67 lines
1.6 KiB
Markdown
67 lines
1.6 KiB
Markdown
<!--
|
|
---
|
|
name: MotoZero
|
|
class: board
|
|
type: motor
|
|
formfactor: pHAT
|
|
manufacturer: The Pi Hut
|
|
description: Control 4 motors from your Raspberry Pi
|
|
url: https://thepihut.com/products/motozero
|
|
buy: https://thepihut.com/products/motozero
|
|
image: 'motozero.png'
|
|
pincount: 40
|
|
eeprom: no
|
|
power:
|
|
'2':
|
|
ground:
|
|
'6':
|
|
'9':
|
|
'14':
|
|
'20':
|
|
'25':
|
|
'30':
|
|
'34':
|
|
'39':
|
|
pin:
|
|
'29':
|
|
name: En1
|
|
'11':
|
|
name: En2
|
|
'32':
|
|
name: En3
|
|
'22':
|
|
name: En4
|
|
'18':
|
|
name: +1
|
|
'31':
|
|
name: +2
|
|
'16':
|
|
name: +3
|
|
'33':
|
|
name: +4
|
|
'13':
|
|
name: -1
|
|
'15':
|
|
name: -2
|
|
'36':
|
|
name: -3
|
|
'12':
|
|
name: -4
|
|
|
|
-->
|
|
# MotoZero
|
|
|
|
The MotoZero is a simple Raspberry Pi motor controller add-on board that lets you control up to 4 motors independently.
|
|
With simple GPIO control and its very own GPIO Zero library entry, it's one of the easiest ways to control lots of motors on your Raspberry Pi
|
|
|
|
Features:
|
|
|
|
* Control 4 motors independently in both forwards and reverse
|
|
* Control with basic GPIO 'on/off' code, or use the excellent GPIO Zero library
|
|
* Terminals break out the motor outputs to the edge of the board, ideal for wheeled and tracked robots
|
|
* Robust chunky terminal blocks for solid connections
|
|
* Pi Zero sized, although will fit all 40pin Raspberry Pi models
|
|
* Simply power your Pi the usual way (via the micro-USB connection using a plug, power bank or similar) and then add battery power for the motors.
|
|
* Built-in flyback diodes within the controller chips, which prevent damage from motor 'flyback' voltage spikes
|
|
|