Merge branch 'Fe-Pi-master'
This commit is contained in:
commit
14ad829aea
BIN
resources/boards/fepi-audio.png
Normal file
BIN
resources/boards/fepi-audio.png
Normal file
Binary file not shown.
After Width: | Height: | Size: 110 KiB |
@ -125,7 +125,6 @@ overlays:
|
|||||||
- adafruit-joybonnet
|
- adafruit-joybonnet
|
||||||
- vandenbosch-gpio-input
|
- vandenbosch-gpio-input
|
||||||
|
|
||||||
- fepi-audio-z
|
|
||||||
- energenie-pi-mote
|
- energenie-pi-mote
|
||||||
- sixfab-cellular-shield
|
- sixfab-cellular-shield
|
||||||
- sixfab-gps-shield
|
- sixfab-gps-shield
|
||||||
@ -160,3 +159,4 @@ overlays:
|
|||||||
- waveshare-rgb-led-phat-4x8
|
- waveshare-rgb-led-phat-4x8
|
||||||
- waveshare-rgb-led-hat-8x8
|
- waveshare-rgb-led-hat-8x8
|
||||||
- monarco-hat
|
- monarco-hat
|
||||||
|
- fepi-audio
|
||||||
|
66
src/de/translate/fepi-audio.md
Normal file
66
src/de/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Fe-Pi Audio Card
|
||||||
|
class: board
|
||||||
|
type: audio
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: FePi
|
||||||
|
description: A complete audio solution for the Raspberry Pi
|
||||||
|
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
image: 'fepi-audio.png'
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'25':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: BCLK (Bit Clock)
|
||||||
|
mode: i2s
|
||||||
|
'35':
|
||||||
|
name: LRCLK (Left/Right Clock)
|
||||||
|
mode: i2s
|
||||||
|
'38':
|
||||||
|
name: DIN (Data In)
|
||||||
|
mode: i2s
|
||||||
|
'40':
|
||||||
|
name: DOUT (Data Out)
|
||||||
|
mode: i2s
|
||||||
|
i2c:
|
||||||
|
'0x0a':
|
||||||
|
name: SGTL5000
|
||||||
|
device: SGTL5000XNAA3/R2
|
||||||
|
-->
|
||||||
|
#Audio Z
|
||||||
|
|
||||||
|
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||||
|
|
||||||
|
## Features ##
|
||||||
|
|
||||||
|
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||||
|
* Raspberry Pi 2, 3 PCB footprint.
|
||||||
|
* SGTL5000 low power stereo codec.
|
||||||
|
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||||
|
* RCA jacks for stereo Line In, and Line Out.
|
||||||
|
* 4 pin screw terminal for Speaker Out.
|
||||||
|
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||||
|
* ADC > 90 dB SNR and -72 dB THD+N
|
||||||
|
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||||
|
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||||
|
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||||
|
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||||
|
* 2x20pin 2.54mm female header included!
|
66
src/en/overlay/fepi-audio.md
Normal file
66
src/en/overlay/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Fe-Pi Audio Card
|
||||||
|
class: board
|
||||||
|
type: audio
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: FePi
|
||||||
|
description: A complete audio solution for the Raspberry Pi
|
||||||
|
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
image: 'fepi-audio.png'
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'25':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: BCLK (Bit Clock)
|
||||||
|
mode: i2s
|
||||||
|
'35':
|
||||||
|
name: LRCLK (Left/Right Clock)
|
||||||
|
mode: i2s
|
||||||
|
'38':
|
||||||
|
name: DIN (Data In)
|
||||||
|
mode: i2s
|
||||||
|
'40':
|
||||||
|
name: DOUT (Data Out)
|
||||||
|
mode: i2s
|
||||||
|
i2c:
|
||||||
|
'0x0a':
|
||||||
|
name: SGTL5000
|
||||||
|
device: SGTL5000XNAA3/R2
|
||||||
|
-->
|
||||||
|
#Audio Z
|
||||||
|
|
||||||
|
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||||
|
|
||||||
|
## Features ##
|
||||||
|
|
||||||
|
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||||
|
* Raspberry Pi 2, 3 PCB footprint.
|
||||||
|
* SGTL5000 low power stereo codec.
