schematic for all AB boards
This commit is contained in:
parent
cdafe10ad3
commit
e0c0f727ac
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
image: 'ab-1-wire-pi-plus.png'
|
image: 'ab-1-wire-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wi
|
||||||
|
|
||||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
||||||
|
|
||||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
image: 'ab-1-wire-pi-zero.png'
|
image: 'ab-1-wire-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wi
|
||||||
|
|
||||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
||||||
|
|
||||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-differential-pi.png'
|
image: 'ab-adc-differential-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -59,4 +60,4 @@ The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter des
|
||||||
- 240 SPS (12 bits)
|
- 240 SPS (12 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-plus.png'
|
image: 'ab-adc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -59,4 +60,4 @@ The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to
|
||||||
- 240 SPS (11 bits)
|
- 240 SPS (11 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-zero.png'
|
image: 'ab-adc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -57,4 +58,4 @@ The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to
|
||||||
- 240 SPS (11 bits)
|
- 240 SPS (11 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
||||||
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
image: 'ab-adcdac-pi-zero.png'
|
image: 'ab-adcdac-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -48,4 +49,4 @@ Max ADC Sample Rate: 100 ksamples/sec
|
||||||
|
|
||||||
Max ADC Sample Rate under Python: 12,000 samples per second.
|
Max ADC Sample Rate under Python: 12,000 samples per second.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 32 Channel Digital Expansion Board
|
description: 32 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
image: 'ab-io-pi-plus.png'
|
image: 'ab-io-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16 Channel Digital Expansion Board
|
description: 16 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
image: 'ab-io-pi-zero.png'
|
image: 'ab-io-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS485 Converter
|
description: UART to RS485 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
image: 'ab-rs485-pi.png'
|
image: 'ab-rs485-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
image: 'ab-rtc-pi-plus.png'
|
image: 'ab-rtc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
image: 'ab-rtc-pi-zero.png'
|
image: 'ab-rtc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Zero is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
image: 'ab-serial-pi-plus.png'
|
image: 'ab-serial-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
image: 'ab-serial-pi-zero.png'
|
image: 'ab-serial-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16-channel, 12-bit PWM Controller
|
description: 16-channel, 12-bit PWM Controller
|
||||||
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
image: 'ab-servo-pi-zero.png'
|
image: 'ab-servo-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
|
||||||
|
|
||||||
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -5,12 +5,12 @@ class: board
|
||||||
type: led,sensor
|
type: led,sensor
|
||||||
formfactor: HAT
|
formfactor: HAT
|
||||||
manufacturer: Raspberry Pi
|
manufacturer: Raspberry Pi
|
||||||
image: 'sense-hat.png'
|
|
||||||
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
||||||
url: https://www.raspberrypi.org/products/sense-hat/
|
url: https://www.raspberrypi.org/products/sense-hat/
|
||||||
github: https://github.com/RPi-Distro/python-sense-hat
|
github: https://github.com/RPi-Distro/python-sense-hat
|
||||||
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
||||||
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
||||||
|
image: 'sense-hat.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: setup
|
eeprom: setup
|
||||||
power:
|
power:
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
image: 'ab-1-wire-pi-plus.png'
|
image: 'ab-1-wire-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wi
|
||||||
|
|
||||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
||||||
|
|
||||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
image: 'ab-1-wire-pi-zero.png'
|
image: 'ab-1-wire-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wi
|
||||||
|
|
||||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
||||||
|
|
||||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-differential-pi.png'
|
image: 'ab-adc-differential-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -59,4 +60,4 @@ The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter des
|
||||||
- 240 SPS (12 bits)
|
- 240 SPS (12 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-plus.png'
|
image: 'ab-adc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -59,4 +60,4 @@ The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to
|
||||||
- 240 SPS (11 bits)
|
- 240 SPS (11 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-zero.png'
|
image: 'ab-adc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -57,4 +58,4 @@ The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to
|
||||||
- 240 SPS (11 bits)
|
- 240 SPS (11 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
||||||
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
image: 'ab-adcdac-pi-zero.png'
|
image: 'ab-adcdac-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -48,4 +49,4 @@ Max ADC Sample Rate: 100 ksamples/sec
|
||||||
|
|
||||||
Max ADC Sample Rate under Python: 12,000 samples per second.
