Merge branch 'Fe-Pi-master'
This commit is contained in:
commit
14ad829aea
BIN
resources/boards/fepi-audio.png
Normal file
BIN
resources/boards/fepi-audio.png
Normal file
Binary file not shown.
After Width: | Height: | Size: 110 KiB |
@ -125,7 +125,6 @@ overlays:
|
||||
- adafruit-joybonnet
|
||||
- vandenbosch-gpio-input
|
||||
|
||||
- fepi-audio-z
|
||||
- energenie-pi-mote
|
||||
- sixfab-cellular-shield
|
||||
- sixfab-gps-shield
|
||||
@ -160,3 +159,4 @@ overlays:
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
- fepi-audio
|
||||
|
66
src/de/translate/fepi-audio.md
Normal file
66
src/de/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
||||
<!--
|
||||
---
|
||||
name: Fe-Pi Audio Card
|
||||
class: board
|
||||
type: audio
|
||||
formfactor: HAT
|
||||
manufacturer: FePi
|
||||
description: A complete audio solution for the Raspberry Pi
|
||||
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
image: 'fepi-audio.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'12':
|
||||
name: BCLK (Bit Clock)
|
||||
mode: i2s
|
||||
'35':
|
||||
name: LRCLK (Left/Right Clock)
|
||||
mode: i2s
|
||||
'38':
|
||||
name: DIN (Data In)
|
||||
mode: i2s
|
||||
'40':
|
||||
name: DOUT (Data Out)
|
||||
mode: i2s
|
||||
i2c:
|
||||
'0x0a':
|
||||
name: SGTL5000
|
||||
device: SGTL5000XNAA3/R2
|
||||
-->
|
||||
#Audio Z
|
||||
|
||||
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||
|
||||
## Features ##
|
||||
|
||||
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||
* Raspberry Pi 2, 3 PCB footprint.
|
||||
* SGTL5000 low power stereo codec.
|
||||
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||
* RCA jacks for stereo Line In, and Line Out.
|
||||
* 4 pin screw terminal for Speaker Out.
|
||||
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||
* ADC > 90 dB SNR and -72 dB THD+N
|
||||
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||
* 2x20pin 2.54mm female header included!
|
66
src/en/overlay/fepi-audio.md
Normal file
66
src/en/overlay/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
||||
<!--
|
||||
---
|
||||
name: Fe-Pi Audio Card
|
||||
class: board
|
||||
type: audio
|
||||
formfactor: HAT
|
||||
manufacturer: FePi
|
||||
description: A complete audio solution for the Raspberry Pi
|
||||
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
image: 'fepi-audio.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'12':
|
||||
name: BCLK (Bit Clock)
|
||||
mode: i2s
|
||||
'35':
|
||||
name: LRCLK (Left/Right Clock)
|
||||
mode: i2s
|
||||
'38':
|
||||
name: DIN (Data In)
|
||||
mode: i2s
|
||||
'40':
|
||||
name: DOUT (Data Out)
|
||||
mode: i2s
|
||||
i2c:
|
||||
'0x0a':
|
||||
name: SGTL5000
|
||||
device: SGTL5000XNAA3/R2
|
||||
-->
|
||||
#Audio Z
|
||||
|
||||
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||
|
||||
## Features ##
|
||||
|
||||
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||
* Raspberry Pi 2, 3 PCB footprint.
|
||||
* SGTL5000 low power stereo codec.
|
||||
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||
* RCA jacks for stereo Line In, and Line Out.
|
||||
* 4 pin screw terminal for Speaker Out.
|
||||
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||
* ADC > 90 dB SNR and -72 dB THD+N
|
||||
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||
* 2x20pin 2.54mm female header included!