|
||||||
|
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||||
|
* RCA jacks for stereo Line In, and Line Out.
|
||||||
|
* 4 pin screw terminal for Speaker Out.
|
||||||
|
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||||
|
* ADC > 90 dB SNR and -72 dB THD+N
|
||||||
|
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||||
|
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||||
|
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||||
|
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||||
|
* 2x20pin 2.54mm female header included!
|
@ -73,7 +73,6 @@ overlays:
|
|||||||
- explorer-hat
|
- explorer-hat
|
||||||
- explorer-hat-pro
|
- explorer-hat-pro
|
||||||
- explorer-phat
|
- explorer-phat
|
||||||
- fepi-audio-z
|
|
||||||
- fourletter-phat
|
- fourletter-phat
|
||||||
- hyperpixel
|
- hyperpixel
|
||||||
- icubex-pishield
|
- icubex-pishield
|
||||||
@ -159,3 +158,4 @@ overlays:
|
|||||||
- waveshare-rgb-led-phat-4x8
|
- waveshare-rgb-led-phat-4x8
|
||||||
- waveshare-rgb-led-hat-8x8
|
- waveshare-rgb-led-hat-8x8
|
||||||
- monarco-hat
|
- monarco-hat
|
||||||
|
- fepi-audio
|
||||||
|
@ -124,7 +124,6 @@ overlays:
|
|||||||
- motozero
|
- motozero
|
||||||
- adafruit-joybonnet
|
- adafruit-joybonnet
|
||||||
- vandenbosch-gpio-input
|
- vandenbosch-gpio-input
|
||||||
- fepi-audio-z
|
|
||||||
- energenie-pi-mote
|
- energenie-pi-mote
|
||||||
- sixfab-cellular-shield
|
- sixfab-cellular-shield
|
||||||
- sixfab-gps-shield
|
- sixfab-gps-shield
|
||||||
@ -159,3 +158,4 @@ overlays:
|
|||||||
- waveshare-rgb-led-phat-4x8
|
- waveshare-rgb-led-phat-4x8
|
||||||
- waveshare-rgb-led-hat-8x8
|
- waveshare-rgb-led-hat-8x8
|
||||||
- monarco-hat
|
- monarco-hat
|
||||||
|
- fepi-audio
|
||||||
|
66
src/es/translate/fepi-audio.md
Normal file
66
src/es/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Fe-Pi Audio Card
|
||||||
|
class: board
|
||||||
|
type: audio
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: FePi
|
||||||
|
description: A complete audio solution for the Raspberry Pi
|
||||||
|
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
image: 'fepi-audio.png'
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'25':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: BCLK (Bit Clock)
|
||||||
|
mode: i2s
|
||||||
|
'35':
|
||||||
|
name: LRCLK (Left/Right Clock)
|
||||||
|
mode: i2s
|
||||||
|
'38':
|
||||||
|
name: DIN (Data In)
|
||||||
|
mode: i2s
|
||||||
|
'40':
|
||||||
|
name: DOUT (Data Out)
|
||||||
|
mode: i2s
|
||||||
|
i2c:
|
||||||
|
'0x0a':
|
||||||
|
name: SGTL5000
|
||||||
|
device: SGTL5000XNAA3/R2
|
||||||
|
-->
|
||||||
|
#Audio Z
|
||||||
|
|
||||||
|
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||||
|
|
||||||
|
## Features ##
|
||||||
|
|
||||||
|
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||||
|
* Raspberry Pi 2, 3 PCB footprint.
|
||||||
|
* SGTL5000 low power stereo codec.
|
||||||
|
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||||
|
* RCA jacks for stereo Line In, and Line Out.
|
||||||
|
* 4 pin screw terminal for Speaker Out.
|
||||||
|
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||||
|
* ADC > 90 dB SNR and -72 dB THD+N
|
||||||
|
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||||
|
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||||
|
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||||
|
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||||
|
* 2x20pin 2.54mm female header included!
