Explorer HAT (non pro) fix all LANG + more FR overlays
This commit is contained in:
parent
8ea4777319
commit
958e8467f1
@ -7,6 +7,8 @@ github: https://github.com/pimoroni/explorer-hat
|
||||
buy: http://shop.pimoroni.com/products/explorer-hat
|
||||
description: An all-in-one light, input, motor, touch and output add-on board.
|
||||
install:
|
||||
'devices':
|
||||
- 'i2c'
|
||||
'apt':
|
||||
- 'python-smbus'
|
||||
- 'python3-smbus'
|
||||
@ -14,6 +16,8 @@ install:
|
||||
- 'python3-dev'
|
||||
'python':
|
||||
- 'explorerhat'
|
||||
'python3':
|
||||
- 'explorerhat'
|
||||
'examples': 'examples/'
|
||||
pincount: 40
|
||||
i2c:
|
||||
@ -98,7 +102,7 @@ pin:
|
||||
mode: output
|
||||
active: high
|
||||
-->
|
||||
#Explorer HAT and Explorer HAT Pro
|
||||
#Explorer HAT Pro
|
||||
|
||||
5V inputs and outputs, touch pads, LEDs, analog inputs and an H-Bridge motor driver make up the Explorer HAT Pro- a jack of all trades prototyping side-kick for your Raspberry Pi.
|
||||
|
||||
|
@ -20,6 +20,10 @@ install:
|
||||
- 'explorerhat'
|
||||
'examples': 'examples/'
|
||||
pincount: 40
|
||||
i2c:
|
||||
'0x28':
|
||||
name: Cap Touch
|
||||
device: cap1208
|
||||
pin:
|
||||
'7':
|
||||
name: LED 1
|
||||
@ -70,9 +74,9 @@ pin:
|
||||
mode: output
|
||||
active: high
|
||||
-->
|
||||
#Explorer HAT and Explorer HAT Pro
|
||||
#Explorer HAT
|
||||
|
||||
5V inputs and outputs, touch pads, LEDs, analog inputs and an H-Bridge motor driver make up the Explorer HAT Pro- a jack of all trades prototyping side-kick for your Raspberry Pi.
|
||||
5V inputs and outputs, touch pads and LEDs make up the Explorer HAT, a jack of all trades prototyping side-kick for your Raspberry Pi.
|
||||
|
||||
To get the HAT set up and ready to go you can use the one-line product installer:
|
||||
|
||||
|
@ -7,6 +7,8 @@ github: https://github.com/pimoroni/explorer-hat
|
||||
buy: http://shop.pimoroni.com/products/explorer-hat
|
||||
description: Una placa completa, con luz, entradas, entradas táctiles y salidas.
|
||||
install:
|
||||
'devices':
|
||||
- 'i2c'
|
||||
'apt':
|
||||
- 'python-smbus'
|
||||
- 'python3-smbus'
|
||||
@ -14,6 +16,8 @@ install:
|
||||
- 'python3-dev'
|
||||
'python':
|
||||
- 'explorerhat'
|
||||
'python3':
|
||||
- 'explorerhat'
|
||||
'examples': 'examples/'
|
||||
pincount: 40
|
||||
i2c:
|
||||
@ -98,7 +102,7 @@ pin:
|
||||
mode: salida
|
||||
active: alto (encendido)
|
||||
-->
|
||||
#Explorer HAT y Explorer HAT Pro
|
||||
#Explorer HAT Pro
|
||||
|
||||
Entradas y salidas de 5V, paneles táctiles, LEDs, entradas analógicas y un Puente-H para controlar motores componen el Explorer HAT Pro.
|
||||
|
||||
|
@ -70,9 +70,9 @@ pin:
|
||||
mode: salida
|
||||
active: alto (encendido)
|
||||
-->
|
||||
#Explorer HAT y Explorer HAT Pro
|
||||
#Explorer HAT
|
||||
|
||||
Entradas y salidas de 5V, paneles táctiles, LEDs, entradas analógicas y un Puente-H para controlar motores componen el Explorer HAT Pro.
|
||||
Entradas y salidas de 5V, paneles táctiles y LEDs componen el Explorer HAT.
