2ea9ce2c64
Updates to the current expansion boards available from AB Electronics UK
48 lines
1.7 KiB
Markdown
48 lines
1.7 KiB
Markdown
<!--
|
|
---
|
|
name: 1 Wire Pi Plus
|
|
class: board
|
|
type: com
|
|
formfactor: Custom
|
|
manufacturer: AB Electronics UK
|
|
description: 1-Wire to I2C host interface
|
|
url: https://www.abelectronics.co.uk/p/60/1-wire-pi-plus
|
|
github: https://github.com/abelectronicsuk
|
|
schematic: https://www.abelectronics.co.uk/docs/pdf/schematic-1-wire-pi-plus-v2.pdf
|
|
buy: https://www.abelectronics.co.uk/p/60/1-wire-pi-plus
|
|
image: 'ab-1-wire-pi-plus.png'
|
|
pincount: 40
|
|
eeprom: no
|
|
power:
|
|
'1':
|
|
'2':
|
|
ground:
|
|
'6':
|
|
'9':
|
|
'14':
|
|
'20':
|
|
'25':
|
|
'30':
|
|
'34':
|
|
'39':
|
|
pin:
|
|
'3':
|
|
mode: i2c
|
|
'5':
|
|
mode: i2c
|
|
i2c:
|
|
'0x18':
|
|
alternate: ['0x19', '0x1A', '0x1B']
|
|
name: DS2482
|
|
device: DS2482-100
|
|
-->
|
|
#1 Wire Pi Plus
|
|
|
|
The 1 Wire Pi Plus from AB Electronics UK is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi. A 5V buffered I2C port is also provided on the board.
|
|
|
|
The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wire® bridge device. The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices. An ESD Protection Diode is used to protect the 1 Wire Pi Plus and Raspberry Pi from electrostatic spikes on the 1-Wire® port. Connections to the 1-Wire® port can be made through the RJ-12 socket or the solder points on the PCB.
|
|
|
|
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
|
|
|
|
[https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi](https://www.abelectronics.co.uk/kb/article/3/owfs-with-i2c-support-on-raspberry-pi "Configuring and using the 1-Wire® port on your Raspberry Pi")
|