|
@ -125,7 +125,6 @@ overlays:
|
|||||||
- adafruit-joybonnet
|
- adafruit-joybonnet
|
||||||
- vandenbosch-gpio-input
|
- vandenbosch-gpio-input
|
||||||
|
|
||||||
- fepi-audio-z
|
|
||||||
- energenie-pi-mote
|
- energenie-pi-mote
|
||||||
- sixfab-cellular-shield
|
- sixfab-cellular-shield
|
||||||
- sixfab-gps-shield
|
- sixfab-gps-shield
|
||||||
@ -160,3 +159,4 @@ overlays:
|
|||||||
- waveshare-rgb-led-phat-4x8
|
- waveshare-rgb-led-phat-4x8
|
||||||
- waveshare-rgb-led-hat-8x8
|
- waveshare-rgb-led-hat-8x8
|
||||||
- monarco-hat
|
- monarco-hat
|
||||||
|
- fepi-audio
|
||||||
|
66
src/fr/translate/fepi-audio.md
Normal file
66
src/fr/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Fe-Pi Audio Card
|
||||||
|
class: board
|
||||||
|
type: audio
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: FePi
|
||||||
|
description: A complete audio solution for the Raspberry Pi
|
||||||
|
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
image: 'fepi-audio.png'
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'25':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: BCLK (Bit Clock)
|
||||||
|
mode: i2s
|
||||||
|
'35':
|
||||||
|
name: LRCLK (Left/Right Clock)
|
||||||
|
mode: i2s
|
||||||
|
'38':
|
||||||
|
name: DIN (Data In)
|
||||||
|
mode: i2s
|
||||||
|
'40':
|
||||||
|
name: DOUT (Data Out)
|
||||||
|
mode: i2s
|
||||||
|
i2c:
|
||||||
|
'0x0a':
|
||||||
|
name: SGTL5000
|
||||||
|
device: SGTL5000XNAA3/R2
|
||||||
|
-->
|
||||||
|
#Audio Z
|
||||||
|
|
||||||
|
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||||
|
|
||||||
|
## Features ##
|
||||||
|
|
||||||
|
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||||
|
* Raspberry Pi 2, 3 PCB footprint.
|
||||||
|
* SGTL5000 low power stereo codec.
|
||||||
|
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||||
|
* RCA jacks for stereo Line In, and Line Out.
|
||||||
|
* 4 pin screw terminal for Speaker Out.
|
||||||
|
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||||
|
* ADC > 90 dB SNR and -72 dB THD+N
|
||||||
|
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||||
|
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||||
|
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||||
|
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||||
|
* 2x20pin 2.54mm female header included!
|
@ -125,7 +125,6 @@ overlays:
|
|||||||
- adafruit-joybonnet
|
- adafruit-joybonnet
|
||||||
- vandenbosch-gpio-input
|
- vandenbosch-gpio-input
|
||||||
|
|
||||||
- fepi-audio-z
|
|
||||||
- energenie-pi-mote
|
- energenie-pi-mote
|
||||||
- sixfab-cellular-shield
|
- sixfab-cellular-shield
|
||||||
- sixfab-gps-shield
|
- sixfab-gps-shield
|
||||||
@ -160,3 +159,4 @@ overlays:
|
|||||||
- waveshare-rgb-led-phat-4x8
|
- waveshare-rgb-led-phat-4x8
|
||||||
- waveshare-rgb-led-hat-8x8
|
- waveshare-rgb-led-hat-8x8
|
||||||
- monarco-hat
|
- monarco-hat
|
||||||
|
- fepi-audio
|
||||||
|
66
src/it/translate/fepi-audio.md
Normal file
66
src/it/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Fe-Pi Audio Card
|
||||||
|
class: board
|
||||||
|
type: audio
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: FePi
|
||||||
|
description: A complete audio solution for the Raspberry Pi
|
||||||
|
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
image: 'fepi-audio.png'
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'25':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: BCLK (Bit Clock)
|
||||||
|
mode: i2s
|
||||||
|
'35':
|
||||||
|
name: LRCLK (Left/Right Clock)
|
||||||
|
mode: i2s
|
||||||
|
'38':
|
||||||
|
name: DIN (Data In)
|
||||||
|
mode: i2s
|
||||||
|
'40':
|
||||||
|
name: DOUT (Data Out)
|
||||||
|
mode: i2s
|
||||||
|
i2c:
|
||||||
|
'0x0a':
|
||||||
|
name: SGTL5000
|
||||||
|
device: SGTL5000XNAA3/R2
|
||||||
|
-->
|
||||||
|
#Audio Z
|
||||||
|
|
||||||
|
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||||
|
|
||||||
|
## Features ##
|
||||||
|
|
||||||
|
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||||
|
* Raspberry Pi 2, 3 PCB footprint.
