schematic for all AB boards

src/de/translate/ab-1-wire-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 image: 'ab-1-wire-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wi
 
 I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
 
-[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")

src/de/translate/ab-1-wire-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 image: 'ab-1-wire-pi-zero.png'
 pincount: 40
@@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wi
 
 I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
 
-[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")

src/de/translate/ab-adc-differential-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-differential-pi.png'
 pincount: 40
@@ -59,4 +60,4 @@ The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter des
     - 240 SPS (12 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.

src/de/translate/ab-adc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-plus.png'
 pincount: 40
@@ -59,4 +60,4 @@ The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to
    - 240 SPS (11 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/de/translate/ab-adc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
 buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-zero.png'
 pincount: 40
@@ -57,4 +58,4 @@ The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to
    - 240 SPS (11 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/de/translate/ab-adcdac-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
 url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 image: 'ab-adcdac-pi-zero.png'
 pincount: 40
@@ -48,4 +49,4 @@ Max ADC Sample Rate: 100 ksamples/sec
 
 Max ADC Sample Rate under Python: 12,000 samples per second.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/de/translate/ab-io-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 32 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 image: 'ab-io-pi-plus.png'
 pincount: 40
@@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/de/translate/ab-io-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 image: 'ab-io-pi-zero.png'
 pincount: 40
@@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/de/translate/ab-rs485-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS485 Converter
 url: https://www.abelectronics.co.uk/p/77/RS485-Pi
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
 image: 'ab-rs485-pi.png'
 pincount: 40
@@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/de/translate/ab-rtc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 image: 'ab-rtc-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/de/translate/ab-rtc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 image: 'ab-rtc-pi-zero.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Zero is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/de/translate/ab-serial-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
 buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 image: 'ab-serial-pi-plus.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/de/translate/ab-serial-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 image: 'ab-serial-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/de/translate/ab-servo-pwm-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16-channel, 12-bit PWM Controller
 url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 image: 'ab-servo-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
 
 The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/de/translate/sense-hat.md

@@ -5,12 +5,12 @@ class: board
 type: led,sensor
 formfactor: HAT
 manufacturer: Raspberry Pi
-image: 'sense-hat.png'
 description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
 url: https://www.raspberrypi.org/products/sense-hat/
 github: https://github.com/RPi-Distro/python-sense-hat
 schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
 buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
+image: 'sense-hat.png'
 pincount: 40
 eeprom: setup
 power:

src/en/overlay/ab-1-wire-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 image: 'ab-1-wire-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wi
 
 I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
 
-[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")

src/en/overlay/ab-1-wire-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 image: 'ab-1-wire-pi-zero.png'
 pincount: 40
@@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wi
 
 I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
 
-[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")

src/en/overlay/ab-adc-differential-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-differential-pi.png'
 pincount: 40
@@ -59,4 +60,4 @@ The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter des
     - 240 SPS (12 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.

src/en/overlay/ab-adc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-plus.png'
 pincount: 40
@@ -59,4 +60,4 @@ The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to
    - 240 SPS (11 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/en/overlay/ab-adc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
 buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-zero.png'
 pincount: 40
@@ -57,4 +58,4 @@ The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to
    - 240 SPS (11 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/en/overlay/ab-adcdac-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
 url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 image: 'ab-adcdac-pi-zero.png'
 pincount: 40
@@ -48,4 +49,4 @@ Max ADC Sample Rate: 100 ksamples/sec
 
 Max ADC Sample Rate under Python: 12,000 samples per second.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/en/overlay/ab-io-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 32 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 image: 'ab-io-pi-plus.png'
 pincount: 40
@@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/en/overlay/ab-io-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 image: 'ab-io-pi-zero.png'
 pincount: 40
@@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/en/overlay/ab-rs485-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS485 Converter
 url: https://www.abelectronics.co.uk/p/77/RS485-Pi
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
 image: 'ab-rs485-pi.png'
 pincount: 40
@@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/en/overlay/ab-rtc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 image: 'ab-rtc-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/en/overlay/ab-rtc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 image: 'ab-rtc-pi-zero.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Zero is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/en/overlay/ab-serial-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
 buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 image: 'ab-serial-pi-plus.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/en/overlay/ab-serial-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 image: 'ab-serial-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/en/overlay/ab-servo-pwm-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16-channel, 12-bit PWM Controller
 url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 image: 'ab-servo-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
 