|
||||
|
||||
Para preparar e instalar el HAT utiliza la siguiente línea:
|
||||
|
||||
|
@ -3,7 +3,7 @@
|
||||
name: Display-o-Tron HAT
|
||||
manufacturer: Pimoroni
|
||||
url: https://github.com/pimoroni/dot3k
|
||||
description: A 3-line character LCD with a 6-zone RGB backlight and 6 touch buttons
|
||||
description: Un LCD 3x16 avec rétro-éclairage sur 6 zones RGB et buttons tactiles
|
||||
pincount: 40
|
||||
pin:
|
||||
3:
|
||||
@ -17,28 +17,25 @@ pin:
|
||||
19:
|
||||
mode: spi
|
||||
22:
|
||||
name: LCD Register Select
|
||||
name: Selection Registre LCD
|
||||
mode: output
|
||||
23:
|
||||
mode: spi
|
||||
24:
|
||||
name: LCD Chip Select
|
||||
name: Selection Puce LCD
|
||||
mode: chipselect
|
||||
active: high
|
||||
32:
|
||||
name: LCD Reset
|
||||
name: Reset LCD
|
||||
mode: output
|
||||
active: low
|
||||
-->
|
||||
#Display-o-Tron HAT
|
||||
|
||||
Display-o-Tron HAT uses both SPI and I2c to drive the LCD display, backlight and touch.
|
||||
However both of these busses can be shared with other devices.
|
||||
Le chapeau Display-o-Tron est un LCD 3x16 caractères avec rétro-éclairage sur 6 zones RGB et buttons tactiles. Il communique avec la Raspberry Pi par l'intermédiaire des bus SPI et I2C.
|
||||
|
||||
You can use the one-line product installer to get Display-o-Tron HAT set up and ready to go, just:
|
||||
Pour l'installation et mise en route exécutez simplement les commandes ci-dessous et suivez les instructions présentées à l'écran:
|
||||
|
||||
```bash
|
||||
curl get.pimoroni.com/dot3k | bash
|
||||
curl -sS get.pimoroni.com/dot3k | bash
|
||||
```
|
||||
|
||||
And follow the instructions!
|
||||
|
@ -4,7 +4,7 @@ name: Display-o-Tron 3000
|
||||
manufacturer: Pimoroni
|
||||
github: https://github.com/pimoroni/dot3k
|
||||
url: https://github.com/pimoroni/dot3k
|
||||
description: A 3-line character LCD with an RGB backlight and joystick
|
||||
description: Un écran LCD 3 lignes avec rétro-éclairage et joystick
|
||||
install:
|
||||
'devices':
|
||||
- 'i2c'
|
||||
@ -24,29 +24,29 @@ pin:
|
||||
5:
|
||||
mode: i2c
|
||||
7:
|
||||
name: Joystick Button
|
||||
name: bouton Joystick
|
||||
mode: input
|
||||
active: low
|
||||
11:
|
||||
name: Joystick Left
|
||||
name: Joystick gauche
|
||||
mode: input
|
||||
active: low
|
||||
13:
|
||||
name: Joystick Up
|
||||
name: Joystick haut
|
||||
mode: input
|
||||
active: low
|
||||
15:
|
||||
name: Joystick Right
|
||||
name: Joystick droit
|
||||
mode: input
|
||||
active: low
|
||||
19:
|
||||
mode: spi
|
||||
21:
|
||||
name: Joystick Down
|
||||
name: Joystick bas
|
||||
mode: input
|
||||
active: low
|
||||
22:
|
||||
name: LCD CMD/DATA
|
||||
name: Données/Commandes LCD
|
||||
mode: output
|
||||
active: high
|
||||
23:
|
||||
@ -54,10 +54,10 @@ pin:
|
||||
-->
|
||||
#Display-o-Tron 3000
|
||||
|
||||
You can use the one-line product installer to get Display-o-Tron 3000 set up and ready to go, just:
|
||||
Le Display-o-Tron 3000 est un écran LCD avec 3 lignes, rétro-éclairage et joystick
|
||||
|
||||
Pour l'installation et mise en route exécutez simplement les commandes ci-dessous et suivez les instructions présentées à l'écran:
|
||||
|
||||
```bash
|
||||
curl get.pimoroni.com/dot3k | bash
|
||||
curl -sS get.pimoroni.com/dot3k | bash
|
||||
```
|
||||
|
||||
And follow the instructions!
|
||||
|
@ -5,8 +5,10 @@ manufacturer: Pimoroni
|
||||
url: https://github.com/pimoroni/explorer-hat
|
||||
github: https://github.com/pimoroni/explorer-hat
|
||||
buy: http://shop.pimoroni.com/products/explorer-hat
|
||||
description: An all-in-one light, input, motor, touch and output add-on board.