|
Max ADC Sample Rate under Python: 12,000 samples per second.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 32 Channel Digital Expansion Board
|
description: 32 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
image: 'ab-io-pi-plus.png'
|
image: 'ab-io-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16 Channel Digital Expansion Board
|
description: 16 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
image: 'ab-io-pi-zero.png'
|
image: 'ab-io-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS485 Converter
|
description: UART to RS485 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
image: 'ab-rs485-pi.png'
|
image: 'ab-rs485-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
image: 'ab-rtc-pi-plus.png'
|
image: 'ab-rtc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
image: 'ab-rtc-pi-zero.png'
|
image: 'ab-rtc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Zero is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
image: 'ab-serial-pi-plus.png'
|
image: 'ab-serial-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
image: 'ab-serial-pi-zero.png'
|
image: 'ab-serial-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16-channel, 12-bit PWM Controller
|
description: 16-channel, 12-bit PWM Controller
|
||||||
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
image: 'ab-servo-pi-zero.png'
|
image: 'ab-servo-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
|
||||||
|
|
||||||
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -5,12 +5,12 @@ class: board
|
||||||
type: led,sensor
|
type: led,sensor
|
||||||
formfactor: HAT
|
formfactor: HAT
|
||||||
manufacturer: Raspberry Pi
|
manufacturer: Raspberry Pi
|
||||||
image: 'sense-hat.png'
|
|
||||||
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
||||||
url: https://www.raspberrypi.org/products/sense-hat/
|
url: https://www.raspberrypi.org/products/sense-hat/
|
||||||
github: https://github.com/RPi-Distro/python-sense-hat
|
github: https://github.com/RPi-Distro/python-sense-hat
|
||||||
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
||||||
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
||||||
|
image: 'sense-hat.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: setup
|
eeprom: setup
|
||||||
power:
|
power:
|
||||||
|
|
|
@ -41,7 +41,7 @@ strings:
|
||||||
- boards_subtitle: 'Click on a HAT, pHAT or add-on for more details and to see which pins it uses!'
|
- boards_subtitle: 'Click on a HAT, pHAT or add-on for more details and to see which pins it uses!'
|
||||||
featured:
|
featured:
|
||||||
- pijack
|
- pijack
|
||||||
- ab-servo-pwm-pi-zero
|
- mote-phat
|
||||||
- 4tronix-picon-zero
|
- 4tronix-picon-zero
|
||||||
- wifi-pants
|
- wifi-pants
|
||||||
overlays:
|
overlays:
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.png
|
||||||
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
image: 'ab-1-wire-pi-plus.png'
|
image: 'ab-1-wire-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.png
|
||||||
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
image: 'ab-1-wire-pi-zero.png'
|
image: 'ab-1-wire-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-differential-pi.png'
|
image: 'ab-adc-differential-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-plus.png'
|
image: 'ab-adc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-zero.png'
|
image: 'ab-adc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
||||||
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
image: 'ab-adcdac-pi-zero.png'
|
image: 'ab-adcdac-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 32 Channel Digital Expansion Board
|
description: 32 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
image: 'ab-io-pi-plus.png'
|
image: 'ab-io-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16 Channel Digital Expansion Board
|
description: 16 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
image: 'ab-io-pi-zero.png'
|
image: 'ab-io-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS485 Converter
|
description: UART to RS485 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
image: 'ab-rs485-pi.png'
|
image: 'ab-rs485-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
image: 'ab-rtc-pi-plus.png'
|
image: 'ab-rtc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
image: 'ab-rtc-pi-zero.png'
|
image: 'ab-rtc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
image: 'ab-serial-pi-plus.png'
|
image: 'ab-serial-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
image: 'ab-serial-pi-zero.png'
|
image: 'ab-serial-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16-channel, 12-bit PWM Controller
|
description: 16-channel, 12-bit PWM Controller
|
||||||
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
image: 'ab-servo-pi-zero.png'
|