 The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/en/overlay/sense-hat.md

@@ -5,12 +5,12 @@ class: board
 type: led,sensor
 formfactor: HAT
 manufacturer: Raspberry Pi
-image: 'sense-hat.png'
 description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
 url: https://www.raspberrypi.org/products/sense-hat/
 github: https://github.com/RPi-Distro/python-sense-hat
 schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
 buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
+image: 'sense-hat.png'
 pincount: 40
 eeprom: setup
 power:

src/en/settings.yaml

@@ -41,7 +41,7 @@ strings:
 - boards_subtitle: 'Click on a HAT, pHAT or add-on for more details and to see which pins it uses!'
 featured:
 - pijack
-- ab-servo-pwm-pi-zero
+- mote-phat
 - 4tronix-picon-zero
 - wifi-pants
 overlays:

src/es/overlay/ab-1-wire-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.png
 buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 image: 'ab-1-wire-pi-plus.png'
 pincount: 40

src/es/overlay/ab-1-wire-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.png
 buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 image: 'ab-1-wire-pi-zero.png'
 pincount: 40

src/es/overlay/ab-adc-differential-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-differential-pi.png'
 pincount: 40

src/es/overlay/ab-adc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-plus.png'
 pincount: 40

src/es/overlay/ab-adc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
 buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-zero.png'
 pincount: 40

src/es/overlay/ab-adcdac-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
 url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 image: 'ab-adcdac-pi-zero.png'
 pincount: 40

src/es/overlay/ab-io-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 32 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/schematic.pdf
 buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 image: 'ab-io-pi-plus.png'
 pincount: 40

src/es/overlay/ab-io-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 image: 'ab-io-pi-zero.png'
 pincount: 40

src/es/overlay/ab-rs485-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS485 Converter
 url: https://www.abelectronics.co.uk/p/77/RS485-Pi
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
 image: 'ab-rs485-pi.png'
 pincount: 40

src/es/overlay/ab-rtc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 image: 'ab-rtc-pi-plus.png'
 pincount: 40

src/es/overlay/ab-rtc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 image: 'ab-rtc-pi-zero.png'
 pincount: 40

src/es/overlay/ab-serial-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
 buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 image: 'ab-serial-pi-plus.png'
 pincount: 40

src/es/overlay/ab-serial-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 image: 'ab-serial-pi-zero.png'
 pincount: 40

src/es/overlay/ab-servo-pwm-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16-channel, 12-bit PWM Controller
 url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 image: 'ab-servo-pi-zero.png'
 pincount: 40

src/es/overlay/sense-hat.md

@@ -5,12 +5,12 @@ class: board
 type: led,sensor
 formfactor: HAT
 manufacturer: Raspberry Pi
-image: 'sense-hat.png'
 description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
 url: https://www.raspberrypi.org/products/sense-hat/
 github: https://github.com/RPi-Distro/python-sense-hat
 schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
 buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
+image: 'sense-hat.png'
 pincount: 40
 eeprom: setup
 power:

src/fr/overlay/ab-1-wire-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire vers interface I2C
 url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 image: 'ab-1-wire-pi-plus.png'
 pincount: 40

src/fr/overlay/ab-1-wire-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire vers interface I2C
 url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 image: 'ab-1-wire-pi-zero.png'
 pincount: 40

src/fr/overlay/ab-adc-differential-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 canaux Analogiques vers un convertisseur Digital
 url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-differential-pi.png'
 pincount: 40