|
@ -73,7 +73,6 @@ overlays:
|
||||
- explorer-hat
|
||||
- explorer-hat-pro
|
||||
- explorer-phat
|
||||
- fepi-audio-z
|
||||
- fourletter-phat
|
||||
- hyperpixel
|
||||
- icubex-pishield
|
||||
@ -159,3 +158,4 @@ overlays:
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
- fepi-audio
|
||||
|
@ -124,7 +124,6 @@ overlays:
|
||||
- motozero
|
||||
- adafruit-joybonnet
|
||||
- vandenbosch-gpio-input
|
||||
- fepi-audio-z
|
||||
- energenie-pi-mote
|
||||
- sixfab-cellular-shield
|
||||
- sixfab-gps-shield
|
||||
@ -159,3 +158,4 @@ overlays:
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
- fepi-audio
|
||||
|
66
src/es/translate/fepi-audio.md
Normal file
66
src/es/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
||||
<!--
|
||||
---
|
||||
name: Fe-Pi Audio Card
|
||||
class: board
|
||||
type: audio
|
||||
formfactor: HAT
|
||||
manufacturer: FePi
|
||||
description: A complete audio solution for the Raspberry Pi
|
||||
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
image: 'fepi-audio.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'12':
|
||||
name: BCLK (Bit Clock)
|
||||
mode: i2s
|
||||
'35':
|
||||
name: LRCLK (Left/Right Clock)
|
||||
mode: i2s
|
||||
'38':
|
||||
name: DIN (Data In)
|
||||
mode: i2s
|
||||
'40':
|
||||
name: DOUT (Data Out)
|
||||
mode: i2s
|
||||
i2c:
|
||||
'0x0a':
|
||||
name: SGTL5000
|
||||
device: SGTL5000XNAA3/R2
|
||||
-->
|
||||
#Audio Z
|
||||
|
||||
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||
|
||||
## Features ##
|
||||
|
||||
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||
* Raspberry Pi 2, 3 PCB footprint.
|
||||
* SGTL5000 low power stereo codec.
|
||||
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||
* RCA jacks for stereo Line In, and Line Out.
|
||||
* 4 pin screw terminal for Speaker Out.
|
||||
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||
* ADC > 90 dB SNR and -72 dB THD+N
|
||||
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||
* 2x20pin 2.54mm female header included!
|
@ -125,7 +125,6 @@ overlays:
|
||||
- adafruit-joybonnet
|
||||
- vandenbosch-gpio-input
|
||||
|
||||
- fepi-audio-z
|
||||
- energenie-pi-mote
|
||||
- sixfab-cellular-shield
|
||||
- sixfab-gps-shield
|
||||
@ -160,3 +159,4 @@ overlays:
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
- fepi-audio
|
||||
|
66
src/fr/translate/fepi-audio.md
Normal file
66
src/fr/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
||||
<!--
|
||||
---
|
||||
name: Fe-Pi Audio Card
|
||||
class: board
|
||||
type: audio
|
||||
formfactor: HAT
|
||||
manufacturer: FePi
|
||||
description: A complete audio solution for the Raspberry Pi
|
||||
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
image: 'fepi-audio.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'12':
|
||||
name: BCLK (Bit Clock)
|
||||
mode: i2s
|
||||
'35':
|
||||
name: LRCLK (Left/Right Clock)
|
||||
mode: i2s
|
||||
'38':
|
||||
name: DIN (Data In)
|
||||
mode: i2s
|
||||
'40':
|
||||
name: DOUT (Data Out)
|
||||
mode: i2s
|
||||
i2c:
|
||||
'0x0a':
|
||||
name: SGTL5000
|
||||
device: SGTL5000XNAA3/R2
|
||||
-->
|
||||
#Audio Z
|
||||
|
||||
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||
|
||||
## Features ##
|
||||
|
||||
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||
* Raspberry Pi 2, 3 PCB footprint.
|
||||
* SGTL5000 low power stereo codec.
|
||||
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||
* RCA jacks for stereo Line In, and Line Out.
|
||||
* 4 pin screw terminal for Speaker Out.
|
||||
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||
* ADC > 90 dB SNR and -72 dB THD+N
|
||||
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||
* 2x20pin 2.54mm female header included!
|
@ -125,7 +125,6 @@ overlays:
|
||||
- adafruit-joybonnet
|
||||
- vandenbosch-gpio-input
|
||||
|
||||
- fepi-audio-z
|
||||
- energenie-pi-mote
|
||||
- sixfab-cellular-shield
|
||||
- sixfab-gps-shield
|
||||
@ -160,3 +159,4 @@ overlays:
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
- fepi-audio
|
||||
|
66
src/it/translate/fepi-audio.md
Normal file
66
src/it/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
||||
<!--
|
||||
---
|
||||
name: Fe-Pi Audio Card
|
||||
class: board
|
||||
type: audio
|
||||
formfactor: HAT
|
||||
manufacturer: FePi
|
||||
description: A complete audio solution for the Raspberry Pi
|
||||
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
image: 'fepi-audio.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'12':
|
||||
name: BCLK (Bit Clock)
|
||||
mode: i2s
|
||||
'35':
|
||||
name: LRCLK (Left/Right Clock)
|
||||
mode: i2s
|
||||
'38':
|
||||
name: DIN (Data In)
|
||||
mode: i2s
|
||||
'40':
|
||||
name: DOUT (Data Out)
|
||||
mode: i2s
|
||||
i2c:
|
||||
'0x0a':
|
||||
name: SGTL5000
|
||||
device: SGTL5000XNAA3/R2
|
||||
-->
|
||||
#Audio Z
|
||||
|
||||
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||
|
||||
## Features ##
|
||||
|
||||
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||
* Raspberry Pi 2, 3 PCB footprint.
|
||||
* SGTL5000 low power stereo codec.
|
||||
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||
* RCA jacks for stereo Line In, and Line Out.
|
||||
* 4 pin screw terminal for Speaker Out.
|
||||
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||
* ADC > 90 dB SNR and -72 dB THD+N
|
||||
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||
* 2x20pin 2.54mm female header included!
|
@ -125,7 +125,6 @@ overlays:
|
||||
- adafruit-joybonnet
|
||||
- vandenbosch-gpio-input
|
||||
|
||||
- fepi-audio-z
|
||||
- energenie-pi-mote
|
||||
- sixfab-cellular-shield
|
||||
- sixfab-gps-shield
|
||||
@ -160,3 +159,4 @@ overlays:
|
||||
- waveshare-rgb-led-phat-4x8
|
||||
- waveshare-rgb-led-hat-8x8
|
||||
- monarco-hat
|
||||
- fepi-audio
|
||||
|
66
src/tr/translate/fepi-audio.md
Normal file
66
src/tr/translate/fepi-audio.md
Normal file
@ -0,0 +1,66 @@
|
||||
<!--
|
||||
---
|
||||
name: Fe-Pi Audio Card
|
||||
class: board
|
||||
type: audio
|
||||
formfactor: HAT
|
||||
manufacturer: FePi
|
||||
description: A complete audio solution for the Raspberry Pi
|
||||
url: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
buy: https://fe-pi.com/products/fe-pi-audio-v1
|
||||
image: 'fepi-audio.png'
|
||||
pincount: 40
|
||||
eeprom: no
|
||||
power:
|
||||
'1':
|
||||
'2':
|
||||
ground:
|
||||
'6':
|
||||
'9':
|
||||
'14':
|
||||
'20':
|
||||
'25':
|
||||
'30':
|
||||
'34':
|
||||
'39':
|
||||
pin:
|
||||
'3':
|
||||
mode: i2c
|
||||
'5':
|
||||
mode: i2c
|
||||
'12':
|
||||
name: BCLK (Bit Clock)
|
||||
mode: i2s
|
||||
'35':
|
||||
name: LRCLK (Left/Right Clock)
|
||||
mode: i2s
|
||||
'38':
|
||||
name: DIN (Data In)
|
||||
mode: i2s
|
||||
'40':
|
||||
name: DOUT (Data Out)
|
||||
mode: i2s
|
||||
i2c:
|
||||
'0x0a':
|
||||
name: SGTL5000
|
||||
device: SGTL5000XNAA3/R2
|
||||
-->
|
||||
#Audio Z
|
||||
|
||||
The Fe-Pi Audio is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.
|
||||
|
||||
## Features ##
|
||||
|
||||
* SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use.
|
||||
* Raspberry Pi 2, 3 PCB footprint.
|
||||
* SGTL5000 low power stereo codec.
|
||||
* 3.5 mm, 4 contact, jack for Headphone/MIC (black).
|
||||
* RCA jacks for stereo Line In, and Line Out.
|
||||
* 4 pin screw terminal for Speaker Out.
|
||||
* At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used!
|
||||
* ADC > 90 dB SNR and -72 dB THD+N
|
||||
* Line-Out > 100 dB SNR and -85 dB THD+N
|
||||
* HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.
|
||||
* Speaker Output > 1.4W per channel, into 8 ohms.
|
||||
* Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.
|
||||
* 2x20pin 2.54mm female header included!
|
Loading…
Reference in New Issue
Block a user