image: 'ab-servo-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -5,12 +5,12 @@ class: board
|
||||||
type: led,sensor
|
type: led,sensor
|
||||||
formfactor: HAT
|
formfactor: HAT
|
||||||
manufacturer: Raspberry Pi
|
manufacturer: Raspberry Pi
|
||||||
image: 'sense-hat.png'
|
|
||||||
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
||||||
url: https://www.raspberrypi.org/products/sense-hat/
|
url: https://www.raspberrypi.org/products/sense-hat/
|
||||||
github: https://github.com/RPi-Distro/python-sense-hat
|
github: https://github.com/RPi-Distro/python-sense-hat
|
||||||
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
||||||
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
||||||
|
image: 'sense-hat.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: setup
|
eeprom: setup
|
||||||
power:
|
power:
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire vers interface I2C
|
description: 1-Wire vers interface I2C
|
||||||
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
image: 'ab-1-wire-pi-plus.png'
|
image: 'ab-1-wire-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire vers interface I2C
|
description: 1-Wire vers interface I2C
|
||||||
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
image: 'ab-1-wire-pi-zero.png'
|
image: 'ab-1-wire-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 canaux Analogiques vers un convertisseur Digital
|
description: 8 canaux Analogiques vers un convertisseur Digital
|
||||||
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-differential-pi.png'
|
image: 'ab-adc-differential-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 canaux Analogiques vers un convertisseur Digital
|
description: 8 canaux Analogiques vers un convertisseur Digital
|
||||||
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-plus.png'
|
image: 'ab-adc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 canaux Analogiques vers un convertisseur Digital
|
description: 8 canaux Analogiques vers un convertisseur Digital
|
||||||
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-zero.png'
|
image: 'ab-adc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 2 canaux Analogiques vers un Convertisseur Digital et 2 canaux Digitaux vers un Convertisseur Analogiques
|
description: 2 canaux Analogiques vers un Convertisseur Digital et 2 canaux Digitaux vers un Convertisseur Analogiques
|
||||||
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
image: 'ab-adcdac-pi-zero.png'
|
image: 'ab-adcdac-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Module Horloge pour le Raspberry Pi
|
description: Module Horloge pour le Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
image: 'ab-rtc-pi-zero.png'
|
image: 'ab-rtc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 32 Channel Digital Expansion Board
|
description: 32 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
image: 'ab-io-pi-plus.png'
|
image: 'ab-io-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16 Channel Digital Expansion Board
|
description: 16 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
image: 'ab-io-pi-zero.png'
|
image: 'ab-io-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS485 Converter
|
description: UART to RS485 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
image: 'ab-rs485-pi.png'
|
image: 'ab-rs485-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
image: 'ab-rtc-pi-plus.png'
|
image: 'ab-rtc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
image: 'ab-serial-pi-plus.png'
|
image: 'ab-serial-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
image: 'ab-serial-pi-zero.png'
|
image: 'ab-serial-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16-channel, 12-bit PWM Controller
|
description: 16-channel, 12-bit PWM Controller
|
||||||
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
image: 'ab-servo-pi-zero.png'
|
image: 'ab-servo-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
|
||||||
|
|
||||||
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -5,12 +5,12 @@ class: board
|
||||||
type: led,sensor
|
type: led,sensor
|
||||||
formfactor: HAT
|
formfactor: HAT
|
||||||
manufacturer: Raspberry Pi
|
manufacturer: Raspberry Pi
|
||||||
image: 'sense-hat.png'
|
|
||||||
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
||||||
url: https://www.raspberrypi.org/products/sense-hat/
|
url: https://www.raspberrypi.org/products/sense-hat/
|
||||||
github: https://github.com/RPi-Distro/python-sense-hat
|
github: https://github.com/RPi-Distro/python-sense-hat
|
||||||
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
||||||
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
||||||
|
image: 'sense-hat.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: setup
|
eeprom: setup
|
||||||
power:
|
power:
