pinout.vvzero.com/draft/overlay/JuiceBoxZero.md
2018-11-09 12:11:32 -07:00

49 lines
2.0 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<!--
---
name: JuiceBox Zero
class: board
type: ups
formfactor: HAT
manufacturer: JuiceBox Zero
description: JuiceBox Zero uninterruptible power supply for the Raspberry Pi Zero and Zero W.
url: https://juiceboxzero.com/
github: https://github.com/JuiceBoxZero
buy: https://juiceboxzero.com/product/juicebox-zero-battery-management-board/
image: 'JuiceBoxZero.png'
pincount: 40
eeprom: no
power:
'1':
'2':
ground:
'6':
'9':
'14':
'20':
'25':
'30':
'34':
'39':
pin:
'16':
mode: Low Battery
'25':
mode: Alternate Low Battery
-->
#JuiceBox Zero
JuiceBox Zero is designed specifically for the Raspberry Pi Zero to let you power it from a battery. Its the simplest way to properly power your Pi Zero with a battery. It is the only battery management board in this form factor that requires no code. With JuiceBox Zero, you get the best solution for instant Pi Zero portability. It comes with an on/off switch, status indicator LED and Pi Zero Camera mount built right in!
Battery and Raspberry Pi Zero not included. All you need to get started is your JuiceBox Zero, a Raspberry Pi Zero or Zero W, a stacking or non-stacking header connection, and a JSTcompatible, singlecell lithiumion battery
* Compatible with any 3.7 to 4.2V Lithium-Ion or Lithium-Polymer battery with a JST PH connector, 1A Current Output and 1A Charge rate
* The simplest uninterruptable power supply solution
* Requires a 5V micro USB power supply, and can draw up to 2A.
* Smart power supply selection: it can charge the battery and power the Raspberry Pi at the same time
* Compatible with both Raspberry Pi Zero and Pi Zero W models. Possibly suitable for powering other Pi models (depends on application)
* Integrated on/off switch
* Charge/power status indicator LEDs
* No programming neecessary
* Low power deep-sleep state with wake on interrupt/calendar event
* Compatible with any single cell LiPo or LiIon battery witha JST, PH connector (check out Adafruit's batteries!)