src/fr/overlay/ab-adc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 canaux Analogiques vers un convertisseur Digital
 url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-plus.png'
 pincount: 40

src/fr/overlay/ab-adc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 canaux Analogiques vers un convertisseur Digital
 url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
 buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-zero.png'
 pincount: 40

src/fr/overlay/ab-adcdac-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 2 canaux Analogiques vers un Convertisseur Digital et 2 canaux Digitaux vers un Convertisseur Analogiques
 url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 image: 'ab-adcdac-pi-zero.png'
 pincount: 40

src/fr/overlay/ab-rtc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Module Horloge pour le Raspberry Pi
 url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 image: 'ab-rtc-pi-zero.png'
 pincount: 40

src/fr/translate/ab-io-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 32 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 image: 'ab-io-pi-plus.png'
 pincount: 40
@@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/fr/translate/ab-io-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 image: 'ab-io-pi-zero.png'
 pincount: 40
@@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/fr/translate/ab-rs485-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS485 Converter
 url: https://www.abelectronics.co.uk/p/77/RS485-Pi
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
 image: 'ab-rs485-pi.png'
 pincount: 40
@@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/fr/translate/ab-rtc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 image: 'ab-rtc-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/fr/translate/ab-serial-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
 buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 image: 'ab-serial-pi-plus.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/fr/translate/ab-serial-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 image: 'ab-serial-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/fr/translate/ab-servo-pwm-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16-channel, 12-bit PWM Controller
 url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 image: 'ab-servo-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
 
 The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/fr/translate/sense-hat.md

@@ -5,12 +5,12 @@ class: board
 type: led,sensor
 formfactor: HAT
 manufacturer: Raspberry Pi
-image: 'sense-hat.png'
 description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
 url: https://www.raspberrypi.org/products/sense-hat/
 github: https://github.com/RPi-Distro/python-sense-hat
 schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
 buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
+image: 'sense-hat.png'
 pincount: 40
 eeprom: setup
 power:

src/it/translate/ab-1-wire-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 image: 'ab-1-wire-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wi
 
 I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
 
-[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")

src/it/translate/ab-1-wire-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 image: 'ab-1-wire-pi-zero.png'
 pincount: 40
@@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wi
 
 I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
 
-[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")

src/it/translate/ab-adc-differential-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-differential-pi.png'
 pincount: 40
@@ -59,4 +60,4 @@ The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter des
     - 240 SPS (12 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.

src/it/translate/ab-adc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-plus.png'
 pincount: 40
@@ -59,4 +60,4 @@ The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to
    - 240 SPS (11 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/it/translate/ab-adc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
 buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-zero.png'
 pincount: 40
@@ -57,4 +58,4 @@ The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to
    - 240 SPS (11 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/it/translate/ab-adcdac-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
 url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 image: 'ab-adcdac-pi-zero.png'
 pincount: 40
@@ -48,4 +49,4 @@ Max ADC Sample Rate: 100 ksamples/sec
 
 Max ADC Sample Rate under Python: 12,000 samples per second.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/it/translate/ab-io-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 32 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 image: 'ab-io-pi-plus.png'
 pincount: 40
@@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/it/translate/ab-io-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 image: 'ab-io-pi-zero.png'
 pincount: 40
@@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/it/translate/ab-rs485-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS485 Converter
 url: https://www.abelectronics.co.uk/p/77/RS485-Pi
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
 image: 'ab-rs485-pi.png'
 pincount: 40
@@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/it/translate/ab-rtc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 image: 'ab-rtc-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/it/translate/ab-rtc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 image: 'ab-rtc-pi-zero.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Zero is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/it/translate/ab-serial-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
 buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 image: 'ab-serial-pi-plus.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/it/translate/ab-serial-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 image: 'ab-serial-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/it/translate/ab-servo-pwm-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16-channel, 12-bit PWM Controller
 url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 image: 'ab-servo-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
 
 The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/it/translate/sense-hat.md