|
||||
description: Un chapeau multi-usage avec entrées analogiques et contrôle moteurs
|
||||
install:
|
||||
'devices':
|
||||
- 'i2c'
|
||||
'apt':
|
||||
- 'python-smbus'
|
||||
- 'python3-smbus'
|
||||
@ -14,14 +16,16 @@ install:
|
||||
- 'python3-dev'
|
||||
'python':
|
||||
- 'explorerhat'
|
||||
'python3':
|
||||
- 'explorerhat'
|
||||
'examples': 'examples/'
|
||||
pincount: 40
|
||||
i2c:
|
||||
'0x28':
|
||||
name: Cap Touch
|
||||
name: Capteur tactile
|
||||
device: cap1208
|
||||
'0x48':
|
||||
name: Analog Input
|
||||
name: Entrées analogiques
|
||||
device: ads1015
|
||||
pin:
|
||||
'3': {}
|
||||
@ -42,21 +46,21 @@ pin:
|
||||
mode: output
|
||||
active: high
|
||||
'15':
|
||||
name: Input 2
|
||||
name: Entrée 2
|
||||
mode: input
|
||||
active: high
|
||||
'16':
|
||||
name: Input 1
|
||||
name: Entrée 1
|
||||
mode: input
|
||||
active: high
|
||||
'18':
|
||||
name: Input 3
|
||||
name: Entrée 3
|
||||
mode: input
|
||||
active: high
|
||||
'19': {}
|
||||
'21': {}
|
||||
'22':
|
||||
name: Input 4
|
||||
name: Entrée 4
|
||||
mode: input
|
||||
active: high
|
||||
'23': {}
|
||||
@ -66,48 +70,49 @@ pin:
|
||||
mode: output
|
||||
active: high
|
||||
'31':
|
||||
name: Output 1
|
||||
name: Sortie 1
|
||||
mode: output
|
||||
active: high
|
||||
'32':
|
||||
name: Output 2
|
||||
name: Sortie 2
|
||||
mode: output
|
||||
active: high
|
||||
'33':
|
||||
name: Output 3
|
||||
name: Sortie 3
|
||||
mode: output
|
||||
active: high
|
||||
'35':
|
||||
name: Motor 1 +
|
||||
name: Moteur 1 +
|
||||
mode: output
|
||||
active: high
|
||||
'36':
|
||||
name: Output 4
|
||||
name: Sortie 4
|
||||
mode: output
|
||||
active: high
|
||||
'37':
|
||||
name: Motor 2 -
|
||||
name: Moteur 2 -
|
||||
mode: output
|
||||
active: high
|
||||
'38':
|
||||
name: Motor 1 -
|
||||
name: Moteur 1 -
|
||||
mode: output
|
||||
active: high
|
||||
'40':
|
||||
name: Motor 2 +
|
||||
name: Moteur 2 +
|
||||
mode: output
|
||||
active: high
|
||||
-->
|
||||
#Explorer HAT and Explorer HAT Pro
|
||||
#Explorer HAT Pro
|
||||
|
||||
5V inputs and outputs, touch pads, LEDs, analog inputs and an H-Bridge motor driver make up the Explorer HAT Pro- a jack of all trades prototyping side-kick for your Raspberry Pi.
|
||||
L'Explorer HAT pro est un chapeau multi-usage avec entrées et sorties en 5V, entrées analogiques et contrôle moteurs. Tout cela agrémenté de LED et touches tactiles. C'est donc d'un véritable couteau Suisse dont il s'agit!
|
||||
|
||||
Pour l'installation et mise en route exécutez simplement les commandes ci-dessous et suivez les instructions présentées à l'écran:
|
||||
|
||||
```bash
|
||||
sudo apt-get install python-pip
|
||||
sudo pip install explorer-hat
|
||||
curl -sS get.pimoroni.com/explorerhat
|
||||
```
|
||||
|
||||
Then import it into your Python script and start tinkering:
|
||||
Puis, sous Python, en guise de test que tout fonctionne bien:
|
||||
|
||||
```bash
|
||||
import explorerhat
|
||||
|
@ -5,7 +5,7 @@ manufacturer: Pimoroni
|
||||
url: https://github.com/pimoroni/explorer-hat
|
||||
github: https://github.com/pimoroni/explorer-hat
|
||||
buy: http://shop.pimoroni.com/products/explorer-hat
|
||||
description: An all-in-one light, input, touch and output add-on board.