|
||||||
|
* SGTL5000 low power stereo codec.
|
||||||
|
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||||
|
* RCA jacks for stereo Line In, and Line Out.
|
||||||
|
* 4 pin screw terminal for Speaker Out.
|
||||||
|
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||||
|
* ADC > 90 dB SNR and -72 dB THD+N
|
||||||
|
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||||
|
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||||
|
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||||
|
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||||
|
* 2x20pin 2.54mm female header included!
|
@ -125,7 +125,6 @@ overlays:
|
|||||||
- adafruit-joybonnet
|
- adafruit-joybonnet
|
||||||
- vandenbosch-gpio-input
|
- vandenbosch-gpio-input
|
||||||
|
|
||||||
- fepi-audio-z
|
|
||||||
- energenie-pi-mote
|
- energenie-pi-mote
|
||||||
- sixfab-cellular-shield
|
- sixfab-cellular-shield
|
||||||
- sixfab-gps-shield
|
- sixfab-gps-shield
|
||||||
@ -160,3 +159,4 @@ overlays:
|
|||||||
- waveshare-rgb-led-phat-4x8
|
- waveshare-rgb-led-phat-4x8
|
||||||
- waveshare-rgb-led-hat-8x8
|
- waveshare-rgb-led-hat-8x8
|
||||||
- monarco-hat
|
- monarco-hat
|
||||||
|
- fepi-audio
|
||||||
|
66
src/tr/translate/fepi-audio.md
Normal file
66
src/tr/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
|||||||
|
<!--
|
||||||
|
---
|
||||||
|
name: Fe-Pi Audio Card
|
||||||
|
class: board
|
||||||
|
type: audio
|
||||||
|
formfactor: HAT
|
||||||
|
manufacturer: FePi
|
||||||
|
description: A complete audio solution for the Raspberry Pi
|
||||||
|
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||||
|
image: 'fepi-audio.png'
|
||||||
|
pincount: 40
|
||||||
|
eeprom: no
|
||||||
|
power:
|
||||||
|
'1':
|
||||||
|
'2':
|
||||||
|
ground:
|
||||||
|
'6':
|
||||||
|
'9':
|
||||||
|
'14':
|
||||||
|
'20':
|
||||||
|
'25':
|
||||||
|
'30':
|
||||||
|
'34':
|
||||||
|
'39':
|
||||||
|
pin:
|
||||||
|
'3':
|
||||||
|
mode: i2c
|
||||||
|
'5':
|
||||||
|
mode: i2c
|
||||||
|
'12':
|
||||||
|
name: BCLK (Bit Clock)
|
||||||
|
mode: i2s
|
||||||
|
'35':
|
||||||
|
name: LRCLK (Left/Right Clock)
|
||||||
|
mode: i2s
|
||||||
|
'38':
|
||||||
|
name: DIN (Data In)
|
||||||
|
mode: i2s
|
||||||
|
'40':
|
||||||
|
name: DOUT (Data Out)
|
||||||
|
mode: i2s
|
||||||
|
i2c:
|
||||||
|
'0x0a':
|
||||||
|
name: SGTL5000
|
||||||
|
device: SGTL5000XNAA3/R2
|
||||||
|
-->
|
||||||
|
#Audio Z
|
||||||
|
|
||||||
|
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||||
|
|
||||||
|
## Features ##
|
||||||
|
|
||||||
|
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||||
|
* Raspberry Pi 2, 3 PCB footprint.
|
||||||
|
* SGTL5000 low power stereo codec.
|
||||||
|
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||||
|
* RCA jacks for stereo Line In, and Line Out.
|
||||||
|
* 4 pin screw terminal for Speaker Out.
|
||||||
|
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||||
|
* ADC > 90 dB SNR and -72 dB THD+N
|
||||||
|
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||||
|
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||||
|
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||||
|
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||||
|
* 2x20pin 2.54mm female header included!
|
Loading…
Reference in New Issue
Block a user