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
image: 'ab-1-wire-pi-plus.png'
|
image: 'ab-1-wire-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wi
|
||||||
|
|
||||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
||||||
|
|
||||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
image: 'ab-1-wire-pi-zero.png'
|
image: 'ab-1-wire-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wi
|
||||||
|
|
||||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
||||||
|
|
||||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-differential-pi.png'
|
image: 'ab-adc-differential-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -59,4 +60,4 @@ The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter des
|
||||||
- 240 SPS (12 bits)
|
- 240 SPS (12 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-plus.png'
|
image: 'ab-adc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -59,4 +60,4 @@ The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to
|
||||||
- 240 SPS (11 bits)
|
- 240 SPS (11 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-zero.png'
|
image: 'ab-adc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -57,4 +58,4 @@ The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to
|
||||||
- 240 SPS (11 bits)
|
- 240 SPS (11 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
||||||
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
image: 'ab-adcdac-pi-zero.png'
|
image: 'ab-adcdac-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -48,4 +49,4 @@ Max ADC Sample Rate: 100 ksamples/sec
|
||||||
|
|
||||||
Max ADC Sample Rate under Python: 12,000 samples per second.
|
Max ADC Sample Rate under Python: 12,000 samples per second.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 32 Channel Digital Expansion Board
|
description: 32 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
image: 'ab-io-pi-plus.png'
|
image: 'ab-io-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16 Channel Digital Expansion Board
|
description: 16 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
image: 'ab-io-pi-zero.png'
|
image: 'ab-io-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS485 Converter
|
description: UART to RS485 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
image: 'ab-rs485-pi.png'
|
image: 'ab-rs485-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
image: 'ab-rtc-pi-plus.png'
|
image: 'ab-rtc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
image: 'ab-rtc-pi-zero.png'
|
image: 'ab-rtc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Zero is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
image: 'ab-serial-pi-plus.png'
|
image: 'ab-serial-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
image: 'ab-serial-pi-zero.png'
|
image: 'ab-serial-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16-channel, 12-bit PWM Controller
|
description: 16-channel, 12-bit PWM Controller
|
||||||
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
image: 'ab-servo-pi-zero.png'
|
image: 'ab-servo-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
|
||||||
|
|
||||||
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -5,12 +5,12 @@ class: board
|
||||||
type: led,sensor
|
type: led,sensor
|
||||||
formfactor: HAT
|
formfactor: HAT
|
||||||
manufacturer: Raspberry Pi
|
manufacturer: Raspberry Pi
|
||||||
image: 'sense-hat.png'
|
|
||||||
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
||||||
url: https://www.raspberrypi.org/products/sense-hat/
|
url: https://www.raspberrypi.org/products/sense-hat/
|
||||||
github: https://github.com/RPi-Distro/python-sense-hat
|
github: https://github.com/RPi-Distro/python-sense-hat
|
||||||
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
||||||
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
||||||
|
image: 'sense-hat.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: setup
|
eeprom: setup
|
||||||
power:
|
power:
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepiplus/1-wire-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/60/1-Wire-Pi-Plus
|
||||||
image: 'ab-1-wire-pi-plus.png'
|
image: 'ab-1-wire-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wi
|
||||||
|
|
||||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
||||||
|
|
||||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 1-Wire to I2C host interface
|
description: 1-Wire to I2C host interface
|
||||||
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/1wirepizero/1wirepizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/76/1-Wire-Pi-Zero
|
||||||
image: 'ab-1-wire-pi-zero.png'
|
image: 'ab-1-wire-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wi
|
||||||
|
|
||||||
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Zero allowing the board to be used with other I2C devices on the same bus.