@@ -5,12 +5,12 @@ class: board
 type: led,sensor
 formfactor: HAT
 manufacturer: Raspberry Pi
-image: 'sense-hat.png'
 description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
 url: https://www.raspberrypi.org/products/sense-hat/
 github: https://github.com/RPi-Distro/python-sense-hat
 schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
 buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
+image: 'sense-hat.png'
 pincount: 40
 eeprom: setup
 power:

src/tr/translate/ab-1-wire-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
 image: 'ab-1-wire-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wi
 
 I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
 
-[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")

src/tr/translate/ab-1-wire-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 1-Wire to I2C host interface
 url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
 image: 'ab-1-wire-pi-zero.png'
 pincount: 40
@@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wi
 
 I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
 
-[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
+[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")

src/tr/translate/ab-adc-differential-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-differential-pi.png'
 pincount: 40
@@ -59,4 +60,4 @@ The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter des
     - 240 SPS (12 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.

src/tr/translate/ab-adc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-plus.png'
 pincount: 40
@@ -59,4 +60,4 @@ The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to
    - 240 SPS (11 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/tr/translate/ab-adc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 8 channel Analogue to Digital Converter
 url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
 buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
 image: 'ab-adc-pi-zero.png'
 pincount: 40
@@ -57,4 +58,4 @@ The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to
    - 240 SPS (11 bits)
 - One-Shot or Continuous Conversion Options
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/tr/translate/ab-adcdac-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
 url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
 image: 'ab-adcdac-pi-zero.png'
 pincount: 40
@@ -48,4 +49,4 @@ Max ADC Sample Rate: 100 ksamples/sec
 
 Max ADC Sample Rate under Python: 12,000 samples per second.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/tr/translate/ab-io-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 32 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
 image: 'ab-io-pi-plus.png'
 pincount: 40
@@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/tr/translate/ab-io-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16 Channel Digital Expansion Board
 url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
 image: 'ab-io-pi-zero.png'
 pincount: 40
@@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
 -  Configurable interrupt source  - Interrupt-on-change from configured register defaults  or pin changes
 -  Polarity Inversion register to configure the polarity of the input port data
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/tr/translate/ab-rs485-pi.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS485 Converter
 url: https://www.abelectronics.co.uk/p/77/RS485-Pi
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
 image: 'ab-rs485-pi.png'
 pincount: 40
@@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/tr/translate/ab-rtc-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
 image: 'ab-rtc-pi-plus.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/tr/translate/ab-rtc-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: Real-Time Clock Module for the Raspberry Pi
 url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
 image: 'ab-rtc-pi-zero.png'
 pincount: 40
@@ -42,4 +43,4 @@ The RTC Pi Zero is powered through the host Raspberry Pi using the GPIO port and
 
 Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/tr/translate/ab-serial-pi-plus.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
 buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
 image: 'ab-serial-pi-plus.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/tr/translate/ab-serial-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: UART to RS232 Converter
 url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
 image: 'ab-serial-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
 - Stackable with other Raspberry Pi accessory boards.
 - Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
 
-[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
+[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)

src/tr/translate/ab-servo-pwm-pi-zero.md

@@ -8,6 +8,7 @@ manufacturer: AB Electronics
 description: 16-channel, 12-bit PWM Controller
 url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 github: https://github.com/abelectronicsuk
+schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
 buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
 image: 'ab-servo-pi-zero.png'
 pincount: 40
@@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
 
 The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
 
-Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
+Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.

src/tr/translate/sense-hat.md

@@ -5,12 +5,12 @@ class: board
 type: led,sensor
 formfactor: HAT
 manufacturer: Raspberry Pi
-image: 'sense-hat.png'
 description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
 url: https://www.raspberrypi.org/products/sense-hat/
 github: https://github.com/RPi-Distro/python-sense-hat
 schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
 buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
+image: 'sense-hat.png'
 pincount: 40
 eeprom: setup
 power: