89cef71a43
Modified JustBoom Amp Zero Renamed and modified details for Pi PoE this affects the png name too
52 lines
1.2 KiB
Markdown
52 lines
1.2 KiB
Markdown
<!--
|
||
---
|
||
name: My Add-on Board
|
||
class: board
|
||
type: gesture
|
||
formfactor: HAT
|
||
manufacturer: Pi Supply
|
||
description: Flick HAT is a 3D tracking and gesture pHAT.
|
||
url: https://www.pi-supply.com/product/flick-large-standalone-3d-tracking-gesture-breakout/
|
||
github: https://github.com/PiSupply/Flick
|
||
buy: https://www.pi-supply.com/product/flick-hat-3d-tracking-gesture-hat-raspberry-pi/
|
||
image: 'flick-hat.png'
|
||
pincount: 40
|
||
eeprom: setup
|
||
power:
|
||
'1':
|
||
'2':
|
||
ground:
|
||
'6':
|
||
'9':
|
||
'14':
|
||
'20':
|
||
'25':
|
||
'30':
|
||
'34':
|
||
'39':
|
||
pin:
|
||
'3':
|
||
mode: i2c
|
||
'5':
|
||
mode: i2c
|
||
'11':
|
||
name: Reset
|
||
'13':
|
||
name: TS
|
||
i2c:
|
||
'0x42':
|
||
name: Gesture controller
|
||
device: MGC3130
|
||
-->
|
||
#Flick HAT
|
||
Integrate Flick into your I2C project to give you multiple ways of controlling it. Using the near field gesture technology, you’re able to hide your project behind non conductive material (wood/acrylic) and still use Flick.
|
||
|
||
* 3D tracking
|
||
* Gesture sensing up to 15cm
|
||
* Touch and Tap sensing
|
||
* Communicates with the Raspberry Pi via I2C
|
||
* No soldering required
|
||
* Level shifting chip to enable board to work with 3V3 or 5V0 power and logic
|
||
* One line installer
|
||
* Fully CE and FCC tested and approved
|