89cef71a43
Modified JustBoom Amp Zero Renamed and modified details for Pi PoE this affects the png name too
56 lines
1.9 KiB
Markdown
56 lines
1.9 KiB
Markdown
<!--
|
|
---
|
|
name: Pi PoE Switch HAT
|
|
class: board
|
|
type: power
|
|
formfactor: HAT
|
|
manufacturer: Pi Supply
|
|
description: The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi
|
|
url: https://www.kickstarter.com/projects/pisupply/pi-poe-switch-hat-power-over-ethernet-for-raspberr
|
|
github: https://github.com/PiSupply/PiPoE
|
|
buy: https://www.pi-supply.com/product/pi-poe-switch-hat-power-over-ethernet-for-raspberry-pi/
|
|
image: 'pi-poe.png'
|
|
pincount: 40
|
|
eeprom: yes
|
|
power:
|
|
'1':
|
|
'2':
|
|
ground:
|
|
'6':
|
|
'9':
|
|
'14':
|
|
'20':
|
|
'25':
|
|
'30':
|
|
'34':
|
|
'39':
|
|
pin:
|
|
'11':
|
|
name: Power Management
|
|
'15':
|
|
name: LED Green/Yellow
|
|
'16':
|
|
name: LED Green
|
|
'18':
|
|
name: LED Yellow/Green
|
|
-->
|
|
#Pi PoE Switch HAT
|
|
The Pi PoE Switch HAT is an add on board for the Raspberry Pi that brings the Pi Supply Switch technology together with PoE all in one fantastic package!
|
|
|
|
You can now power your Raspberry Pi and provide an Ethernet connection in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.
|
|
|
|
* Fully 802.3af (mode A and B) compliant active power over Ethernet
|
|
* Contains physical layer power negotiation circuitry, presenting itself as a Class 0 device
|
|
* Fully isolated switched mode power supply (SMPS) - 1500V isolation input to output
|
|
* Overload and short circuit protection
|
|
* Over temperature protection
|
|
* High efficiency (up to 87%) regulated output
|
|
* Input voltage 36-56V, output voltage 5V, output current 10-1300mA, max output power 6.5W
|
|
* Onboard ATtiny 13A microcontroller for power management functionality
|
|
* Leaves all unused GPIO free for use with other add on boards
|
|
|
|
The onboard optional jumper toggles the power functionality:
|
|
|
|
* Jumper on. The Pi PoE will power on after holding the power button for two seconds
|
|
* Jumper off. The Pi PoE will power on as soon as you apply power from your injector
|