 
 The Zero LiPo aims to give you the most compact Raspberry Pi power supply possible.
 
 The board includes power on and battery low indicator LEDs as well as a JST connector, to which you can connect a LiPo, LiIon, or other battery with a JST plug. The TPS61232 step-up boost converter from Texas Instruments converts the 3-4.2V input voltage from the LiPos/LiIons to 5V, providing a stable 5V supply perfect for your Pi.
 
+To setup the monitoring of the Battery and trigger a clean shutdown when the voltage drop below 3.4V, simply run:
+
+```bash
+curl https://get.pimoroni.com/zerolipo | bash
+```
+
 Features:
 
 * 0.8mm thick PCB