|
||||||
|
|
||||||
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdifferentialpi/adc-differential-pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/65/ADC-Differential-Pi-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-differential-pi.png'
|
image: 'ab-adc-differential-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -59,4 +60,4 @@ The ADC Differential Pi is an 8 channel 18 bit analogue to digital converter des
|
||||||
- 240 SPS (12 bits)
|
- 240 SPS (12 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpiplus/adc-pi-plus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/56/ADC-Pi-Plus-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-plus.png'
|
image: 'ab-adc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -59,4 +60,4 @@ The ADC Pi Plus is an 8 channel 17 bit analogue to digital converter designed to
|
||||||
- 240 SPS (11 bits)
|
- 240 SPS (11 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 8 channel Analogue to Digital Converter
|
description: 8 channel Analogue to Digital Converter
|
||||||
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
url: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcpizero/adcpizero_schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
buy: https://www.abelectronics.co.uk/p/69/ADC-Pi-Zero-Raspberry-Pi-Analogue-to-Digital-converter
|
||||||
image: 'ab-adc-pi-zero.png'
|
image: 'ab-adc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -57,4 +58,4 @@ The ADC Pi Zero is an 8 channel 17 bit analogue to digital converter designed to
|
||||||
- 240 SPS (11 bits)
|
- 240 SPS (11 bits)
|
||||||
- One-Shot or Continuous Conversion Options
|
- One-Shot or Continuous Conversion Options
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
description: 2 channel Analogue to Digital Converter and 2 channel Digital to Analogue Converter
|
||||||
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
url: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/adcdacpizero/adcdacpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
buy: https://www.abelectronics.co.uk/p/74/ADC-DAC-Pi-Zero-Raspberry-Pi-ADC-and-DAC-expansion-board
|
||||||
image: 'ab-adcdac-pi-zero.png'
|
image: 'ab-adcdac-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -48,4 +49,4 @@ Max ADC Sample Rate: 100 ksamples/sec
|
||||||
|
|
||||||
Max ADC Sample Rate under Python: 12,000 samples per second.
|
Max ADC Sample Rate under Python: 12,000 samples per second.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 32 Channel Digital Expansion Board
|
description: 32 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopiplus/IOPiplus-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/54/IO-Pi-Plus
|
||||||
image: 'ab-io-pi-plus.png'
|
image: 'ab-io-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -56,4 +57,4 @@ A pair of MCP23017 expanders are included on the board allowing you to connect u
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16 Channel Digital Expansion Board
|
description: 16 Channel Digital Expansion Board
|
||||||
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/iopizero/iopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/71/IO-Pi-Zero
|
||||||
image: 'ab-io-pi-zero.png'
|
image: 'ab-io-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -53,4 +54,4 @@ The IO Pi Zero Expander is powered through the host Raspberry Pi using the GPIO
|
||||||
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
- Configurable interrupt source - Interrupt-on-change from configured register defaults or pin changes
|
||||||
- Polarity Inversion register to configure the polarity of the input port data
|
- Polarity Inversion register to configure the polarity of the input port data
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS485 Converter
|
description: UART to RS485 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
url: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rs485pi/rs485pi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
buy: https://www.abelectronics.co.uk/p/77/RS485-Pi
|
||||||
image: 'ab-rs485-pi.png'
|
image: 'ab-rs485-pi.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -45,4 +46,4 @@ The RS485 Pi contains protection against voltage spikes in the form of a TVS Dio
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the UART communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpi/rtcpi-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/52/RTC-Pi-Plus
|
||||||
image: 'ab-rtc-pi-plus.png'
|
image: 'ab-rtc-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Plus is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: Real-Time Clock Module for the Raspberry Pi
|
description: Real-Time Clock Module for the Raspberry Pi
|
||||||
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/rtcpizero/rtcpi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/70/RTC-Pi-Zero
|
||||||
image: 'ab-rtc-pi-zero.png'
|
image: 'ab-rtc-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -42,4 +43,4 @@ The RTC Pi Zero is powered through the host Raspberry Pi using the GPIO port and
|
||||||
|
|
||||||
Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
Unlike most other DS1307 based RTC modules the RTC Pi Zero also includes an I2C logic level converter allowing you to connect other 5V I2C devices to your Raspberry Pi.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
url: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpiplus/schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
buy: https://www.abelectronics.co.uk/p/51/Serial-Pi-Plus
|
||||||
image: 'ab-serial-pi-plus.png'
|
image: 'ab-serial-pi-plus.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi A+, Raspberry Pi B+ and Raspberry Pi 2 and Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: UART to RS232 Converter
|
description: UART to RS232 Converter
|
||||||
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/serialpizero/serialpizero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/75/Serial-Pi-Zero
|
||||||
image: 'ab-serial-pi-zero.png'
|
image: 'ab-serial-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The RS232 port is connected to the UART port on the Raspberry Pi using a MAX3232
|
||||||
- Stackable with other Raspberry Pi accessory boards.