|
||||
description: Un chapeau multi-usage avec entrées et sorties 5V
|
||||
install:
|
||||
'devices':
|
||||
- 'i2c'
|
||||
@ -20,6 +20,10 @@ install:
|
||||
- 'explorerhat'
|
||||
'examples': 'examples/'
|
||||
pincount: 40
|
||||
i2c:
|
||||
'0x28':
|
||||
name: Capteur tactile
|
||||
device: cap1208
|
||||
pin:
|
||||
'7':
|
||||
name: LED 1
|
||||
@ -34,19 +38,19 @@ pin:
|
||||
mode: output
|
||||
active: high
|
||||
'15':
|
||||
name: Input 2
|
||||
name: Entrée 2
|
||||
mode: input
|
||||
active: high
|
||||
'16':
|
||||
name: Input 1
|
||||
name: Entrée 1
|
||||
mode: input
|
||||
active: high
|
||||
'18':
|
||||
name: Input 3
|
||||
name: Entrée 3
|
||||
mode: input
|
||||
active: high
|
||||
'22':
|
||||
name: Input 4
|
||||
name: Entrée 4
|
||||
mode: input
|
||||
active: high
|
||||
'29':
|
||||
@ -54,32 +58,33 @@ pin:
|
||||
mode: output
|
||||
active: high
|
||||
'31':
|
||||
name: Output 1
|
||||
name: Sortie 1
|
||||
mode: output
|
||||
active: high
|
||||
'32':
|
||||
name: Output 2
|
||||
name: Sortie 2
|
||||
mode: output
|
||||
active: high
|
||||
'33':
|
||||
name: Output 3
|
||||
name: Sortie 3
|
||||
mode: output
|
||||
active: high
|
||||
'36':
|
||||
name: Output 4
|
||||
name: Sortie 4
|
||||
mode: output
|
||||
active: high
|
||||
-->
|
||||
#Explorer HAT and Explorer HAT Pro
|
||||
#Explorer HAT
|
||||
|
||||
5V inputs and outputs, touch pads, LEDs, analog inputs and an H-Bridge motor driver make up the Explorer HAT Pro- a jack of all trades prototyping side-kick for your Raspberry Pi.
|
||||
L'Explorer HAT est un chapeau multi-usage avec entrées et sorties en 5V, LED et touches tactiles. Une extension utile pour tout prototype!
|
||||
|
||||
Pour l'installation et mise en route exécutez simplement les commandes ci-dessous et suivez les instructions présentées à l'écran:
|
||||
|
||||
```bash
|
||||
sudo apt-get install python-pip
|
||||
sudo pip install explorer-hat
|
||||
curl -sS get.pimoroni.com/explorerhat
|
||||
```
|
||||
|
||||
Then import it into your Python script and start tinkering:
|
||||
Puis, sous Python, en guise de test que tout fonctionne bien:
|
||||
|
||||
```bash
|
||||
import explorerhat
|
||||
|
@ -3,15 +3,15 @@
|
||||
name: Piano HAT
|
||||
manufacturer: Pimoroni
|
||||
url: https://github.com/pimoroni/piano-hat
|
||||
description: A tiny Pi piano with 16 touch-sensitive buttons
|
||||
description: Un mini-piano avec 16 touches tactiles
|
||||
pincount: 40
|
||||
i2c:
|
||||
'0x28':
|
||||
name: Cap Touch A
|
||||
name: Capteur tactile A
|
||||
device: cap1188
|
||||
datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/CAP1188%20.pdf
|
||||
'0x2b':
|
||||
name: Cap Touch B
|
||||
name: Capteur tactile B
|
||||
device: cap1188
|
||||
datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/CAP1188%20.pdf
|
||||
pin:
|
||||
@ -20,13 +20,13 @@ pin:
|
||||
5:
|
||||
mode: i2c
|
||||
7:
|
||||
name: Alert A
|
||||
name: Alerte A
|
||||
mode: input
|
||||
11:
|
||||
name: Reset A
|
||||
mode: output
|
||||
13:
|
||||
name: Alert B
|
||||
name: Alerte B
|
||||
mode: input
|
||||
15:
|
||||
name: Reset B
|
||||
@ -34,14 +34,12 @@ pin:
|
||||
-->
|
||||
#Piano HAT
|
||||
|
||||
Piano HAT has 16 touch-sensitive buttons. 13 of these are a single Piano octave, the rest give you octave up/down and instrument select functionality.
