81 lines
1.7 KiB
Markdown
81 lines
1.7 KiB
Markdown
<!--
|
|
---
|
|
name: 4tronix RoboHat
|
|
class: board
|
|
type: io,motor
|
|
formfactor: HAT
|
|
manufacturer: 4tronix
|
|
description: Robotics controller HAT
|
|
url: http://4tronix.co.uk/store/index.php?rt=product/product&product_id=547
|
|
github:
|
|
buy: http://4tronix.co.uk/store/index.php?rt=product/product&product_id=547
|
|
image: '4tronix-robohat.png'
|
|
pincount: 40
|
|
eeprom: yes
|
|
power:
|
|
'1':
|
|
'2':
|
|
'4':
|
|
ground:
|
|
'6':
|
|
'9':
|
|
'14':
|
|
'20':
|
|
'25':
|
|
'30':
|
|
'34':
|
|
'39':
|
|
pin:
|
|
'32':
|
|
name: MotorA_0
|
|
mode: output
|
|
'33':
|
|
name: MotorA_1
|
|
mode: output
|
|
'35':
|
|
name: MotorB_0
|
|
mode: output
|
|
'36':
|
|
name: MotorB_1
|
|
mode: output
|
|
'18':
|
|
name: out0
|
|
mode: output
|
|
active: high
|
|
'22':
|
|
name: out1
|
|
mode: output
|
|
active: high
|
|
'12':
|
|
name: out2
|
|
mode: output
|
|
active: high
|
|
'31':
|
|
name: out3
|
|
mode: output
|
|
active: high
|
|
'7':
|
|
name: in0
|
|
mode: input
|
|
'11':
|
|
name: in1
|
|
mode: input
|
|
'29':
|
|
name: in2
|
|
mode: input
|
|
'13':
|
|
name: in3
|
|
mode: input
|
|
'15':
|
|
name: in4
|
|
mode: input
|
|
'16':
|
|
name: in5
|
|
mode: input
|
|
'38':
|
|
name: Ultrasonic
|
|
mode: input/output
|
|
-->
|
|
#RoboHat
|
|
The RoboHat is a complete robot controller for small robots. It has 2 full H-bridges using DRV8833 for up to 1.5A per channel, a 5V switch-mode regulator to generate the 5V for the Raspberry Pi, 6 bufferened inputs that can accept 2.5V to 5.5V and convert to 3.3V and 4 outputs driven up to 5V. All the I/O is via GVS (Ground, Volts, Signal) 3-pin terminals so it is easy to plug in 3-pin sensors or small servos directly. There is also a connector plug in an HC-SR04 ultrasonic distance sensor with the necessary circuitry to read the value using a single GPIO pin.
|