|
- Stackable with other Raspberry Pi accessory boards.
|
||||||
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
- Mounting holes for use with the AB Electronics UK mounting kits (sold separately)
|
||||||
|
|
||||||
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
[Configuring the RS232 communication on the Raspberry Pi](https://www.abelectronics.co.uk/kb/article/20/raspberry-pi-serial-port-usage)
|
||||||
|
|
|
@ -8,6 +8,7 @@ manufacturer: AB Electronics
|
||||||
description: 16-channel, 12-bit PWM Controller
|
description: 16-channel, 12-bit PWM Controller
|
||||||
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
url: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
github: https://github.com/abelectronicsuk
|
github: https://github.com/abelectronicsuk
|
||||||
|
schematic: https://www.abelectronics.co.uk/docs/stock/raspberrypi/servopizero/servopi-zero-schematic.pdf
|
||||||
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
buy: https://www.abelectronics.co.uk/p/72/Servo-PWM-Pi-Zero
|
||||||
image: 'ab-servo-pi-zero.png'
|
image: 'ab-servo-pi-zero.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
|
@ -41,4 +42,4 @@ The Servo PWM Pi Zero is a 16-channel, 12-bit PWM controller for the Raspberry P
|
||||||
|
|
||||||
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
The output frequency is programmable from a typical 40Hz to 1000Hz. Each output driver is programmed to be either open-drain with a 22 mA current sink capability at 5 V or totem pole with a 22 mA sink, 10 mA source capability at 5 V. 220R current limiting resistors are used on each channel allowing you to connect servos or LEDs directly to the outputs.
|
||||||
|
|
||||||
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
Arduino, C, Node.js, Windows 10 IOT, Python 2 and Python 3 libraries are available on GitHub.
|
||||||
|
|
|
@ -5,12 +5,12 @@ class: board
|
||||||
type: led,sensor
|
type: led,sensor
|
||||||
formfactor: HAT
|
formfactor: HAT
|
||||||
manufacturer: Raspberry Pi
|
manufacturer: Raspberry Pi
|
||||||
image: 'sense-hat.png'
|
|
||||||
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
description: Add-on board that includes an 8×8 RGB LED matrix, 5-button joystick as well as IMU and environmental sensors
|
||||||
url: https://www.raspberrypi.org/products/sense-hat/
|
url: https://www.raspberrypi.org/products/sense-hat/
|
||||||
github: https://github.com/RPi-Distro/python-sense-hat
|
github: https://github.com/RPi-Distro/python-sense-hat
|
||||||
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
schematic: https://www.raspberrypi.org/documentation/hardware/sense-hat/images/Sense-HAT-V1_0.pdf
|
||||||
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
buy: https://thepihut.com/products/raspberry-pi-sense-hat-astro-pi
|
||||||
|
image: 'sense-hat.png'
|
||||||
pincount: 40
|
pincount: 40
|
||||||
eeprom: setup
|
eeprom: setup
|
||||||
power:
|
power:
|
||||||
|
|
Loading…
Reference in New Issue