|
||||
Le Piano HAT est un mini-piano pour la RasPi muni de 16 touches tactiles. 13 d'entre elles forment le clavier en lui-même, s'étendant sur une octave. Les autres quant à elles servent à déplacer l'octave vers le haut ou le bas, ainsi que la sélection d'instrument.
|
||||
|
||||
It uses two Microchip CAP1188 chips with the i2c addresses 0x28 and 0x2b.
|
||||
Les microchips responsables de la gestion des touches tactiles sont deux CAP1188, communiquant par l'interface i2c, aux adresses 0x28 et 0x2b.
|
||||
|
||||
You can use the one-line product installer to get Piano HAT set up and ready to go, just:
|
||||
Pour l'installation et mise en route exécutez simplement les commandes ci-dessous et suivez les instructions présentées à l'écran:
|
||||
|
||||
```bash
|
||||
curl get.pimoroni.com/pianohat | bash
|
||||
curl -sS get.pimoroni.com/pianohat | bash
|
||||
```
|
||||
|
||||
And follow the instructions!
|
||||
|
@ -7,6 +7,19 @@ github: https://github.com/pimoroni/explorer-hat
|
||||
buy: http://shop.pimoroni.com/products/explorer-hat
|
||||
description: Hepsi-bir-arada, hafif, hızlı, dokunma, giriş ve çıkış destekleyen eklenti
|
||||
kartı.
|
||||
install:
|
||||
'devices':
|
||||
- 'i2c'
|
||||
'apt':
|
||||
- 'python-smbus'
|
||||
- 'python3-smbus'
|
||||
- 'python-dev'
|
||||
- 'python3-dev'
|
||||
'python':
|
||||
- 'explorerhat'
|
||||
'python3':
|
||||
- 'explorerhat'
|
||||
'examples': 'examples/'
|
||||
pincount: 40
|
||||
i2c:
|
||||
'0x28':
|
||||
@ -90,7 +103,7 @@ pin:
|
||||
mode: output
|
||||
active: high
|
||||
-->
|
||||
#Explorer HAT ve Explorer HAT Pro
|
||||
#Explorer HAT Pro
|
||||
|
||||
5V giriş ve çıkışları, dokunmatik paneli, LEDler, analog girişler ve bir H-Bridge motor ile Explorer HAT Pro, Raspberry Pi'de prototipleme için tam teşekkürlü bir araç olarak teşkil etmekte.
|
||||
|
||||
|
@ -7,6 +7,19 @@ github: https://github.com/pimoroni/explorer-hat
|
||||
buy: http://shop.pimoroni.com/products/explorer-hat
|
||||
description: Hepsi-bir-arada, hafif, hızlı, dokunma, giriş ve çıkış destekleyen eklenti
|
||||
kartı.
|
||||
install:
|
||||
'devices':
|
||||
- 'i2c'
|
||||
'apt':
|
||||
- 'python-smbus'
|
||||
- 'python3-smbus'
|
||||
- 'python-dev'
|
||||
- 'python3-dev'
|
||||
'python':
|
||||
- 'explorerhat'
|
||||
'python3':
|
||||
- 'explorerhat'
|
||||
'examples': 'examples/'
|
||||
pincount: 40
|
||||
pin:
|
||||
'7':
|
||||
@ -58,9 +71,9 @@ pin:
|
||||
mode: output
|
||||
active: high
|
||||
-->
|
||||
#Explorer HAT ve Explorer HAT Pro
|
||||
#Explorer HAT
|
||||
|
||||
5V giriş ve çıkışları, dokunmatik paneli, LEDler, analog girişler ve bir H-Bridge motor ile Explorer HAT Pro, Raspberry Pi'de prototipleme için tam teşekkürlü bir araç olarak teşkil etmekte.
|
||||
5V giriş ve çıkışları, dokunmatik paneli ve LEDler ile Explorer HAT, Raspberry Pi'de prototipleme için tam teşekkürlü bir araç olarak teşkil etmekte.
|
||||
|
||||
```bash
|
||||
curl -sS get.pimoroni.com/explorerhat
|
||||
|
Loading…
Reference in New Issue
Block a user