68 lines
1.8 KiB
Markdown
68 lines
1.8 KiB
Markdown
<!--
|
|
---
|
|
name: Adafruit Arcade Bonnet
|
|
class: board
|
|
type: IO
|
|
formfactor: PHAT
|
|
manufacturer: Adafruit
|
|
description: Connect joystick,buttons and speakers to your pi
|
|
url: https://learn.adafruit.com/adafruit-arcade-bonnet-for-raspberry-pi
|
|
buy: https://www.adafruit.com/products/3422
|
|
image: arcade_bonnet.png
|
|
pincount: 40
|
|
eeprom: no
|
|
power:
|
|
'2':
|
|
'1':
|
|
'4':
|
|
'17':
|
|
|
|
|
|
ground:
|
|
'6':
|
|
'9':
|
|
'14':
|
|
'20':
|
|
'30':
|
|
'34':
|
|
'39':
|
|
'25':
|
|
pin:
|
|
'3':
|
|
mode:SDA
|
|
'5':
|
|
mode:SCL
|
|
'11':
|
|
mode:I2S
|
|
'12':
|
|
mode:I2S
|
|
'35':
|
|
mode:I2S
|
|
'40':
|
|
mode:I2S
|
|
i2c:
|
|
'0x26':
|
|
name: MCP23017
|
|
device: MCP23017
|
|
|
|
|
|
-->
|
|
#Adafruit Arcade Bonnet
|
|
|
|
This Adafruit Arcade Bonnet is designed to make small emulator projects a little easier to build. Here is some features!:
|
|
|
|
It is the same size as a Pi Zero, so for really compact builds, this is super small. You can use it with a Pi 2, 3, B+ or any 2x20 connector Pi.
|
|
It has JST sockets so you can plug in six arcade buttons easily
|
|
Header breakouts for use with both clicky-type switched joysticks and...
|
|
Header breakout and converter for using analog-type joysticks or thumbsticks with potentiometers inside
|
|
A 3W speaker output that can drive 4-8 ohm speakers for when using with a TV output, HDMI display or PiTFT
|
|
Switches are all managed with an I2C-GPIO converter with interrupt out. The converter is very fast and frees up all the pins so you can use this Bonnet with a PiTFT or any other accessory/device that uses a lot of pins!
|
|
|
|
To install:
|
|
```bash
|
|
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/arcade-bonnet.sh
|
|
sudo bash arcade-bonnet.sh
|
|
curl -sS https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/i2samp.sh | bash
|
|
```
|
|
|